Used Donaldson Filtration System for sale (43,918)

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. Nwedpfer A El Eex Ai Ton "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Year of construction: 2023, Manufacturer: TEKA, Type: ZPF 9H, Year of manufacture: 2023, Serial no. A22341310061001, 22 kW, Exhaust/piping system, Dust collection container, Welding fume class W3 Nsdpfoz Tn Edjx Ai Town +++ Subject to prior sale! +++ +++ Attention: This unit is part of an online auction! +++

Condition: used, Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate ● Treatment system for separating compressed air condensate and condensates with difficult separation properties (e.g., stable emulsions) using cross-flow filtration. ● Physical separation principle guarantees residual oil content of < 5 mg/l in water. ● Intelligent control concept with programmable controller for safe system operation, including plain text display via a text display, fault monitoring via alarm messages with potential-free contacts, and optional external network connection. ● Optimized cleaning through comparison of input/output extends cleaning intervals and saves operating costs. ● Thermally and chemically highly resistant ceramic membrane with a long service life. ● Frost protection with integrated heating. ● High-quality, corrosion-resistant materials for tanks, pipelines, pumps, seals, and valves. Manufacturer: Donaldson Ultrafilter Njdpfoidx Uiex Ai Tswn System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5.5 bar, pmax: 8.5 bar, Pneurop 4 Water: pmax: 5 bar Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C You can find other filtration systems in various sizes – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 10006472, total height: 2,200 mm, overall weight: 900 kg, space requirement length: 1,800 mm, space requirement width: 100 mm, Filter and extraction unit with automatic cleaning. Suitable for smoke extraction during laser, plasma, and oxy-fuel cutting, blasting, welding, grinding, and powder coating. Year of manufacture: 2020 Model: 10124806 Serial number: 10006472 Motor: 4 kW - 400 V Number of filter cartridges: 2 Raw gas inlet: 200-250 mm Raw gas outlet: 300 mm Width x Depth x Height: 1,200 x 1,800 x 2,200 mm Weight: 900 kg Note: Nedszwxanepfx Ai Tswn No warranty, installation, commissioning, and transport are included. Subject to prior sale.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Nwodozlh Auopfx Ai Tsn Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: good (used), Year of construction: 1987, functionality: limited functionality, machine/vehicle number: 63526, overall weight: 1,200 kg, operating temperature: 220 °C, year of last overhaul: 2022, For sale: Pfaudler Balfour filtration Nutsche, volume 300 L. Glass-lined reactor, jacketed, in working condition. Sales price 24,000 Euro, ex works. Can be inspected onsite in Zofingen, Switzerland. Nwjdpfey Igzkox Ai Ten

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. Nwsdpfx Aiezvlm Ej Ten TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Condition: used, Year of construction: 2017, Airflow: 27,000m³/h, filter area: 215m², filter load: 126m³/m²/h, number of filter bags: 204, number of filter sections with 36 bags: 5, number of filter sections with 24 bags: 1, number of air injection sections: 1, chain speed: 3.9m/min, drive shaft speed: 5rpm, max. material throughput: 20m³/h, regeneration carriage travel speed: 6m/min, chain conveyor motor power: 0.55kW, chain speed: 3.9m/min, max. material throughput: 20m³/h, regeneration fan motor power: 4kW, regeneration carriage motor power: 0.37kW, regeneration carriage travel speed: 6m/min, length: 4500mm, width: 2700mm, height: 6615mm, weight: 4.4t, including documentation. An on-site inspection is possible. Nsdps Adt H Hefx Ai Tewn

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1F12DOV1.4, COMAT X99 The Comat Superfiltration system is a professional plant for microfiltration of coolant and machining fluids, designed to operate in a closed-loop with CNC machines. Nsdpfx As Adl Tloi Town Technical data Model: 1F12DQV1.4 Weight: 820 kg Power: 7.5 kW Year of manufacture: 2006 Fluid circuit capacity: minimum 800 liters, maximum 1,200 liters Overhauled by a Comat technician in 2020 What is this machine exactly used for? 1. Deep, real-time microfiltration: removes fine chips, sludge, and metallic particles from the oil and emulsions, with filtration that can reach 3 µm or even lower values. 2. Maintenance of coolant cleanliness and properties: helps to preserve the quality of the emulsion and reduce the risk of bacterial proliferation and deterioration of the machining oil. 3. Cooling and thermal stabilization: it is equipped with an integrated cooling system that helps prevent overheating of the oil or coolant. 4. Continuous operation in bypass and closed-loop: the system can be connected directly to grinding machines, filtering the fluid during the production process without having to stop the machines. 5. Simultaneous connection to up to 4 machines. 6. Fluid circuit capacity: minimum 800 liters, maximum 1,200 liters. Benefits for your plant - Economic savings: significantly extends the life of the oil or emulsion, reducing the frequency of replacements and disposal costs. - Protection of tools and machines: clean coolant helps reduce wear on grinding wheels and grinding machine pumps. - Higher machining quality: reducing the micro-contaminant particles in the coolant helps improve the surface quality of the machined parts.

Year of construction: 2010, condition: used, machine/vehicle number: FLT16, Used OLIVEROGAR filtration systemTechnical Specifications & Performance DataThis industrial filtration and liquid-processing system is engineered for reliable, continuous operation in beverage production and industrial packaging environments. Designed by Oliverogar, it integrates multi-stage filtration with robust pumping and piping to support a wide range of liquid clarification and polishing tasks. Its compact footprint enables easy placement within existing production areas and seamless connection to upstream and downstream equipment on a used bottling line or new installation.Manufacturer: OliverogarMachine type: Industrial filtration and liquid-processing systemAutomation: Fully automated, multi-stage operationConstruction: Stainless steel frame and process assembliesProcess components: Integrated stainless-steel filtration tanksFluid handling: Heavy-duty process pump and industrial-grade pipingConfiguration: Compact, integrated multi-stage filtration layoutControl: Siemens PLC with industrial PC touchscreen HMIAdvanced Automation & Control SystemsThe system centers on a Siemens PLC for precise process control, recipe management, and interlocks, complemented by an industrial PC HMI with touchscreen for intuitive operation. The enclosed electrical control cabinet houses power distribution, I/O, and safety circuits for dependable performance and simplified troubleshooting.Programmable sequencing for multi-stage filtration stepsIndustrial PC operator panel for process visualization and alarmsIntegrated electrical control cabinet for clean, serviceable wiringAutomation-ready interfaces for line-wide start/stop and status exchangeDesigned to support quick adjustments and controlled ramp-up/down of pumpsProduction Line Integration CapabilitiesThis filtration platform connects easily to buffer tanks, mixing or syrup rooms, and downstream filling, labeling, and secondary packaging machinery. Its compact, modular design supports inline operation or standalone use as a polishing/clarification skid. It is suitable for beverage production environments focused on quality, throughput, and consistency, and integrates well into second hand or refurbished bottling equipment layouts.Inline or standalone operation with common utility connectionsCompatible with upstream storage/mixing tanks and downstream filling monoblocksMulti-stage configuration adaptable to various clarity targetsWell-suited for integration within a used bottling lineMachine Condition & Maintenance HistoryThe equipment is presented in ready-for-operation condition, supported by a fully integrated control cabinet and automated process control. Its stainless-steel build favors long service life, cleanability, and robust uptime in beverage and industrial environments.Operational Performance & VersatilityThe multi-stage internal configuration with specialized filter units and heavy-duty pumping enables consistent product quality and repeat... Nsdpfo Ady Ausx Ai Tewn

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central welding fume extraction Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62185 Year of manufacture: 2014 Nominal volumetric flow rate 3000 m³/h Nominal volumetric flow rate 50 m³/sec. Filter area 27 m² (9 units, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Njdoz Db Niepfx Ai Tswn Motor power 5.5 kW Power connection 400 Volt, 50 Hz. - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control system - Control cabinet fixed to the extraction system - 9 filter cartridges, type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter change - Radial fan installed at the top inside, type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) - Fire water connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: like new (used), Year of manufacture: 2011 Complete set of new filters included Model: DMC-MMB Njdpsxgnv Rjfx Ai Tswn Quantity: 7 units

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Nedpfxjz Nx S Ts Ai Tewn Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Stock number: 0018

Condition: used, This listing is for the Millipore MpodPilot Enerpac Pilotscale filtration system Nwsdpfx Aisxhgaqj Ten The unit is in full working condition and is ready for immediate use The Millipore MPODPILOT is a pilot-scale filtration system designed for laboratory and pilot plant applications. It is commonly used in processes such as microfiltration and ultrafiltration, particularly in the pharmaceutical and biotechnology industries. The system includes a filter holder capable of accommodating pod filters up to 2.2 m² in size

Condition: used, Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration units Trumpf Vectormark GREEN 532nm Trumpf VMc2 Nwsdpfx Aiezdqcue Tjn Laser marker, with frequency-doubled, diode-pumped Nd:YAG laser with Hurryscan 10 – galvo head from Scanlab Fuchs extraction and filtration units TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted to individual requirements Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: good (used), Cooling system – coolant system Manufacturer: Knoll Year of manufacture: 1991 Type: PF100 Serial number: 20/2901907/01 Tank: 1,560 x 830 x 270 mm Capacity: 400 l Roller tank: 800 x 370 x 360 mm Collection tank: 780 x 250 x 230 mm Pumps: 2 units Capacity: 100 l/min Roller width: 710 mm Maximum roller diameter: 170 mm Internal diameter: 70 mm Accessories: 5 rollers Overall dimensions: 1,660 x 950 x 800 mm Weight: 230 kg Nedpjz Hcpiofx Ai Town This system comes from a Walter tool grinding machine.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine Nwjdpfxjzhv Rlo Ai Ton -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Hello, selling a Nedpfx Aisvl Imko Tewn GAF Duplex candle filter unit. Completely made of stainless steel, 1.4404 Condition see photos, EXW Marthalen

