Used Double-Sided Miter Fence for sale (25,395)

Year of construction: 2022, condition: new, angle: 0° - 90° max cutting length: 1370 mm Ijdpfx Aji Ezr Njpceia

Year of construction: 2020, condition: new, Double-sided mitre stop Year of manufacture: 2020 For fast and stepless production of mitre cuts on narrow and short workpieces at any angle from 0° to 90° For crosscuts up to 1375 mm Easy handling and quick installation on the saw's roller carriage Suitable for Panhans models 680_10_20 Conversion kit for other models available on request Availability: short-term Isdpfx Apokwhalocjia Location: Hochheim

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm no. of strokes 60-300 Hub/min table surface area 730x750 mm Iijdpfowz Rv Ejx Apcea weight of the machine ca. 14 t

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Iisdpfxjx U A D Uj Apcoa Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Iijdpfey Dpmujx Apcsa Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system Iisdpfxox Tppuj Apcja - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment Iedpfx Apox Thcmjcjia - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7130 TECHNICAL DATA - Maximum working width: 800mm - Maximum working thickness: 200mm Top section: - Pawls - Toothed feed roller - 3 rows of pressure rollers - Planing shaft 810mm, for 4 knives (2 blades fitted), approx. 7.5kW - Pressure - Smooth, metal feed roller Bottom section: - Adjustable infeed table with slip roller - Planing shaft 810mm, for 4 knives (2 blades fitted), 7.5kW - Smooth, metal slip roller - Electric table raising - Extraction nozzle diameter: 120mm - Dimensions (L/W/H): 1900x1450x1350mm - Weight approx. 2500kg – Czech manufacture Isdpfx Aeytdtaopcjia – Very good condition – Used planer Net price: 33,500 PLN Net price: 7,970 EUR depending on EUR 4.2 rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6946 Ijdpfxex Rq Nwj Apcoia TECHNICAL DATA - Max. working width: 210mm - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2005, Max. cutting length: 6,000 mm Minimum cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel range inside and outside: 22.5° - 90° - 140° Angle tilt between 45 and 90 degrees Digital angle displays Accompanying roller conveyor Iiodeyz Aa Aepfx Apcea Good condition

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 20303, cutting length (max.): 4,500 mm, saw blade diameter: 500 mm, pressure: 7 bar, Tilting range pneumatically from 90° to 45° Saw blade diameter 500 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Iisdpfx Ajy Ah Hkepcsa Power output 4 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 32 l with spraying Ideal machine for high-volume series production when cutting at 90° and 45° Vertical pneumatic material clamping unit Machine is prepared for operation We can offer professional assembly

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 Iodpoygm Aksfx Apcoia - 2100 / 3800 rpm - Saw blade Ø 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping system

Condition: used, machine/vehicle number: 006561, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Iisdpfx Apjyzplfecea Max Panel Width: 2800 mm Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, overall weight: 208 kg, total length: 400 mm, total width: 400 mm, total height: 470 mm, Erowa ER-051145 FL-AA0324 Double side tooling column with Erowa Mounting holes System Erowa Length 400 mm Width 400 mm Iijdpfsywy U Asx Apcea Height 470 mm Weight 208 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Iiodpsyyya Dsfx Apcoa Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Condition: used, Year of construction: 1990, pressure 160 t stroke 20 - 120 mm no. of strokes 30 - 180 /min distance between columns 1510 mm column travel -side 400 mm dayligth 820 mm table surface area 1430 x 900 mm hole in the table 1010 x 320 mm table height over floor 890 mm ram surface 1300 x 800 mm ram adjustment 100 mm material width 20 - 400 mm material thickness 0,3 - 5,0 mm feed length 1,0 - 9999,9 mm Iiodpfx Ajyx Ii Depcja power requirement 52,0 kW weight of the machine ca. 29,0 t dimensions of the machine ca. 3,7 x 2,5 x 4,0 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, back gears, pneumatic clutch/brake combination, hydraulic overload protection in ram, motoric ram adjustment, pneumatic counterbalance in ram, bolster plate, motoric centralized lubrication, electronic press force monitoring electronic roll feed Type KWV 400 ZDH 120 (YOM 2003), band-material oiler

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Iiedpfxeyypi Uo Apcja SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) SERVO-DRIVE guillotine shear (cutting the edge/band) Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: used, Year of construction: 1977, pressure 125 t distance between columns 1150 mm stroke fix 25 mm no. of strokes 70 - 700 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm table surface area 1150 x 1000 mm hole in the table 900 x 220 mm table height over floor 1500 mm ram surface 990 x 850 mm ram adjustment 60 mm power requirement 46,5 kW Iiedpfjylzw Hox Apcea Weight 29,5 t dimensions of the machine (WxDxH) 3,3 x 1,8 x 4,7 m SPECIAL DEAL as is where is, partly dismantled, as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1995, pressure 100 t stroke 20 - 120 mm no. of strokes 40 - 240 /min distance between columns 1300 mm dayligth (stroke and adjustment up) 670 mm column travel -side 400 mm table surface area 1200 x 800 mm hole in the table 900 x 200 mm table height over floor 1150 mm ram surface 1130 x 650 mm ram adjustment 80 mm material width 250 mm material thickness 0,3 - 3,0 mm material cross-cut 750 mm² feed length 1 - 9999,9 mm power requirement 22,0 kW Weight 16,0 t Ijdpfewc U Nlsx Apcoia dimensions (WxDxH) 3,7 x 2,5 x 3,7 m height over floor 3,7 m permitted for automatic mode according to the CE-Norm with infinitely variable PIV-drive, pneumatic clutch/brake combination (make Ortlinghaus), electronic press force monitoring (two channel), automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motorised circular oil lubrication electronic roll feed (make Kaiser, type KWV 250)

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available Iodpfx Aovuugcopcjia

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) Ijdpfx Asvuubajpceia with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, functionality: fully functional, Year of construction: 2015, - Made in Poland - Year of manufacture: 2015 - DTR, CE - Electric saw blade spacing adjustment TECHNICAL SPECIFICATIONS: - Cutting height: 60 mm - Saw blade diameter: 250 - 350 mm - Number of saw blades: 2 pcs - Max. cutting width: 700 mm - Min. cutting width: 90 mm - Max. blade spacing: 460 mm - Feed speed adjustable via inverter - Feed speed range: 0 - 40 m/min - Main motor power: 2 x 4.7 kW - Feed motor power: 0.75 kW - Blade spacing motor power: 0.12 kW - Total power requirement: 11.5 kW - Roller table length: 2 x 240 cm - Roller table width: 460 mm - Extraction port diameter: 160 mm - Transport dimensions (L/W/H): 200 / 200 / 140 cm Iodpsw H Rdaefx Apceia - Weight ~ 1000 kg

Condition: excellent (used), Knopp Duplex glass drilling machine double-sided. Year of manufacture 2000 In good condition. With ball roller table, cross laser and infinitely variable speed control. Iodpfoq Umcnox Apcjia Incl water cooling

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. 6.000 mm Iijdehvrz Tepfx Apcoa

Condition: used, machine/vehicle number: 008430, Position 1: Panel Feeding and Loading MAHROS + STEFANI-RUNNER + EVOLUTION Position 2: Double Sided Squaring/Edgebanding Machines MAHROS + STEFANI-RUNNER + EVOLUTION Position 3: Panel Stacking and Offloading MAHROS + STEFANI-RUNNER + EVOLUTION Iiodpfsyqxx Sex Apcea