Used Dry Cleaner/ Friction Cleaner for sale (3,525)

Condition: used, Dry cleaner/ Friction cleaner with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness Djdpfx Asz Hxbzsdrjcn

Condition: refurbished (used), Dry cleaner/ Friction cleaner Dcsdpfsz Hxpxjx Adren with 110 kW drive power. Throughput max. 4t/h depending on type of plastic and material thickness

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). Dcedpfx Aoz Dz Rtedrsn • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Dsdjz Hxbuspfx Adrjcn

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Dedpfez Hxprox Adrjcn Drive power 30 kw A total of four dryers of this model are available.

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Dcodpfxerp E Nne Adron

Condition: ready for operation (used), functionality: fully functional, Whirlwind K 855 HP 7.5 / Industrial Dry Vacuum Cleaner Dodpfxszx Rtio Adrecn - CE marking - Like-new condition - Motor power: 5.5 kW - Filter area: 1.2 m2 - Container volume: 60 liters - Airflow: 135 liters/second - Vacuum: approx. 300 mbar - Suction hose - Connection cable Dimensions: L x W x H 1.2 x 0.6 x 1.4 meters / Weight: 125 kg Errors and omissions excepted.

Condition: used, Manufacturer: OspreyFrank Model: iSteam iS18 Type: Dry steam cleaner Dodpjzf U Auefx Adrscn Steam pressure: 8 bar Steam temperature: approx. 180 °C Power: 3500 W Voltage: 230 V Condition: used

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Feature Details Rotor Diameter 500 mm Rotor Length 3000 mm Rotor Speed 1000 rpm Drive Power 18.5 kW Screen Hole Size Standard: 2.5 mm; Max: 3 mm Housing Material Stainless Steel Dcodpfxewm I S Ie Adron Rotor Material Mild Steel Bearing Type Flange Bearing Throughput (HDPE) Up to 3.5 tonnes per hour Throughput (PET) Up to 3.5 tonnes per hour Throughput (LDPE) Up to 2 tonnes per hour • Inclined cylindrical trough design for efficient washing and transport • High-speed paddle rotor generates friction to clean contaminants • Replaceable screen with automatic rinsing/self-cleaning system • Water injection system for enhanced cleaning performance • Easy maintenance with accessible rotor and screen

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) Dcsdpfjhmi Ucox Adren very low operation hours

Condition: used, functionality: fully functional, Manufacturer: Ultrasonic Cleaner Model: JP-360ST Equipment type: Ultrasonic cleaner Ultrasonic frequency: 40 kHz Ultrasonic power: 1,800 W Ultrasonic generator supply voltage: 180–265 V Power supply: AC 380 V, 3-phase Tank capacity: 135 L Working tank dimensions: 50 × 60 × 45 cm Overall dimensions: 70 × 80 × 80 cm Drain valve: Ball valve, 1" Timer control: Automatic timer shut-off Functions Dodsz H Rlrspfx Adrocn Ultrasonic frequency: 40 kHz Ultrasonic power: 1,800 W Adjustable operating time Automatic shut-off at the end of the cycle 1" ball drain valve

Condition: good (used), Year of construction: 2011, functionality: fully functional, overall weight: 142 kg, total width: 760 mm, total length: 855 mm, total height: 1,985 mm, input voltage: 380 V, type of input current: three-phase, power: 3 kW (4.08 HP), noise level: 60 dB, volume flow: 320 m³/h, Equipment: type plate available, Ringler RI 331 D3-IS-M Atex Industrial Vacuum Cleaner, Chip Collector Power: 3.0 kW, 400 V Year of manufacture: 2011 Atex Zone: 22 Dcedpfsz Iqzcox Adrsn Accessories: - Suction hose - Replacement filter - Bag for fine dust Shipping via freight forwarder is possible or collection in 06112 Halle. Very good condition. Used for dry vacuuming in a printed circuit board production facility. Sale to commercial businesses only, excluding any warranty.

