Used Driveshaft for sale (12)

Condition: good (used), Drive shaft, cardan shaft, universal joint shaft, articulated arm -Manufacturer: KUKA, articulated arm from robot KR125/3 KR125L90/3 -Item No.: 00 -Shaft: Ø 42 mm -Number: 6x articulated arms available -Price: per piece -Dimensions: Ø 42 x 660 mm Bsdpfx Aokwg E Hjphjdf -Weight: 1.6 kg/pc.

Condition: good (used), Cardan shaft, drive shaft -Flange: Ø 120 mm -Toothed shaft: Ø 50 mm -min. length: 665 mm -Max. length: 780 mm Bdjdpfx Aeb A Nfrjphjf -Weight: 14 kg

Condition: new, DRIVESHAFT BALANCING MACHINE BVI-03-88 Balancing machine for professional repair of cardan shafts up to 200 kg. The hard-bearing machine is adapted for heavy cardan shafts of trucks and special machinery. The high sensitivity of the supports allows also high-quality balancing of cardan shafts of passenger cars. The machine is designed for balancing cardan shafts in the facilities of cardan repair workshops. The machine can be quickly reconfigured for balancing a large amount of single cardan shafts of various designs, as well as for the production of small batches of shafts. . . . TWO TIMES faster then your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . .. ... HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. Bsdpfxon E Skwo Aphsdf 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 5200mm, weight up to 200kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Hard-bearing type machine - safe balancing of shafts with large initial unbalance • Machine is operated by one worker • Sliding tailstock spindle - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 200 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 5200 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2500 rpm Parameters of the supply network 380V, 3 Ph, 50Hz Power consumption, minimum, 3 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 1100 kg

