Used Eckold Mz 10 for sale (30,073)

Year of construction: 1979, condition: used, throat: 22/29 mm Bljdpfjzif Ssx Ahmjn drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg pressure power: 30 kN

Condition: good (used), Year of construction: 1993, machine/vehicle number: 399/093, Offer 24464 Technical data: - with ECKOLD pressure joining pliers, type MZ - Working pressure infinitely variable max. up to 500 bar Bedpfxouzwc Do Ahmsln - Joining gun pressure force 25 Kn - Single cycle or continuous cycle - Infinitely variable number of cycles - Hose package power unit - tongs approx. 4 m - Hydraulic oil capacity 15 ltr - Drive 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Condition: used, Year of construction: 1990, machine/vehicle number: 456 / 378, Ref. No. 25062 Technical Data: Bodpjw Dc Ufefx Ahmoln - With ECKOLD clinching pliers, type MZ + punching device - Working pressure continuously adjustable up to max. 500 bar - Pressing force of pliers: 25 kN - Single stroke or continuous operation - Stroke rate infinitely variable - Hose package unit – pliers approx. 4 m - Hydraulic oil capacity: 15 l - Drive: 400 V / 3 kW - Space requirement approx. W 550 x H 850 x D 650 mm - Weight approx. 150 kg

Condition: good (used), Year of construction: 1988, total width: 100 mm, total length: 100 mm, total height: 200 mm, overall weight: 13 kg, Eckold tool Bodez D Aw Ijpfx Ahmoln ECKOLD - FWR 1003/4X MACH-ID 9698 Make: ECKOLD Type: FWR 1003/4X YOP: 1988 Length:100mm Width:100mm Height:200mm Weight:13kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1993, condition: good (used), Offer 23100 Bedelnkrmjpfx Ahmsln Technical specifications: - Punching capacity, steel: 2 to 4 mm - Punching capacity, stainless steel: 2 to 3 mm - Horizontal reach: 30 mm - Vertical reach: 40 mm - Hydraulic unit, manufacturer NOLD, type No. 40.9-4, year of manufacture 1993 - Operating pressure: 250 bar - Drive: 400 V / 4 kW - Space requirement: W 600 x H 800 x D 900 mm - Weight, approx.: 350 kg

Condition: good (used), Eckold tool ECKOLD - WT 100T MACH-ID 9694 Make: ECKOLD Type: WT 100T Year: 2018 Type WT 100 T / NFW Forming method Planishing and calibrating Special features Exchangeable inserts suitable for Finishing with custom-shaped tools Bljdpfx Aez Arlnohmen Sheet thickness Steel (Rm = 400 mm2) 3.0 mm Sheet thickness Stainless steel (Rm = 600 mm2) 3.0 mm Sheet thickness Al (Rm = 250 mm2) 3.0 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 1,450 mm, travel distance Y-axis: 2,250 mm, number of axes: 4, This 4-axis HBS MPW 2010/3K/4MZ/1FK was manufactured in 2019. It features a maximum X-axis travel of 1450 mm and Y-axis travel of 2250 mm, with a motorised working stroke of 0-200 mm. The machine is equipped with advanced servomotor technology and includes a fully automatic stud feeder and a chip extraction unit. If you are looking to get high-quality welding capabilities, consider the HBS MPW 2010/3K/4MZ/1FK machine we have for sale. Contact us for further details. - Working Range (X-axis): 1250 mm (heads 1 to 3) / Max. 1450 mm- Working Range (Y-axis): 2250 mm- Work Stroke (Z-axis): 0-200 mm (motorized, freely programmable, total stroke 215 mm)- Traverse Speed (X/Y-axis): approx. 48 m/min- Traverse Speed (Z-axis): approx. 25 m/min- Welding Capacity: approx. 30 to 40 studs/minute- Machine Accuracy (Steel/Aluminium): ± 0.2 mm (for HBS CD studs Ø3 - Ø8mm)- Stud Diameters: Ø 3 mm to Ø 8 mm (with flange)- Stud Lengths: 8 mm to 40 mm (feed output for 7 to 50 mm)- Primary Power: 3 x 400 V AC / 32 A / 50-60 Hz- Connected Load: max. 12 kVA- Air Connection: min. 6 bar, max. 10 bar- Air Consumption: approx. 10 l/welded stud- Control Unit: HBS PC Control (Schneider Electric)- Power Units: 3x HBS-CDMI 2402 / 230V EU units- Automatic Stud Feeders: 1x HBS VBZ-3 fully automatic stud feeder with bowl feeder- Automatic Welding Heads: 1x HBS KAH 412C LCD automatic welding head- Safety System: Category 4 safety light curtain (1500 mm height) with 2-side perimeter fence and Emergency Stop Included Accessories: Bljdpfxozx S Rcj Ahmjn HBS tool/conversion case for KAH 412, pneumatic hold-down device (HBS-PN-NH), 3-nozzle sprayer (MPW TC), VBZ-U6 conversion kit (Ø 3, 4, 6, 8 mm)

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Bljdpfx Ahezidz Ijmen Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,900 kg, Equipment: documentation/manual, ECKOLD KF 653 C / Power Former & Various Tools / Sets -Reach - Horizontal approx. 600mm -Reach - Vertical approx. 480mm -Working stroke 8mm -Formable sheet metal thicknesses: Steel (Steel N/mm2) max. 6mm Blodpoz Azrwjfx Ahmon Aluminum (250 N/mm2) 8mm Stainless steel (600 N/mm2) 4mm -Ram adjustment approx. 80mm -Foot switch -Tools (SEE PICTURES) -Sheet metal forming tool description & spare parts lists -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Year of construction: 2000, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,200 mm, spindle motor power: 27,000 W, spindle speed (max.): 3,000 rpm, number of axes: 3, This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine. Bedpfx Aoyguz Uehmeln • Table size: 1,300 x 1,100 mm • W-axis travel (boring head): 600 mm • B-axis rotation (rotary table): Continuous • Spindle orientation: Horizontal • Tool magazine: 30 positions Technical Specification Taper Size ISO 50

Condition: good (used), Year of construction: 2006, ECKOLD - Eckold PFW100T Doming tool for MAX. 4 mm Eckold PFW100T Doming tool for MAX. 4 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Bodozdgcljpfx Ahmeln

Condition: good (used), Year of construction: 2017, total width: 100 mm, total length: 300 mm, total height: 180 mm, overall weight: 12 kg, MACH-ID 9686 Make: ECKOLD Bljdpfxez Arzpe Ahmjn Type: HLR60 Year: 2017 Length:300mm Width:100mm Height:180mm Weight:12kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2010, total width: 680 mm, total length: 1,250 mm, total height: 1,740 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 505 kg, sheet thickness steel (max.): 1 mm, Eckold Kraftformers Piccolo ECKOLD - KF 324 MACH-ID 9815 Make: ECKOLD Type: KF 324 YOP: 2010 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists For Artisans and Craftmen Equipped with tool storage shelf in side column Machine equipped for tooling: FWR 402S FWA 403S   Number of strokes: 400Min. Maximum sheet thickness: 2.0mm Horizontal troath: 340mm Vertical troath: 235mm Max. thickness Stainles: 1.5mm Max. thickness Aluminium: 2.5mm Manuel / Hand ram adjustment:32 Power: 1.5kW Length: 1250mm Width: 680mm Bljdpez Ha Ipjfx Ahmjn Height: 1740mm Weight: 505kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, COMPLETE POWDER MIXING, WEIGHING & BAGGING PLANT – RUBERG / PAGLIERANI Complete industrial plant for mixing, weighing, conveying, and bagging of fine dry powders. The equipment is currently installed, FULLY OPERATIONAL, and available for inspection and demonstration in operation. The equipment is offered either AS A COMPLETE PACKAGE OR AS INDIVIDUAL MACHINES / SYSTEMS. The plant has been used for the processing and packaging of fine mineral powders. EQUIPMENT INCLUDED: RUBERG CM 2000 – 2,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM 2000 Batch capacity: approx. 2,000 kg Industrial batch mixer SEW main mixer drive: 37 kW Main mixer speed: 35 rpm 2 side rotor drives: 2 x 5.5 kW Side rotor speed: 720 rpm Georg Büttner weighing system Weighing range: 0–2,000 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 17 t/h Available separately or as part of the complete plant. RUBERG CM-ZE 1000 2SR – 1,000 KG MIXING SYSTEM Manufacturer: Gebr. Ruberg GmbH & Co. KG, Germany Model: CM-ZE 1000 2SR Year of manufacture: 2001 Machine No.: 168 / 11013 Useful mixing volume: approx. 1,000 liters Total mixing chamber volume: approx. 1,300 liters Industrial batch mixer Main mixer drive: 15 kW Main mixer speed: 40 rpm 2 side rotor drives: 2 x 7.5 kW Side rotor speed: 1,455 rpm Georg Büttner weighing system Weighing range: 0–1,100 kg Resolution: 1 kg RUBERG bucket elevator Elevator capacity: approx. 10 t/h Pneumatically operated discharge system Discharge connection: DN 630 Filling connection: DN 175 Inspection connection: DN 150 Available separately or as part of the complete plant. PAGLIERANI TP35 WEIGHING & BAGGING MACHINE WITH ULTRASONIC SEALING Manufacturer: Paglierani S.r.l., Italy Model: TP35 Type: Weighing and bagging machine for valve sacks Number of filling spouts: 1 Application: Finely ground dry powders Main features: Single filling spout Horizontal-axis filling turbine Integrated weighing system Load cell Pneumatic bag support and clamping system Pneumatic product flow control Product feeding hopper Electrical control cabinet Pneumatic controls Conveyor arrangement Ultrasonic valve sack sealing system BRANSON ULTRASONIC SEALING UNIT Manufacturer: Branson Ultraschall / Emerson Technologies Model: Digital Compact 222 Serial No.: DAB 08102435 A The Paglierani TP35 is also available separately. CONDITION: Used – fully functional. All equipment is currently installed and can be inspected and demonstrated in operation by appointment. DOCUMENTATION: Bljdpszv S Tlsfx Ahmen Technical documentation, operating manuals, and technical drawings are available for several components. Further photographs, documentation, and technical information are available upon request. SALE OPTIONS: The complete plant is offered as one package, but the individual RUBERG mixing systems and PAGLIERANI bagging system can also be purchased separately. Price for individual machines/systems: on request. Location: Greece Availability: Upon agreement Inspection and demonstration in operation: By appointment Dismantling, loading, and transport can be discussed separately.

Condition: ready for operation (used), Year of construction: 2011, punching force: 31 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, controller manufacturer: FANUC, number of axes: 2, This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4,5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0,1 mm • Z-turret stations: 45 • AutoIndex stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 1/min • Max. number of hits: 1000/min • Machine frame: Bridge frame • Punching drive: Servo-electric Twin Drive • Drives (turret + table): AC-Servo motors • Clamps: Pneumatical • Electrical connection: 400V / 50Hz • Electrical consumption: 1 kW – 7 kW • Air consumption (machine): 250 l/min • Air consumption (Air Jet Vakuum): 250 l/min Additional equipment • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0,5 – 8,0 mm • Max. loading weight: 300 kg • Max. stack height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. feed rate (traverse): 70 m/min • Number of suction cups: 34 pieces • Double sheet control: Yes, with sheet thickness detector • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with Parts Remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie) • Max. part weight: 50 kg • Storage table size: 3400 x 1400 mm • Max. part size for unloading clamps: 3000 x 1500 mm • Max. stack height skeleton table: 450 mm • Max. weight skeleton table: 2000 kg Bodpfxjx D Hpqj Ahmjln • Max. stack height storage table: 450 mm • Max. weight storage table: 4000 kg • Max. feed rate X-/Y-direction: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar inlet pressure • Electrical connection: 400V