Year of construction: 2023, condition: used, 2023 | Wheel Cleaner WEXC-13 | Used Small Equipment Dcedpsznfdhefx Adrsn 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 12000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41134 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. Dcodsyffqqopfx Adron The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: new, functionality: fully functional, working width: 450 mm, area performance: 495 m²/h, overall weight: 55 kg, warranty duration: 12 months, input voltage: 230 V, water tank capacity: 45 l, TASKI PROCARPET 45 PROFESSIONAL CARPET AND RUG CLEANER Dcsdjy Aw A Uopfx Adren TECHNICAL DATA: Model: Procarpet 45 Manufacturer: Taski Type: Carpet and rug cleaning machine Country of manufacture: Switzerland Series: Professional Condition: NEW Theoretical capacity: 495 m²/h Weight when empty: 55 kg Working width: 450 mm Brush motor: 650 W Suction motor: 1000 W Solution tank: 45 l Waste tank: 45 l Brush speed: 1000 rpm Brush pressure: 10-17 kg Cable length: 15 m Rated voltage: 230 V Dimensions: 82 x 56 x 86 cm (L x W x H) WHY CHOOSE THE TASKI PROCARPET 45 The Taski ProCarpet 45 combines high performance, versatility, and professional cleaning quality. Designed for large surfaces, its 45 cm working width and large tanks (45 liters each) allow for long-lasting cleaning without interruption and increase work efficiency. One of its greatest advantages is the 2-in-1 system, which allows you to choose between a thorough extraction wash and a quick capsule cleaning. In practice, this means you can adjust the method to the level of dirt and time – from deep cleaning to quick refreshment with a short drying time. Another major advantage of this machine is its efficiency. The cylindrical brush and powerful suction system with two suction points ensure thorough dirt removal and very good carpet drying, resulting in a better end result and a faster return to use. Ease of use and ergonomics. - The control panel is intuitive and simple, and the device's design provides excellent visibility of the working area. Professional cleaning. - The machine is equipped with a 45 cm diameter brush and a 45-liter tank, perfectly combining compactness with the ability to clean larger surfaces. Designed for everyday, intensive use. - The Taski Procarpet 45 is a robust, durable, and reliable device, designed for long life and professional use.

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Dsdpfxsy R I Tms Adrocn Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: excellent (used), Year of construction: 2006, Esta Eurosog W/H 80.299 industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine, and free-flowing dust. The AC version is designed for occasional use in cleaning work in workshops. Its smooth-running wheels provide the industrial vacuum cleaner with high mobility. Dcodoivdt Espfx Adrsn The spacious dust collection container has a capacity of 80 liters. Thanks to the patented tilting device, the dust can be disposed of effortlessly. Application areas for the EUROSOG industrial vacuum cleaners: AC version for occasional use For dry, coarse, and fine dust For cleaning machining tools For general cleaning work (e.g., workshop floors) Can be used in many industries (e.g., wood and metal industry) Metal industry Construction industry Wood industry Chemical industry Printing industry Flock industry Cleaning industry Craft trades Automotive industry Mechanical engineering Stone industry Paper industry Tobacco industry and many more Your benefits at a glance: Powerful industrial vacuum cleaner for dry dust Compact design Easy disposal of the dust collection bag Special features of the EUROSOG-W series: Manual brush cleaning Washable permanent filter cartridges, available for dust classes M and H Optionally available with M and H test certificates Patented, tilting filter housing Manufacturer: ESTA Absaugtechnik Type: Eurosog W/H 80.299 with TÜV test certificate, dust class "H" Vmax: 360 m³/h Vmin: 815 m³/h pumax: 180 mbar Filter area: 5 m² Max. air volume flow: up to 500 m³/h 230 V Year of manufacture: 2006 Item weight: 81.00 kg RRP: €4900.00 You can find more industrial vacuum cleaners in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Dcodpfxezz Tm Rs Adrjn Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2008, condition: ready for operation (used), A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible. Dcodpfoxl Eltex Adren

Condition: as good as new (ex-display), Year of construction: 2022, High-pressure cleaner PTC Easypower E, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, etc. - Operating pressure: 300-700 bar - Flow rate: 15-30 l/min - Motor: Electric 32A/63A, 3-phase 400V-50Hz 20-30 HP / 15-22.5 kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Dry weight: approx. 180/210 kg - High-pressure pump: Comet three-piston pump with ceramic pistons - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with industrial wheels Dedpfxefdz E Ho Adrscn - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-delta starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels, 320 mm - Direct water intake via self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, 1200 mm stainless steel lance, and flat jet nozzle 15° The following models are available: Easy Power E 30/300 | 30 l/min, 300 bar | 18.5 kW Easy Power E 15/500 | 15 l/min, 500 bar | 15 kW Easy Power E 21/500 | 21 l/min, 500 bar | 22 kW Easy Power E 15/700 | 15 l/min, 700 bar | 22 kW

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, selling at very low price. Dcodpfowcfvpex Adren

Condition: used, functionality: fully functional, Price with dismantling. Dcedpfeyzhvvjx Adren Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic sorter. Drysorter equipped with Dynagrade 2015 (updated 2020).

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Dsdpjz I Dziefx Adrjcn Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Dcedpfeq Nx Alox Adrjn Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Dedezxzrpepfx Adrscn Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.