Used Dry-Running Double Pump for sale (25,344)

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Glanded double pump Glanded double pump in inline design for pipe installation or foundation installation with integrated frequency converter for electronic control for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled glanded double pump in inline design with flange connection and automatic power adjustment Application Pumping of heating water (in accordance with VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. Equipment/function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Actuator mode (n=constant) Manual operating level Setting the differential pressure setpoint Setting the speed (manual control mode) Setting the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgement External control functions “Priority Off” control input “External pump replacement” control input (only effective for dual pump operation) Analog input 0-10 V, 0-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for actuator operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal of the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal of the pressure sensor Message and display functions Collective fault message SSM Collective operation message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to the building automation system Safety functions Full motor protection with integrated tripping electronics Access lock Double pump management (double pump or 2 x single pump) 2 x single pump) Main/standby mode (automatic fault switchover) Main/standby mode Pump replacement after 24 hours Add-on mode Add-on mode (efficiency-optimized peak load switch-on and switch-off) Your benefits Energy saving thanks to integrated electronic power adjustment Simple operation thanks to green button technology and display Various operating modes: Main/standby mode and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (KLF) with tripping electronics Pjdpewbqrtefx Akvjra Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Nominal motor power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Interference emission EN 61800-3 Interference immunity EN 61800-3 Insulation class: F Protection class motor: IP55 Motor protection: KLF integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: € 29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our store! International shipping costs on request!

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor. Pedpjyc T Apjfx Akvora

Year of construction: 2021, condition: as good as new (ex-display), Rotary vane vacuum pump – dry running Pedpfx Ajhmfrajkvera Manufacturer: Becker Type: VTLF 2.250 Motor: 400V/50Hz Suction capacity: 250 m³/h Ultimate pressure: 200 mbar (absolute) Corresponds to 90% vacuum Status: New Delivery time: in stock

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22499562/0001, volume flow: 200 m³/h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 11 A, type of input current: AC, type of cooling: air, rotational speed (max.): 1,450 rpm, protection type (IP code): IP55, Wilo - 2120809 - Standard single dry-running pump IL 150/190-5.5/4, DN150, 3x400V, 5.5kW Prodpfeynxi Ejx Akvea

Condition: used, Rotary vane vacuum pump – dry-running Manufacturer: Becker Type: KVT 3.140 Motor: 400V/50Hz Suction capacity: 140 m³/h Ultimate pressure: 100 mbar (abs.) corresponds to 90% vacuum Prsdpfx Akjb Erpgovsa Status: General overhaul Accessories: Vacuum filter installed; operating manual Further details or technical advice are available upon request.

Condition: good (used), Rotary vane compressor – dry-running Manufacturer: Becker Podpfx Aksb Nu D Aevjra Type: KDT 3.140 Motor: 400V 7.5 kW / 50Hz Suction capacity: 140 m³/h Compression pressure: 2500 mbar (abs.) / 1500 mbar (overpressure) Condition: General overhaul and newly painted Warranty: 12 months Accessories: – Operating manual We are happy to answer any questions you may have.

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Predpfx Asbuqn Hokvoa Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Available at a special price – immediately available.

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS Pjdpow Ug Atsfx Akvsra 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: excellent (used), Year of construction: 2008, The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps Prodpfoikq Tyjx Akvsa - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE oil): 100 c/s Maximum suction capacity: 4035 m3/h Maximum speed: 5920 rpm Engine power S 1 / S 6: 9/5.6 kW Year of manufacture: 2008 Weight: 345 kg Dry pump: Manufacturer: Adixen Type: BF ADP122 Year of manufacture: 2008 Power 1.5 kW Maximum suction capacity: 95 m3/h Maximum continuous inlet pressure: 50 mbar Maximum exhaust pressure: 1200 mbar Cooling water: 60 l/h Speed ​​(pump): 3000-3600 rpm Operating temperature of the pump: from 5 °C to 40 °C Inlet flange: DN 50 ISO-KF Exhaust flange: DN 40

Condition: good (used), Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm Prodpfsdwf S Uex Akvoa -Weight: 32 kg

Condition: good (used), Murzan PI-50 Double diaphragm pump two in stock, ideal for handling suspended solids or shear sensitive products with no damage, easy to clean in place, applications juice, drinks, tomato paste, ketchup, yogurt, cottage cheese, eggs and more, 3 inch inlet and outlet, download PDF for full spec Podszvlkqjpfx Akvora

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development • High gas load applications • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Podpfozixyfox Akvjra Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Prjdpetu H Eiofx Akvea Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: new, Year of construction: 2013, functionality: fully functional, Dürr RAM Station Double barrel pump Pumps and dosing concept MPDK X20: Type L10011525 - Pneumatic gun PVA08/40 - Heatable hose KMHH6007/040 - Electric dosing unit ED150/7 Predpfx Aju Eqkvskvoa The device is unused!!!

