Used Dreher Brewery for sale (133)

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading Fpsdpfxjz Enbbs Afujn :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, Line is consisting of: Dreher 2 vessel brew system Type: KBA500 Year: 2006 Kettle: 550 litres Heating: 42 kW Controls KBA basic 3x Dreher fermenting tanks Type: GW500 Year: 2006 Content: 520 litres With Dreher ZKV120 cooling 3x Dreher / Brovarni dispensing tanks Type: 500 L CCT Year: 2017 Fpjdpfx Aez Hlclofuen Content: 500 litres 1x Dreher brite tank Content: 1000 litre 6x Dreher Kombi-tank Type: KT500 Year: 2006 Content: 500 litres 5x FIB beertanks Type: 70200503 Year: 2022 Content: 540 litres Auxiliary equipment a.o. - Gail 103 grain mill - Enotecnica Pillan srl F30 20x20 filter - Serrco SW-150 cooling water tank - bottle washing station - bottle filling machine - corking device - 45x 20 litre kegs - working table - double sink

Condition: used, machine/vehicle number: G11762, Rotor diameter: 200mm Rotor width: 100mm Rotor blades: 32 rows Fpjdpfxoz N Ix Ne Afuen Stator blades: 1 row Inlet cross-section: approx. 90 x 10mm Drive motor: 4.0 kW Mechanical feed device for extruder strands

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Fjdpfxsz N Iyas Afuspn Rotor width: 200 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 300 x 200 mm Drive motor: 2.2 kW

Condition: used, machine/vehicle number: K12805, Rotor diameter: 260 mm Rotor width: 410 mm Rotor blades: 5 rows Stator blades: 2 rows Fpsdpjz N Iymsfx Afuon Infeed cross-section: approx. 2 pieces, 10 x 120 mm Drive motor: 11 kW Mechanical infeed device for film edge strips

Condition: used, machine/vehicle number: K12804, Rotor diameter: 260 mm Rotor width: 410 mm Fedpoz N Iygjfx Afuspn Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 260 x 410 mm Drive motor: 11 kW Wear-resistant design of the grinding unit.

Condition: used, machine/vehicle number: K12936, Rotor diameter: 340mm Rotor width: 520mm Rotor blades: 5 rows Stator blades: 2 rows Inlet cross-section: approx. 340 x 520mm Fpsdpsz N Iyyefx Afuen Drive motor: 22kW

Condition: used, machine/vehicle number: K12895, Rotor diameter: 260mm Fedpfsz N Iytjx Afuspn Rotor width: 410mm Rotor blades: 5 rows Stator blades: 2 rows Infeed cross-section: approx. 2 pieces of 140 x 40mm Drive motor: 7.5kW Vacuum system for drawing in film edge strips

Condition: excellent (used), functionality: fully functional, Manufacturer: Dreher, Germany Model: 26/26 GFS Fpjdsztfl Nepfx Afuon Dimensions of the grinding chamber: 260 x 260 mm Power: 5.5 kW New blades 3 rotor blades 2 stator blades Additional sieve

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm Fsdjwh Naispfx Afuspn - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Fpjdpozv T I Dofx Afuen

Condition: used, Year of construction: 2011, Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Fjdpfjuqfa Isx Afuopn Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: used, Year of construction: 1987, Uncoiler manufactured by DREHER, type 2380 F-FPS. Press force approximately --- tons. Year of manufacture 1994. Summary provided – a full technical translation will follow if required for this lot. Fpedpfx Aszynmvjfujn

Condition: used, Mühle Dreher and Mühle Wanner. Fodpfxezclrvj Afuspn

Condition: good (used), functionality: fully functional, Mill with extraction system, sound-attenuating enclosure Power: 4 kW Fsdpjvzzx Ejfx Afuepn All functions tested and fully operational!

Condition: excellent (used), Professional granulator from the German brand Dreher – model S 26/26 GFS-SPEZIAL. This unit is designed for shredding plastics from injection molding or extrusion processes. Robust construction, proven VEM 7.5 kW motor, three-phase 400 V power supply. The machine features a large feed hopper, convenient service access, and an electrical control cabinet with emergency stop button. The installed low-speed three-phase motor ensures high shredding power with stable operation. Fpodpfxsvyumyj Afuen • Motor power: 7.5 kW • Power supply: 400 V 50 Hz • Speed: 1500 rpm • Throughput suitable for medium and large injection moulding machines • German manufacturing quality • Sturdy frame and knife assembly Very good condition, mechanically inspected, ready for operation.

Condition: excellent (used), DREHER MILL S26 / 41 VS with cyclone and fan Power: 11 KW Rotor diameter: 260 mm Rotor width: 410 mm 4 rotor knives, 2 rows of stator knives Inlet cross section approx. 260 x 410 mm Brqvu3zxfl Fpsdpegphqcofx Afuon Cutting mill with integrated noise protection. For plastic processing pipes, profiles, injection molding

Condition: used, Colour: Grey Price: On request Shredder Dreher S26 Type: S26/26 No.: K4727 Hopper opening: 250 mm x 400 mm Motor: 4kW 380Volt 8.3Ampere - Documentation available: No - CE certificate present: No - Serial number: K4727 - Main motor power [kW]: 4 - Number of shafts [pcs.]: 1 - Opening width [mm]: 250 - Opening length [mm]: 400 Financial information VAT: The price shown is exclusive of VAT Fpodpfx Afoyfguqousn VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² Fjdpjzrpu Sjfx Afuepn no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Shredder Dreher S20/20 No.:K2740 Funnel opening: 310mm x 340mm Motor: 3kW 6.3 Amps 380 Voltage - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3 - Opening width [mm]: 310 - Opening length [mm]: 340 Financial information Fodpfx Afewh I Uxjujpn VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Rotor knives: 3 Fpodpfxjyr Tzks Afusn Stator knives: 2 Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 14038, Rotor diameter: 260 mm Rotor width: 260 mm Number of rotor blades: 3 Number of stator blades: 2 Inlet cross-section: approx. 350 x 550 mm Fsdeyr Tzdepfx Afuspn Drive motor: 7.5 kW

Condition: used, machine/vehicle number: 12768, Rotor diameter: 340 mm Rotor width: 520 mm 4-knife rotor Fedpoyr Tq Eofx Afuopn 2 rows of stator knives Infeed opening approx. 340 x 520 mm Drive motor: 18.5 kW

Condition: used, - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fsdpfx Aswh Nacefujpn Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, opening width: 650 mm, power: 36.77 kW (49.99 HP), broyeur à lames . 2 lames fixes / 5 lames mobiles Fodpfxoq R Sqlo Afuopn moteur 37kw largeur utile 700 - rotor plein grille 12 mm (possibilité de changer la maille) sortie par ventilation ou visse