Used Doosan Mynx 5400/50 for sale (33,793)

Condition: good (used), Year of construction: 2017, operating hours: 5,270 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, table load: 1,000 kg, Equipment: chip conveyor, Technical specifications MYNX 5400/50 CNC controller: Fanuc I series Axes: X-axis travel (mm): 1020 Y-axis travel (mm): 550 Z-axis travel (mm): 530 Work table: Table dimensions (mm): 1200 x 540 Maximum workpiece weight (kg): 1000 Spindle: Spindle speed (rpm): 6000 Spindle drive power (kW): 30 Spindle torque (Nm): 617 Equipment: Gujdsytchpepfx Alxob Through-spindle coolant 20 bar Emulsion oil skimmer Pre-installed for 4th axis Axis and spindle load monitoring (tool load monitoring) 10.4" monitor Tool holder type: BT50 Number of tool magazine positions: 24 Chip conveyor Machine dimensions: Width (mm): 3350 Height (mm): 2920 Length (mm): 2467 Weight (kg): 7500

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Gsdpfxexv Udgs Alxjub Spindle speed 8000 rpm, Spindle taper BT50, Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, through spindle coolant, swarf conveyor, Low Volt light.

Condition: used, Year of construction: 2009, Doosan Mynx 750/50 4 Axis Vertical Machining Centre with Fanuc Series 21i-MB CNC Control, Kitagawa MR320RAE04 4th Axis Unit 310mm 3 Jaw Chuck, Table Size 1600mm x 750mm, 40 Tool ATC, BT50 Spindle Taper, Filtermist FX7002 Oil Mist Extractor, Kaukan Chiller Unit, Profluid MCF 20 Coolant Pressure Filter Unit, Machine Weight 13500kg. S/No. MYNX 7500373 (2009) Includes Work Bench, Vice and Various BT50 Spindle Tool Holders. Country of Origin: Korea Godpfxey Ic Duj Alxeub Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, Gsdpfx Ajxwytcjlxjub through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: excellent (used), FANUC 21-M Control With NC dividing head Working travels 1020 x 510 x 575 mm Table size 1200 x 550 mm Spindle taper SK40 Spindle speeds 60-8'000 rpm Tool changer 24 Pos. Guodpey Hqyhefx Alxob Coolant through spindle Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2014, DOOSAN - MYNX 7500 - 2014 - system DOOSAN FANUC i series - in tool production only (not in mass production) - spindle running hours 27600 - spindle through cooling - spindle changes (including reserve spindle) - X/Y/Z=1630/762/650 mm - spindle taper BT 40 Big Plus - spindle 12000 RPM - spindle motor 18.5/15 KW (117 Nm) Gjdpoyrrimofx Alxjub - ATC 30 - table 1630x760 mm - table load 1500 kg - weight 14000 kg

Condition: like new (used), Year of construction: 2021, Technical data XYZ travel: 1270/670/625 mm Table: 1400 x 670 mm Spindle speed: 12,000 rpm Tool magazine: 30 positions Spindle: ISO 40 Control: Fanuc Through-spindle coolant (IKZ): 20 bar Chip conveyor Guedpfx Aleyinpgjxsb

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm Gjdpfx Ast H Nbuslxsub X Travel : 1500 mm Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 20,000 m/min, controller manufacturer: FANUC, controller model: Series 21i-MB, table load: 1,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15 W, BRAND: DAEWOO MODEL: MYNX 650 CATEGORY: VERTICAL MACHINING CENTRES YEAR OF MANUFACTURE: 08/2004 CNC CONTROL: FANUC SERIES 21i-MB MACHINE WEIGHT: 6,500 kg MACHINE DIMENSIONS: Length: 4,110 mm / Width: 3,190 mm / Height: 3,100 mm Spindle: Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (cont./30 min): 11/15 kW Working Capacity: X-axis: 1,300 mm Y-axis: 650 mm Z-axis: 625 mm Distance spindle centre–table top: 75 / 775 mm Distance spindle nose–table centre: 150 / 775 mm Table: Table size: 1,400 x 650 mm Table load capacity: 1,000 kg Feed Rates: Rapid traverse X / Y axes: 24,000 mm/min Rapid traverse Z axis: 20,000 mm/min Cutting feedrate X/Y/Z axes (linear interpolation): max. 8,000 mm/min Tool Changer: Tool taper: DIN 69871-A40 Gedpfx Aloxxlifoxeub Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Max. adjacent tool diameter: Ø 90 mm Max. alternate tool diameter: Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Other: Manuals, electrical diagrams, and CE Declaration Chip conveyor, coolant tank (300 L) Automatic high-pressure cooling system through the spindle line at 20 bar Transformer MACHINE OVERHAULS PERFORMED: - New Y-axis ball screw, including bearing replacement - X-axis ball screw overhauled, including bearing replacement - Complete overhaul of anti-friction material (Turcite B) on X and Y axes - Complete spindle line overhaul with belt, seal, and bearing replacement - Complete replacement of X and Y axis lubrication system - Complete internal repainting and Lexan replacement - Full overhaul of telescopic covers on X/Y/Z axes