Year of construction: 2021, condition: used, Claw vacuum pump Dry-running Manufacturer: Edwards Type: EDC 150 V Pumping speed: 150 m³/h Psdjhmbkhepfx Akvsra Ultimate pressure: approx. 50 mbar (abs.)

Condition: excellent (used), mytron 160 K CO2 Dual Incubator The CO2 incubator 160/160K ensures that cell and tissue cultures growing in vitro experience environmental conditions that closely mimic the physiological values ​​of the organism. Prodpfxoyfq U Ij Akvea mytron 160 K CO2 Dual Incubator The CO2 incubator 160/160K provides in vitro growing cell and tissue cultures with environmental conditions that closely resemble the physiological values ​​of the organism. Interior volume: approx. 160 l Weight: 70 kg Air circulation: via fan Cooling: refrigeration unit Temperature display: setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15 °C to 70 °C at 23 °C ambient temperature Temperature stability: +/- 0.2 K over time Humidity display: setpoint and actual value display Humidity range: ≥95% Humidity stability: +/- 2.5% CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 stability: +/- 0.2% CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 amps W x H x D = 130 x 85 x 70 cm Financing through our bank is also possible. komplett-konzept.leasingo.de Buy incubators and other products at great prices - Here you'll find products from professionals for professionals - Find more attractive offers in our shop

Condition: used, PD2052-AC2 / PD2052 AC2 / PD2052AC2, PR1800 + PD500, Hanbell Precise Machinery Co. LTD – Dry screw vacuum pump with display Model: PD2052-AC2 Prodpfx Akoitywrjvja Type: PR1800 + PD500 Condition: Used

Condition: excellent (used), Edwards Dry Pump We are offering an Edwards dry pump for sale. Prjdpfxszfy N He Akvea Boost speed m³/h – 1800 Forepump speed m³/h – 400 with intercooler Connection: 380-460V 3-phase 50/60 Hz Weight kg: 750 Type: iF30k NRC322000R Condition: used (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2013, condition: used, Claw vacuum pump Dry-running Manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction capacity: 250/300 m³/h Final pressure: approx. 100 mbar (abs.) Pedpfxocfw Tne Akvsra Accessories: Suction filter; Operating manual Delivery time: short-term

Condition: excellent (used), ARO PD30A-BSS-STT-C Stainless Steel Double Diaphragm Pump ARO's 3" metallic diaphragm pumps achieve flow rates of up to 1041 L/min and are available in a variety of materials. These pumps are frequently used in industrial applications for transfer, filling, and circulation. EXP series diaphragm pumps offer the best total cost of ownership and provide an optimal solution in terms of energy efficiency and downtime. Example media* for the PD30A-BSS-STT-C: Highly flammable liquids, mineral oils, paints, solvents, acids, alkalis, cleaning agents, wastewater, and much more. Suction and discharge connections: 3" BSP Max. flow rate: 1041 L/min Max. operating pressure: 8.3 bar ATEX certified: Yes Medium side material: Stainless steel Air motor material: Aluminum Diaphragm material: PTFE / Santoprene Ball material: PTFE Ball seat material: Stainless steel Max. solid size: 9.5 mm Air connection: 3/4" NPT Prodpfxop U T I Hs Akvoa Weight: 103.8 kg Manufacturer's price: €20,976.13 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items in other sizes – new and used – in our shop! International shipping costs on request!

Condition: refurbished (used), Various Almatec pumps, plastic and stainless steel versions, all sizes of the AH series, cpl. refurbished and available at short notice Pjdpfofcy A Hex Akvora

Year of construction: 2010, condition: used, Claw vacuum pump Dry-running Predsdkaf Uspfx Akvja Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction capacity: 300 m³/h Ultimate pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: Like new Accessories: Suction filter; operating manual Delivery time: short notice

Condition: new, Year of construction: 2026, Rotary dry vane vacuum pump model MVS-V250. Available in stock. Completely new with 12 months warranty. Nominal flow: 250 m3 / h at 50Hz. Prodeftzviopfx Akvoa Final vacuum: 200 mbar Any clarification, do not hesitate to contact us.

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump Podpeg Avqcsfx Akvsra -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: refurbished (used), Rexroth pump axial piston pump AKP140R with valve for ENGEL Type: AKP140R with valve Manufacturer number: R901021899 Type code: SYDFEE-20/140R Prodox Uqxaepfx Akvsa