Used Donau Quick Radial Drill for sale (10,091)

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Gusdpfxemt Ed Ro Ahzod Coolant system Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Completely overhauled 2025 12 months warranty New paint RAL 7035/7031

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine Guodpfx Ahoy Uv Tvozed - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Guodpfx Ahozlyvtjzjd Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Godpfswnn S Rox Ahzjud Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: excellent (used), Year of construction: 1972, machine/vehicle number: 42 473,

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Gedpfeu Nm Niox Ahzoud Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gedpfszi S Snex Ahzsud

Condition: used, y-axis 1.000 mm table dimensions 1.000 x 600 mm bore depth 150 mm bore diameter 32 mm spindle tunring speed 30 - 2.650 U/min output 6 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Gedpjy A Tc Defx Ahzeud if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 throat 1000 mm Guodpfxjzkbqvs Ahzed documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm Gujdjt H Smyspfx Ahzod arm length 1000 mm workpiece height max. 1400 mm total power requirement 6 kW weight of the machine ca. 3.700 kg dimensions of the machine ca. m

Condition: ready for operation (used), Year of construction: 2012, WAGNER PRC 40 – Outrigger drilling machine / Radial drilling machine - Year of manufacture: 2012 - CE marking - COMPLETE TECHNICAL DATA – SEE PHOTO - Automatic feed - Morse taper MK 4 Guedpfx Ahjzi Av Dszjd - Speed range: 25-2000 RPM - Coolant system - Rotary table - Documentation Dimensions: L x W x H 2.5 x 1.1 x 2.65 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: used, Year of construction: 1976, machine/vehicle number: 2791, functionality: fully functional, throat depth: 1,300 mm, drilling capacity: 50 mm, We are selling our radial drilling machine, which is still in use and in working order. Weight approximately 2.5 tons. Gujdpfxowku H To Ahzod Will be gladly loaded to the buyer; shipping/transportation costs are borne by the buyer.

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Gsdpfxsv If T Te Ahzoud Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Gusdpfx Aozinz Sshzod Overall height: 505 mm T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, overall weight: 7,650 kg, total height: 3,500 mm, total length: 3,410 mm, total width: 1,270 mm, If you are interested, I am happy to send the technical datasheet. - Radial drilling machine HCP GRV 554 - Year of manufacture: 1985 - Price is ex works, loaded in 27729 Hambergen - The machine can be inspected; please schedule an appointment - The machine is sold without warranty or guarantee. However, it has always operated reliably until disconnection - A box table is also included, dimensions: 1200 x 750 x 500 mm Guodpfxex A Dpfj Ahzed - Machine weight: 7,650 kg - Machine dimensions: 3,410 x 1,270 x 3,500 mm - We are happy to assist with transport/installation; costs are quoted in advance at a fixed price!

Condition: good (used), Year of construction: 1968, machine/vehicle number: 68113, Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity, enlarging holes approx. 80 mm - Thread cutting up to approx. M 40 - Drill spindle mount MK 5 - Drill spindle stroke 380 mm - Overhang min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the arm approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Work area on base plate approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm Gjdpfjzii Sfjx Ahzoud - 9 feed rates 0.09 - 0.75 m/rev - Drill spindle drive 400 V / 10 kW - E - central clamping system - Coolant system - Space required approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg

Condition: used, bore capacity in steel (diameter) 50 mm arm length 1100 mm bore capacity in cast iron 60 mm Gjdpfx Ajzhn U Aohzeud quill stroke 300 mm tool taper MK 5 speeds 22 - 1000 U/min feeds ja mm/U Boring motor 4,5 kw total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2,1 x 0,9 x 2,85 m Radial drilling machine - Box table 750 x 750 x 500 mm - Coolant system - Emergency stop device

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine Gedeirax Uepfx Ahzsud -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Year of construction: 1963, condition: used, Radial drilling machine, drilling machine, boom drilling machine, universal drilling machine, milling machine -Projection: 645 mm Gjdjdvnbxjpfx Ahzeud -Taper mount: MK3 -Speeds: 95 - 1050 rpm -Columns: Ø 190 mm -Spindle stroke: 195 mm -automatic feed: 0.05/0.10/0.20 mm/rev -Clamping table: 735 x 520 mm -Dimensions: 1350/705/H2170 mm -Weight: 1100 kg

Condition: used, functionality: fully functional, spindle mount: MK 5, drilling depth: 315 mm, height adjustment type: hydraulic, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 500 mm, table length: 630 mm, overall weight: 3,500 kg, arm reach: 1,600 mm, For sale: ZJ Z3050×16/1 radial drilling machine. Robust radial drilling machine for drilling, reaming, countersinking, and tapping larger and heavier workpieces. Thanks to the long radial arm, the drill head can be positioned flexibly above the workpiece without the component needing to be constantly moved or re-clamped. This machine is equipped with hydraulic clamping for the arm, column, and drill head. The combination of the heavy-duty construction, the wide working range, and the mechanical 16-speed and feed control makes it suitable for maintenance work, structural work, machine construction, and general metalworking. The machine is being sold due to a restructuring of the production facility. It is offered in used condition, as shown in the photos. Guodpfx Ahezhbtrezod Inspection and, if desired, a functional test are possible by appointment in Kuurne, Belgium. The vice, clamping devices, and other accessories visible in the photos are only included if this is expressly agreed upon.

Condition: excellent (used), Radial drilling machine P50 Gjdpfxsziazde Ahzjud

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, Arm length 1800 mm, drilling capacity 80 mm, weight 7000 kg Gsdpfxoyzq Dpj Ahzjud

Condition: excellent (used), functionality: fully functional, RADIAL DRILLING MACHINE BREDA Guodpoziluvjfx Ahzed 1250 X 55 MODEL R55 TYPE: 125 USED MACHINE INTERNAL CODE: SVR 319

Condition: ready for operation (used), functionality: fully functional, RADIAL DRILLING MACHINE DORMAC 1250 X 50 Gusdpfxeziciqs Ahzod RAPID 50 MODEL USED MACHINE INTERNAL CODE: SVR 219

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Godpop Atipefx Ahzjud Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE