Used Dunkes Dz 4 for sale (58,126)

Condition: good (used), functionality: fully functional, Type DZ 4 Ljdpfx Asyr Siaoiioab Press force at 6 bar 4 t Press force at 12 bar 8 t Table size W x D approx. 280 x 280 mm Installation height 350 mm Throat depth 160 mm

Condition: good (used), Year of construction: 1994, functionality: fully functional, operating hours: 25,000 h, pressing force: 400 t, table width: 1,250 mm, table length: 1,240 mm, table height: 1,125 mm, oil tank capacity: 3,400 l, total width: 3,500 mm, total height: 4,600 mm, installation height: 600 mm, Further images and technical data can be provided by email upon request. Sale is ex-location without warranty and return. Dismantling and collection must be carried out by the buyer. The press is standing at ground level without a base. We deliver the press media-free. The digital hours counter is no longer accurate. The manual counter shows approximately 25,000 hours. Ljdpfx Aisvb D Trjioab

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Lodedzp T Nopfx Aiioab Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Condition: used, Year of construction: 1991, pressure 100 t distance between columns 770 mm stroke 200 mm distance table/ram, stroke up 800 mm Table area 770 x 900 mm table height above floor 850 mm die cushion pressure in table 40 t die cushion stroke in table 200 mm die cushion area in table 600 x 600 mm side window 600 mm ram surface 770 x 900 mm speed down 62 mm/s speed up 350 mm/s working speed 17,5 mm/s oil volume 700 l power requirement 42,0 kW weight 9,0 t Dimensions (WxDxH) 2,6x 2,0 x 3,8 m with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop No foundation pit necessary Laedpfx Aovut Ufeiieb

Condition: used, Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Air inlet and outlet: adjustable Lododk I T Dopfx Aiijab -Number: 1x available -Price: per piece -Dimensions: 95/95/H345 mm -Weight: 5 kg

Condition: used, Year of construction: 1975, pressure 40 t throat 280 mm stroke 160 mm dayligth 420 mm Laedjyx Ihaepfx Aiisb table surface area 2000 x 500 mm table height over floor 870 mm ram surface 85 mm power requirement 7,5 kW weight of the machine ca. 3,2 t required space 1,7 x 2,0 x 2,3 m with oilhydraulic drive, shaft straightening device, manual lever control

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t Lasdpfxevuucko Aiiob required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 1650 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1200 mm table surface area 1600 x 1250 mm die cushion capacity 80 t die cushion stroke 300 mm die cushion area 1300 x 900 mm table height over floor 800 mm ram surface 1600 x 1250 mm oil volume 2000 l power capacity 43,0 kW weight 25,0 t Dimensions (WxDxH) 2,9 x 2,3 x 5,8 m height beneath floor 0,85 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work Ljdpexwdrvsfx Aiioab free loaded to truck

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2350 mm Lsdjvuugvepfx Aiisab distance table/ram, max. stroke up, adjustment up 1200 mm distance between cutting impact cushioning 1600 mm Distance table/ram, stroke up 1200 mm stroke 800 mm table surface area 2060 x 1260 mm table height over floor 750 mm Die cushion pressure in table 100 t Die cushion stroke in table 400 mm die cushion area 1250 x 1000 mm side window 780 mm ram surface 2200 x 1500 mm Capacity of ejector in ram 63 t speed down 500 mm/s speed up 310 / 410 mm/s working speed 20 - 73 mm/s quantity of oil 3900 l power requirement 80,0 + 45,0 kW weight 55,0 t Dimensions (WxDxH) 4,6 x 2,7 x 7,2 m Height above floor 6,0 m Height below floor 1,2 m with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, hydraulic ram interlocking

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics Laedpfx Aiowg R I Esiob The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE ////

Year of construction: 2016, condition: reconditioned (used), Machine name:Dunkes drawing press Type:HDZ 160 Year of manufacture:1988 Year of reconstruction:2016 Electrical drawing:16001E1 Operating voltage:3AC 400V Lsdpfx Aopl T Rwjiioab Frequency:50Hz Rated current:100A Control voltage:24 VDC

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 4,800 mm, free lift: 1,240 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Brand new Technical condition: New Front tire type: Superelastic Front tire condition: New Rear tire type: Superelastic Rear tire condition: New Battery voltage: 80V Battery type: Lithium-ion Battery year: 2026 Description: Brand new equipment including 12 months warranty. Anton is a cooperation with EP Forklift (China) and is suitable for light-duty applications. NEW Li-ion battery incl. integrated charger. We can gladly arrange cost-effective transport for you. Lease-purchase is generally possible! We are an official Jungheinrich partner. Lodpfxsy Hylae Aiioab Side shifter, 3rd valve, 4th valve, rear working lights, front working lights, heater, fully enclosed cabin, full free lift, CE certificate,

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,000 kg, lifting height: 4,800 mm, free lift: 1,240 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: New unit Technical condition: New Front tires type: Superelastic Front tires condition: New Lodpfxey Hykcj Aiijab Rear tires type: Superelastic Rear tires condition: New Battery voltage: 80V Battery type: Lithium-ion Battery year: 2026 Description: Brand new machine including 12 months warranty, Anton is a cooperation with EP Forklift (China) and suitable for light-duty applications. NEW Li-ion battery including integrated charger. We are happy to organize cost-effective transport for you. Lease-purchase is generally possible! We are an official Jungheinrich partner. Side shifter, 3rd valve, 4th valve, rear working lights, front working lights, overhead guard, front windscreen, full free lift, CE certificate,

Condition: good (used), Year of construction: 2008, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Lasdpey Ev Iujfx Aiijb Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: used, Year of construction: 2005, weight max. in kg 1.250 kg stroke 4.300 mm fork length 1.150 mm load center 600 mm power capacity 2 kW Battery voltage 24 V Curb weight without battery 1.318 kg Battery weight min/max 349/386 kg The forklift is not operational and is being sold as defective! Accessories, tools, and clamping devices shown in the images are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Laodpoy Dh Uwsfx Aiijb Prior sale is reserved.

Condition: used, functionality: fully functional, machine/vehicle number: 8701, Year of construction: 1999, operating hours: 2,117 h, load capacity: 1,250 kg, lifting height: 4,360 mm, free lift: 1,700 mm, fuel type: electric, mast type: duplex, fork length: 1,250 mm, drive type: Elektro, High-lift order picker Chassis number: 8701 Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Laodpeym Hdzsfx Aiisb Technical condition: normal Front tire type: Solid rubber Rear tire type: Solid rubber Battery voltage: 48V Battery type: PzS

Condition: used, functionality: fully functional, machine/vehicle number: FN664051, Year of construction: 2021, operating hours: 1,119 h, load capacity: 2,000 kg, lifting height: 4,640 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: FN664051 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Solid rubber Front tire condition: 80 - 100% Ljdpfx Aieylqrmeieab Rear tire type: Solid rubber Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: JH Battery type: PzS Battery year: 2021 Battery condition: 80 - 100% Sideshift, 3rd valve, rear work lights, front work lights,

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91128553, Year of construction: 2018, operating hours: 1,213 h, load capacity: 1,400 kg, lifting height: 4,550 mm, mast type: triplex, fork length: 1,150 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,400 kg Lifting height: 4,550 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex Power: 6 kW Fuel type: electric Battery model: 4EPZS 620 Battery capacity: 620 Ah Remaining battery capacity: 95% Battery voltage: 48 V Battery weight: 935 kg Tyre condition: 65% Front tyre type: Superelastic tyres (black) Rear tyre type: Superelastic tyres (black) Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,200 mm Unladen weight without battery: 2,105 kg Total weight with battery: 3,040 kg Operating hours: 1,213 h EQUIPMENT Cabin Pallet forks Sideshift Central lubrication system Ljdpfx Aijyq Hirsieab Standard joystick Operator protective roof Full free lift Battery charger model SLT150