Condition: used, mileage: 751,000 km, power: 316 kW (429.64 HP), first registration: 02/2005, fuel type: diesel, empty load weight: 13,490 kg, maximum load weight: 12,510 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, loading space length: 4,000 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, parking heater, trailer coupling, MAN TGA 28.430 6X4-4 tractor unit / flatbed truck with crane First registration: .000 km Axle configuration: 6X4-4 1st and 2nd axles: all-wheel drive with driveshaft 3rd axle: steerable and liftable Long cab Manual transmission Air conditioning, auxiliary heater Bsdey S S Evspfx Aphedf 2 trailer couplings Front maneuvering coupling Rear axle: air suspension Tires 385/65 R22.5, tread approximately 60% Tires 315/80 R22.5, tread approximately 60% Wheelbase: 3900mm Flatbed: 4000mm Side boards: 500mm Weight variant: 28,000 kg Technically permissible gross vehicle weight: 66,000 kg Unladen weight: 13,490 kg Crane: MKG HLK 201a3 Year of manufacture: 2004 Radio remote control 3 hydraulic outriggers 2.80m / 6390 kg 4.38m / 4180 kg 6.33m / 2770 kg 8.28m / 2060 kg 10.23m / 1650 kg Hook height: approximately 14 meters German vehicle, first owner Export / net price: 28,900 Euros All information without guarantee, errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, mileage: 174,000 km, power: 180 kW (244.73 HP), fuel type: diesel, tire condition: 50 %, axle configuration: 4x4, fuel: diesel, color: white, gearing type: automatic, Year of construction: 2014, Equipment: ABS, Android Auto, Apple CarPlay, air conditioning, airbag, car registration, cruise control, electronic stability program (ESP), navigation system, non-smoking vehicle, power assisted steering, Volkswagen Transporter T5 Edition 2.0 BiTDI 180 hp DSG 4Motion – 2014 I am selling my 2014 Volkswagen Transporter T5 Edition, with automatic DSG transmission and 4Motion all-wheel drive. Bdedpezqgv Dofx Aphjf Features: Year: 2014 Mileage: 174,000 km Reconditioned engine installed at 168,000 km (approximately 5,000 km ago) Automatic DSG transmission 4Motion all-wheel drive Edition trim level Recent work carried out: Reconditioned engine New crankshaft New connecting rods New cylinder head New valves and tappets Reconditioned turbocharger Reconditioned injectors New EGR valve New DPF (diesel particulate filter) New intercooler New front driveshaft DSG transmission oil change (performed by a professional) Differential oil change The mechanical work was carefully carried out by myself, with the exception of the DSG transmission oil change. Invoices for parts and the transmission oil change are available. Equipment: Air conditioning Android car radio with Apple CarPlay Cruise control Electric mirrors Tow hitch 4 Michelin Alpin tires in very good condition Utility vehicle conversion with wood paneling and plywood flooring The vehicle is in excellent mechanical condition, starts perfectly, and drives very well.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: hydrostat, fuel type: diesel, color: red, empty load weight: 2,300 kg, lifting height: 3,110 mm, tire size: 31x15,5-15, number of seats: 1, emission class: euro5, shovel volume: 0.4 m³, Year of construction: 2026, Equipment: 3rd hydraulic function, 4th hydraulic function, additional headlights, all wheel drive, cabin, cruise control, differential lock, gripper hydraulics, hydraulics, onboard computer, rear pickup, standard shovel, The HZM 810 Profi is a powerful compact loader designed for professional use in the construction industry, agriculture, and landscaping. Powered by a proven Kubota V1505 4-cylinder diesel engine with 25 hp / 18.2 kW, it offers powerful and fuel-efficient performance for continuous operation. As standard, the machine features a fully equipped cab with a suspended comfort seat, heating, ventilation, windshield wipers with a washer system, lockable doors, and a rear-view camera, all without any additional cost. The hand throttle maintains a constant engine speed regardless of the travel lever position, making it ideal for hydraulically powered attachments such as sweepers or mulchers. The Auto-drive function (cruise control) automatically regulates the driving speed, reducing driver fatigue on longer transport routes. The differential lock can be engaged by pressing a button on the joystick, providing maximum traction even on slippery surfaces. The hydraulic Euro quick coupler allows for tool-free attachment changes in seconds. The 3rd and 4th hydraulic circuits with continuous pressure function and pressure-free return allow for continuous operation of hydraulically powered attachments without any loss of performance. The machine is CE-certified in accordance with the EU Machinery Directive 2006/42/EC and is supplied with a COC document for straightforward road approval. To operate on public roads, a Class L driver's license (up to 25 km/h) is sufficient; no driver's license is required on private property. 2-year manufacturer's warranty with no restrictions. Technical data: Bdjdpfxszpf S Uo Aphof Hydraulic pump: Bondioli & Pavesi (Italy) Hydrostat: PWG (Italy) Feature Value Engine Kubota V1505, 4-cylinder diesel Engine power 18.2 kW / 25 hp at 2,300 rpm Max. torque 92.6 Nm Drive type Hydrostat with driveshaft, 2 travel ranges Maximum speed 20 km/h Fuel tank 40 l Hydraulic tank 50 l Max. hydraulic oil pressure 180 bar Max. hydraulic oil flow 42 l/min Operating weight 2,300 – 2,500 kg Tipping load at the attachment (machine level) up to 2,170 kg Standard bucket 0.4 m³ Dumping height 2,448 mm Turning radius inside / outside 1,588 mm / 3,067 mm Overall length / width / height 1,190 mm / 1,446 mm / 2,279 mm Wheelbase / track width 1,595 mm / 4,091 mm* *Manufacturer's specification – please check against the data sheet if required. Highlights: Full cab with heating, ventilation, rear-view camera; suspended comfort seat; adjustable steering wheel; LED main and cab lighting; rotating beacon; windshield wiper/washer system; radio; professional joystick with hydraulic pilot control; hand throttle; Auto-drive cruise control; brake-inch pedal; Euro quick coupler with pressure relief; 3rd/4th hydraulic circuit with continuous pressure function; electronically controlled drive (PWG); hydraulic auxiliary oil cooler; differential lock (joystick-activated). Scope of delivery: HZM 810 Profi incl. Euro attachment & 0.4 m³ standard bucket, German operating manual, COC documentation, 2-year mobile warranty with free choice of workshop, invoice with VAT stated. Options: Individual configuration (tires, rain protection roof instead of cab, rear weight 200 kg) available upon request.