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Njdsz Trrhepfx Ai Tswn Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Condition: excellent (used), functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, VITO XS Vacuum Filtration System The ideal frying oil management solution for commercial kitchens and bakeries The VITO XS frying oil filter is the perfect solution for businesses with larger fryers. With its 40-liter tank and unique vacuum filtration system, it enables efficient and hygienic handling of frying oil in your kitchen. All benefits at a glance: Save up to 50% on frying oil Ensure optimal oil quality Reduce labor Ensure maximum safety in the workplace A sustainable solution Digital monitoring via VITOconnect Easy and hygienic transport in the kitchen The X-Series operates according to a simple principle with a focus on oil conservation and safety: The device creates a vacuum and draws the used frying oil through a hose into a closed tank. Since the hot oil is not drained, a safe working environment is created around the fryer. During this innovative oil removal process, the frying medium is passed through an environmentally friendly filter pad. This ensures very fine microfiltration without the use of chemicals or additives. By removing the finest food residue and carbon particles, oil savings of up to 50% are achieved. After emptying, the fryer can be thoroughly cleaned while the oil is stored in the VITO X filter system. After the filtration process, the frying medium is pumped back. The result? Clean oil for a delicious fried product and a satisfied, satisfied customer. Technical Specifications Normal Use: Ideal for restaurants and bakeries or high frying volumes Filter capacity: up to 30 l/min (66 lbs/min) Filtration efficiency: up to 5 µm / 200 µin Pump capacity: up to 35 l/min (77 lbs/min) Tank volume: 40 l / 73 lbs Particle capacity: 10.7 kg Weight: 45 kg / 99 lbs Nwedpfx Aijv Hz Svj Ten Temperature: max. 200°C / 392°F Material: 1.4301 stainless steel Electrical connection: 1N/PE / 220 - 240 volts / 50 Hz - 60 Hz External dimensions W x D x H: 553 mm x 551 mm x 679.50 mm Lance available optionally (not included) Financing through our bank is also possible. komplett-konzept.leasingo.de Other items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2019, condition: ready for operation (used), A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible. Njdpfxozhb Ezo Ai Tjwn

Condition: good (used), Manufacturer: Knoll Year of construction: 2008 Type: HL 250/1400 Equipment number: 368355 Nsdpfxjzqy Hvj Ai Town High-pressure pumps: 2 x………….. bar Tank capacity: 1,000 l Equipment: Knoll belt filter Note: The system was used on an index rotary machine. In this process, the coolant was pumped from the machine into the tank using a lift pump and then cleaned and pumped back to the machine using high-pressure pumps. The system has its own Siemens PLC with operator panel. Connection: 13.47 kW Weight: Dimensions: 1,500 x 1,800 x 2,400 mm

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Nwedpfxey Eg Dyj Ai Tjn

Condition: used, This listing is for the Akta crossflow filtration system The unit is in full working condition and is ready for immediate use Nodpfexhf A Rox Ai Tswn An ÄKTA Crossflow filtration system is a type of tangential flow filtration (TFF) system developed by Cytiva (formerly GE Healthcare). It's used primarily in bioprocessing and biotechnology applications to concentrate, diafilter, or clarify biological samples such as proteins, viruses, plasmids, and other biomolecule Core Functions: Concentration – Reducing the volume of a sample while retaining the target biomolecule. Diafiltration (Buffer Exchange) – Removing salts or changing the buffer environment by continuously adding a new buffer while removing permeate. Clarification – Removing particulates or cells from process fluids Key Components: Pump Modules: Typically peristaltic pumps that manage flow rates precisely. Filtration Cassettes: Hollow fiber or flat sheet membranes for ultrafiltration or microfiltration. Pressure Sensors: To monitor and control transmembrane pressure (TMP). Conductivity/pH/UV Detectors: For in-line monitoring of the filtrate and retentate. Benefits: Automation reduces operator error and variability. Scalable design for seamless transition from lab to production. Precise control of filtration parameters (flow rate, pressure, volume). CIP (Clean-In-Place) capabilities for easy maintenance and compliance with GMP. Common Applications: Protein concentration and buffer exchange Viral vector purification Plasmid DNA purification Cell harvest and clarification

Year of construction: 2019, condition: ready for operation (used), A dynamic Novoflow crossflow filtration system with integrated CIP system from the food industry is available. Filter area: 2m², Filter discs: 16, Filter disc material: ceramic, Filter disc diameter: 312mm, Pore size: 0.2µm, Max. operating pressure: 4bar, Max. operating temperature: 60°C, Speed: 450rpm, Process volume: approx. 60l. Machine dimensions X/Y/Z: approx. 1500mm/600mm/1500mm, Weight: approx. 250kg. Documentation available. An on-site inspection is possible. Nwjdpfszqfwgjx Ai Ton