Condition: used, Fan, fan, electric motor, blower -Speed: 1425 rpm -Fan diameter: 500 mm -Dimensions: 680/680/H300 mm Ljdpfx Aocft Trsiioab -Weight: 32 kg

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Lsdpfodq U S Ijx Aiijab -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Ledpew N Iz Hjfx Aiioab Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 5,802 h, load capacity: 3,000 kg, lifting height: 4,950 mm, free lift: 1,520 mm, overall weight: 5,802 kg, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,950 mm Overall height: 2,270 mm Free lift: 1,520 mm Forks: 1,200 mm Lsdpfjx E S Nnjx Aiioab MACHINE DETAILS Drive type: Electric Battery: 80 V / 620 Ah (2018) Weight: 5,802 kg Front tires: 23x10-12 (10 %) Rear tires: 6.50-10 (80 %) Operating hours: 11,799 h EQUIPMENT 3rd hydraulic valve 4th hydraulic valve Rear work light Front work light Half-cab Heater Side shifter Fork positioner

Condition: used, functionality: fully functional, machine/vehicle number: FN5095.., Year of construction: 2016, operating hours: 3,382 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,490 mm, empty load weight: 5,814 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: FN5095.. Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires condition: 20 - 40% Rear tires type: Superelastic Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: JH Battery type: PzS Battery year of construction: 2016 Battery condition: 60 - 80% Laedpjvxxq Tefx Aiijb Sideshifter, SE tires black, not white as shown in the pictures! 3rd valve, 4th valve, rear working lights, front working lights, roof cover, front windshield, half-cab, full free lift,

Condition: used, Year of construction: 1987, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 4,000 mm, Technical data Siemens Sinumerik 840 DSL control system Main dimensions and travels Face plate diameter 3,500 mm Rotation diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Cross beam Vertical adjustment of the crossbeam in 50 steps 1,500 mm Crossbeam support (right) Horizontal adjustment of support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool positions Laedpeu R D Tnofx Aiiob Cross beam support (left) Horizontal adjustment of support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool changer without side support (right) Main drive: Power of the main motor 100 kW Speed range of the faceplate 1-100 rpm. Maximum torque on the face plate 100 kNm Drilling and milling drive vertical support: Power of the drive motor 22.5 kW Maximum torque 900 Nm Without drilling and milling drive side support Total weight Connection values of the machine Machine connection voltage 380 Volt / 50Hz Control voltage 220V AC / 24V DC Total connected load 150 kVA Required back-up fuse 400 A Equipment and accessories: Operator platform Chip conveyor Cooling lubricant system Tool changer Tool measuring probe RENISHAW

Condition: used, Year of construction: 1987, turning height: 5,000 mm, workpiece weight (max.): 80,000 kg, turning diameter: 5,000 mm, Technical data SIEMENS SINUMERIK 840 Dsl control system Main dimensions and travels Face plate diameter 4,000 mm Rotation diameter (max.) 5,000 mm Lajdpsu R Etpefx Aiisb Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Cross beam Vertical adjustment of the cross beam in 50 steps 3,200 mm Crossbeam support (right) Horizontal adjustment of support - 2740 + 2740 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool positions 0 without vertical support (left) Lateral support (right) Vertical adjustment of support -25 + 2170 mm Horizontal displacement of the chisel slide 1,000 mm Cross section of the chisel slide 250x210 mm Turning diameter max./min. 4,500/2,500 mm Tool changer Main drive: Power of the main motor 100 kW Speed range of the faceplate 0.63 - 63 rpm Maximum torque on the faceplate 160 kNm Drilling and milling drive side support: Power of the drive motor 22.5 kW Maximum torque 900 Nm Connected loads of the machine Connection Voltage of the machine 380 Volt / 50Hz Control voltage 220V AC / 24V DC Total connected load 150 kVA Required back-up fuse 400 A Equipment and accessories: Operator platform Chip conveyor Cooling lubricant system Tool changer Tool measuring probe RENISHAW