Condition: new, mileage: 10 km, power: 110.32 kW (149.99 HP), fuel type: diesel, wheelbase: 3,400 mm, fuel: diesel, fuel tank capacity: 90 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 4, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, full service history, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, ISUZU M30H 150 hp Permissible total weight: 7500 kg Wheelbase: 3365 mm Standard equipment: • AGR - DPD - SCR • 7-inch multifunction display • Exhaust brake • Electrically adjustable and heated exterior mirrors • Immobilizer • Seat belt warning • Headlight wipers • Manual air conditioning • Electric parking brake • Driver's seat with suspension • Fog lights (front/rear) • DAB+ radio - Bluetooth • USB charging port • Central locking with remote control • Multifunction steering wheel • Driver and passenger airbags • Electric windows • Hill start assist (HSA) • Bi-LED headlights and taillights • Headlight beam adjustment • Automatic headlights • Warning lights for insufficient securing of the driver's cabin against lifting • Twice adjustable steering wheel • Speed limiter (90 km/h) • Start-stop system • Removable cup holder • Spare tire ENGINE ISUZU 4JZ1E6N diesel engine, 4 cylinders, 16 valves. Common-rail injection with DENSO i-Art direct injection. Turbocharging with electronically controlled VGS compressor, intercooler, variable exhaust valve control. DISPLACEMENT: 2999 cm³; POWER: 110 kW (150 hp) at 2800 rpm; MAXIMUM TORQUE: 375 Nm at 1280 – 2800 rpm. EXHAUST CONTROL - EURO VI OBD-E. Safety Package 2 ABS: Anti-lock braking system DWS: Front collision warning system AEBS: Active emergency brake assist ASR: Traction control system AEBS for pedestrians and cyclists: Automatic emergency braking system with pedestrian and cyclist detection EBD: Electronic brake force distribution FVSN: Following vehicle warning system Junction warning: Blind spot warning when turning EVSC: Electronic stability control DDAW: Driver attentiveness warning system AEBS: Automatic emergency braking system LDWS: Lane departure warning system RM: Rear view camera TSR: Traffic sign recognition MOIS: Motion detection system BSIS: Blind spot assist TPMS: Tire pressure monitoring system Tanks: 100 l, 14 l AdBlue® Transmission and gear ratios: Manual, 6-speed Capacity: 3 persons Axles: 2, including driven rear axle with twin tires Brakes: Front and rear: 310 x 42 mm, internally ventilated disc brakes with asbestos-free pads. Hydraulic system with brake booster and ABS according to EC standards, separate brake circuits on both axles. Drum parking brake on the driveshaft. Suspension: Front and rear: Parabolic springs with integrated rubber buffers, double-acting hydraulic telescopic shock absorbers. Stabilizer bar front and rear. Electrical system: Voltage 24 V – Alternator 90 A – 2 x 90 Ah battery (F-Space: 2 x 70 Ah) VEHICLE CONSTRUCTION DATA Hooklift system 90 cm City System Marrell Length: 3300 mm Load capacity: up to 4000 kg EQUIPMENT Container protection: Internal hydraulics Hydraulic distributor Hydraulic pump Oil tank Wide rollers ensure container stability Hook mechanism frame made of stainless steel Steel structure shot-blasted and painted with epoxy primer Side marker lights Work platforms Work light 1 unit Auxiliary headlights Frame of the rear lamp cover Bdedpsznlhyofx Aphsf With us, there are no hidden payments: - Delivery costs 0, - Documents 0, - First inspection 0,- Financing or leasing FURTHER INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: ONLINE SALES we speak German we speak English мы говорим по-русски mówimy po polsku