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit Gusdpoyugvaefx Alxsb - Manuals The machine is no more in production but still under power and will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Controller DOOSAN FANUC i Series Guodpfxouu Rf Dj Alxsb Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories - Chip conveyor - Coolant unit - RENISHAW TS27 tool presetter - RENISHAW OMP60 zero point setting system - Manuals The machine is still in production but will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,048 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 530 mm, controller manufacturer: HEIDENHAIN, controller model: TNC620, total height: 3,000 mm, total width: 2,600 mm, table width: 540 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,600 W, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DOOSAN VM 5400 was manufactured in 2019. It features an impressive X-axis travel of 1020 mm, Y-axis travel of 540 mm, and Z-axis travel of 530 mm. The machine includes a robust table size of 1200 x 540 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VM 5400 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: DIN 69871 • Max. spindle torque: 165.5 N·m • Spindle cooling: VM-series standard • Tool magazine: Side-mounted ATC, cam-type • Machine hours: • Control on time: 13,616 h • Machine on time: 12,530 h • Program run time: 6,963 h • Axis motion time: 5,900 h • Spindle S1 time: 6,048 h Additional equipment Gsdoy Rrtwspfx Alxoub • Workpiece probe installed • Tool length measurement probe installed Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2008, operating hours: 8,500 h, functionality: fully functional, Vertical machining center DOOSAN MYNX 540, year 2008, installed in 2014. Working hours: 8,500, power-on hours: 25,000 – fully functional, in excellent mechanical and electrical condition. Fanuc 21iMB CNC control Spindle 15/18 kW belt-driven, DIN 40 (DIN 69671 A40) Boxways – 30 tools – table size 1200mm x 540mm, maximum table load 800kg Spindle nose to table distance 150–775mm Travel: X 1020mm, Y 510mm, Z 625mm Gjdjy Azgqopfx Alxjub Chip conveyor with tank M8 pump and high-pressure through-spindle coolant pump Mist extractor – internal light – three-color signal light 10 DIN tool holders included Maximum tool weight 8kg Automatic lubrication – transformer Weight 7,000kg – machine in operation and available for inspection CE certified – manuals and certification included.

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 Gusdpfsxxlmwox Alxob CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 880 mm, total length: 2,460 mm, total width: 735 mm, Tested forklift battery for your forklift - 80V 6PZS 930Ah - special tray + 1 year warranty + Including aquamatic system + Including end discharge device & REMA 320 connector (other connectors available on request) + Capacity: minimum 90–100% (C5 capacity protocol will be supplied upon delivery) + Year of delivery: 2024 Dimensions: Length: 2,460 mm Width: 735 mm Height: 880 mm Weight: approx. 2,300 kg Suitable for the following models and others: Still MX-X Crown TSP 7000 Bulmor EQN 40-50 Caterpillar EP50N Daewoo B40 X Dimos BMS 30/89 Doosan B45X-5 Doosan B50X-5 Hubtex MQ 45 Hubtex MQ 70 Hubtex MSU 40 Hyundai 50B-9 Hyundai B40-9 Steinbock-Boss WA 15 Godpfxsy Rnpus Alxoub Kalmar EC 4-500 Kalmar ECD 50-6 Kalmar ECD 55-6 Kalmar ECE 50-6 Kalmar ECF 70-6 Kalmar ECG 55-6 Common battery sizes available; please enquire. Transport possible.

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Gedpfxjvzln Rs Alxeub engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 670 mm, feed length Z-axis: 625 mm, nominal power (apparent): 37 kVA, controller manufacturer: Fanuc, controller model: i Series, workpiece weight (max.): 1,000 kg, total height: 2,815 mm, total length: 3,350 mm, total width: 3,760 mm, table width: 650 mm, table length: 1,300 mm, table load: 1,000 kg, overall weight: 8,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Doosan DNM 650 Vertical Machining Centre – 2011 Fanuc i-Series Control | 12,000 RPM | 4th Axis Ready 2011 Doosan DNM 650 Vertical Machining Centre with Fanuc i-Series control. 12,000 RPM BT40 spindle, rebuilt spindle, 4th axis ready, 30-tool ATC, TSC, chiller & swarf conveyor. Available from Used Machine Tools Ireland. Manufacturer: Doosan Model: DNM 650 Machine Type: 3 Axis Vertical Machining Centre with 4th Axis preparation Year: 2011 Control: Fanuc i Series Condition: Very Good - spindle rebuilt in 2026 Availability: March 2026 We are pleased to offer this 2011 Doosan DNM 650 Vertical Machining Centre, a highly regarded and extremely rigid VMC, ideal for precision subcontract machining, toolmaking, and production environments. This machine is equipped with a Fanuc i-Series control and benefits from a newly rebuilt spindle, ensuring excellent performance, reliability, and long service life. The machine is prepared for a 4th axis with Nikken interface, making it an ideal platform for future rotary or multi-axis work. Key Specifications Manufacturer: Doosan Model: DNM 650 Year: 2011 Control: Fanuc i-Series Spindle Speed: 12,000 RPM Tool Taper: BT 40 X / Y / Z Travels: 1270 / 670 / 625 mm Table Size: 1300 × 650 mm Maximum Table Load: 1000 kg Rapid Traverse Rates: X / Y: 36 m/min Z: 30 m/min ATC: 30 Places Max Tool Diameter: Ø80 mm with adjacent tools / Ø125 mm without Max Tool Length: 300mm Max Tool Weight: 8 kg Machine Dimensions (Approx): 2760 x 3350 x 2815mm Machine Weight (Approx): 8500kg Features & Equipment Newly rebuilt spindle Nikken 4th Axis preparation 30-station Automatic Tool Changer (ATC) 20 bar through-spindle coolant (TSC) Coolant chiller LNS swarf conveyor Data server / networking capability Fully enclosed, heavy-duty construction Please Note No tool holders, vices, or swarf bin included Ideal For Precision engineering CNC subcontract machining Automotive & aerospace components General and high-speed milling applications The Doosan DNM 650 is known for its exceptional rigidity, accuracy, and reliability, making it one of the most popular vertical machining centres in its class. Gjdpfeyfh Ixox Alxeub Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2004, Doosan Mecatec S550LM Slant Bed CNC Lathe with Fanuc Series 21i – TB CNC Control, Swing Over Bed 710, Distance between both Centres 1230mm, Max Turning Diameter 480mm, Max Turning Length 1130mm, Spindle Speeds 30 – 2500rpm, 12 Tools VDI40 Turret, X Axis Travel 300mm, Z Axis Travel 1150mm, Live Driven Tools, C Axis, Machine Weight 8000kg. S/No. LNY – 1008 (2004). Country of Origin: Korea Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Guodpfx Aloy Idbzsxsb

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment Gsdex D H Aqopfx Alxoub • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm • Tool holder: 55 mm • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mmMaximum opening 170 mmMeasuring arm for tool measurement

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 2,500 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 1,130 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: 21i-T, number of axes: 2, Horizontal turning machine manufactured in 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It includes a programmable tailstock and a 12” 3-jaw chuck, enhancing operational efficiency and precision. If you are looking to get high-quality turning capabilities, consider the DOOSAN S 550 L machine we have for sale. Contact us for further details. • Condition: Fully functional, ready for demonstration; machine still under power; enhanced operational efficiency and precision • Capacities: max workpiece diameter 550 mm; swing over bed 710 mm; distance between centers 1230 mm; spindle center height 1067 mm; bed width across saddle slideway 280 mm • Spindle: nose ASA A2-8; spindle hole taper MT No. 7; spindle bore Ø102 mm; front bearing Ø150 mm; bearings: roller/angular + thrust; speed override 50–150; motor AC 18.5/22 kW (continuous/30 min) • Turret/tooling: V12 turret; standard tool shank 25 mm; max boring bar Ø50 mm • Axes: rapid traverse rate X: 20, Z: 24 (units as provided) • Control/electrics: NC unit F-21iTB; total power consumption 31 kVA • Pumps: hydraulic pump motor AC 1.5 – 4P kW; way lubricating pump motor AC 0.02 – 4P kW; coolant pump motor AC 0.4 – 2P • Other features: steady-rest and tailstock move when hooked to the carriage Additional equipment • Programmable tailstock • 12" 3-jaw chuck • Self-centring steady rest SLU 3.1 • Automatic tool measuring arm Gujdpfxey Hrgcj Alxeb Technical Specification Counter Spindle No Driven Tools No

Condition: used, power: 127 kW (172.67 HP), color: orange, lifting height: 2,800 mm, Year of construction: 2017, operating hours: 7,260 h, Year of manufacture: 2017 Number of cylinders: 6 Empty weight: 15.000 kg Carrying capacity: 10.885 kg GVW: 25.885 kg Gjdpfoxxkf Sox Alxjub Dimensions (LxBxH): 758 x 274 x 328 cm Engine type: Doosan Doosan DL06 Stage IV

Condition: used, color: orange, Year of construction: 2021, operating hours: 4,170 h, Equipment: air conditioning, Year of manufacture: 2021 Empty weight: 36.000 kg Dimensions (LxBxH): 1141 x 300 x 364 cm Gedpfx Asvpqlkolxoub Track width: 60 cm Digging depth: 6.94 m = Additional options and accessories = - Central lubrication

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 6,780 h, Year of manufacture: 2015 Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Guedpfex Hgqijx Alxeb Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning * Radio * Central lubrication system Godpsy Daf Ijfx Alxsub * Work lights * Loading bucket * Load disconnect ----Subject to errors and prior sale ----Vehicle number: 11891

Condition: excellent (used), Year of construction: 2016, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Heidenhain Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor Gsdpfjyylzasx Alxjub