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 2,500 kg, lifting power: 1,700 kg/m, This advertisement is for informational purposes only and does not constitute a legally binding offer. FARMER 810 XL Compact. Powerful. Professional. In response to our customers' needs, we present the new FARMER 810 XL with a max. lifting capacity on attachment of 2000 kg, max. lifting capacity with pallet fork of 1900 kg. A perfect, maneuverable machine for both private customers and businesses! The machine is equipped with a powerful 4-cylinder KUBOTA engine, two driving ranges, and a differential lock. Thanks to its weight, it can be transported on a car trailer up to 3.5 tons – ideal for gardening and construction companies. ⸻ ⚠️ IMPORTANT NOTE REGARDING THE WARRANTY The WARRANTY applies exclusively to machines purchased DIRECTLY from us – not from other dealers. ⸻ FACEBOOK GROUP We cordially invite everyone to join our Facebook group “KINGWAY Machines.” There, we will provide information about new sales offers and help with any questions you may have about our machines. ⸻ ⚙️ TECHNICAL DATA Manufacturer: KINGWAY DEUTSCHLAND e. K. Model: FARMER 810 XL • Full cab with heating, ventilation • Road and work lights • Rear view camera • Radio • Suspended comfort seat • Heavy-duty axles • Incl. fork and bucket ⸻ ENGINE SPECIFICATIONS • Engine: KUBOTA V1505 Diesel • Cylinders: 4 • Emission class: Euro 5 • Power: 18.2 kW / 25 hp at 2,800 rpm • Max. torque: 92.6 Nm at 1,700 rpm • Cooling system: water-cooled • Noise level: 92 dB • Voltage: 12 V • Battery: 12 V / 60 Ah ⸻ ⚙️ DRIVE • Hydrostatic drive with driveshaft • Bondioli-Pavesi pump • 2 driving ranges + differential lock !!!! • Speed range 1: 0–8 km/h • Speed range 2: 8–20 km/h ⸻ CAPACITIES & PRESSURES • Fuel tank: 40 l • Hydraulic oil tank: 50 l • Hydraulic output: 46 l/min • Hydraulic pressure: 180 bar ⸻ ⚖️ WEIGHTS • Operating weight: 2,500 kg • Max. tipping load: 2,000 kg • Max. lifting capacity with pallet fork: 1900 kg • Max. lifting capacity on attachment: 2000 kg ⸻ DIMENSIONS Bjdjyk Edbspfx Aphedf • Steering angle: 42° • Turning radius inside/outside: 1,869 / 3,172 mm • Maximum lifting height: 2,210 mm • Dumping height: 1,650 mm • Dumping angle: 45° • Bucket volume: 0.5 m³ • Length: 3500 mm without bucket • Width: 1,490 mm • Height: 2,320 mm ⸻ TIRES • Standard: 31x15.5-15 agricultural profile ⸻ ⭐ SPECIAL FEATURES • Very high-quality & robust construction • EURO attachment (standard) • Lockable cab, tank & hood • Heating & ventilation • Rear view camera • Radio • Spacious comfort cab • Very maneuverable & compact • Hydraulic quick-change system • 3 and 4 hydraulic circuits • CE-certified according to the latest standards • Sale WITHOUT VAT possible (with VAT ID number) • FINANCING possible ⸻ SCOPE OF DELIVERY • Free delivery up to 200 km • FARMER 810 XL wheel loader • Bucket + pallet fork (4-in-1 bucket available on request) • Hydraulic quick-change system • Joystick control • 4x4 all-wheel drive • Road approval (COC) • Floating position • Operating permit • Differential lock ⸻ ACCESSORIES (OPTIONAL) • Tow hitch • Additional weights • Snow plow, sweeper • Crocodile jaws, grapple bucket • Volume buckets • Work platform ⸻ PRICE €23,100 net €27,489 gross

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge Bedpfx Ajzdpvgsphjdf The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: ready for operation (used), functionality: fully functional, power: 67 kW (91.09 HP), operation weight: 8,350 kg, Year of construction: 1995, operating hours: 7,800 h, machine/vehicle number: 7ZM001119, Equipment: UVV, cabin, quick-change device, PACKAGE CAT 914G (year of manufacture 1995, 7,800 hours) - Inspected according to UVV regulations, with quick coupler (without bucket) - Ready for operation CAT 914G parts machine (year of manufacture 1996) - Missing: windshield, driveshaft, steering column, master brake cylinder, tilting cylinder, right-hand door removed without glass CAT 914G spare parts: Bdjdpfx Apozcnx Sshjf - Driveshaft, filters, 500-hour maintenance kit, spare wheel, axle shaft seals, overhauled injection pump - Asking price (package): €20,000 - Location: 09484 Hammerunterwiesenthal

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time Bdjdpfxopbv Tfs Aphsf • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Bdjdpfopbwdlox Aphsf Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!