Condition: ready for operation (used), Year of construction: 2007, punching force: 31 t, sheet thickness (max.): 5 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, number of axes: 2, CNC punching machine manufactured in 2007. This AMADA EMZ 3610 NT features a press force of 300 kN and a travel distance of 2500 mm in the X-axis and 1525 mm in the Y-axis. It has a maximum material thickness capacity of 4.5 mm and a stroke rate of 1000 strokes per minute. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for further details. Bsdsztc Izopfx Ahmeln • Press force: 300 kN • Travel distance X/Y: 2500 mm/1525 mm • Travel distance X/Y with repositioning: 5000 mm/1525 mm • Max. material thickness: 4.5 mm • Max. table load: 160 kg • Travel speed X/Y: 100 m/80 m/min • Axis speed: 128m/min • Positioning accuracy: +/-0.1mm • Turret stations 45, auto-index stations: 2xB/2xC • Turret speed: 30rpm • Stroke rate: 1000 strokes/min • Machine weight: approx. 21000kg

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 10 kg, arm reach: 1,100 mm, THIS ROBOT HAS NEVER BEEN USED The NACHI MZ10LF is a high-speed, high-precision 6-axis industrial robot designed for fast and reliable automation tasks such as pick & place, assembly, packaging, screw driving, and light to medium material handling applications. With its long reach structure and rigid arm design, it provides excellent cycle times and stable performance, making it ideal for high-volume production environments requiring extended working range. Applications: Pick & place, assembly, packaging, sorting, screw fastening, and general automation tasks. Technical Specifications: Model: MZ10LF Type: 6 axis Payload: up to 10 kg Reach: approx. 1100–1200 mm (long reach version) Repeatability: ±0.02 mm Bledozgtwyopfx Ahmsn Axes: 6 Communication: PROFINET enabled Installation: Floor mounted Stock: Multiple options available Price: Please get in touch to get an offer As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. We have a dedicated team handling these robots. If you share details about your project, we can recommend and provide the most suitable robot for your needs and support you throughout your project.

Year of construction: 2010, condition: like new (used), We are selling: TOTAL WALTHER spray deluge system / sprinkler container with 13 extinguishing groups, year of manufacture 2010, used for a short period only, in new condition. The system is still completely installed (including piping). The spray deluge system automatically monitors its operational readiness. Monitoring center, manufacturer: TOTAL WALTHER; type: MZ382100; approval number: G4860030. Number of monitoring contacts: 41 Fully functional On-site inspection possible at any time Bsdpfxegnguvo Ahmjln Offered price in 2010: €161,422.00 Additional documents (technical data sheets, operating instructions, etc.) can be requested if needed.

Condition: good (used), Year of construction: 2001, total width: 680 mm, total length: 1,215 mm, total height: 1,740 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 505 kg, sheet thickness steel (max.): 1 mm, Eckold Kraftformers Piccolo ECKOLD - KF 324 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists For Artisans and Craftmen Equipped with tool storage shelf in side column Machine equipped for tooling: FWR 402S Bledpfxsz Ha Agj Ahmjn FWA 403S Number of strokes: 400Min. Maximum sheet thickness: 2,0mm Horizontal troath: 340mm Vertical troath: 245mm Max. thickness Stainles: 1,5mm Max. thickness Aluminium: 2,5mm Manuel / Hand ram adjustment:32 mm Power: 1,5kW Length: 1215mm Width: 680mm Height: 1740mm Weight: 505kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2013, functionality: fully functional, load capacity: 1,000 kg, total height: 850 mm, total length: 2,000 mm, total width: 1,100 mm, rotary table diameter: 900 mm, overall weight: 1,100 kg, height adjustment type: hydraulic, table load: 1,000 kg, disc diameter: 900 mm, product height (max.): 1,350 mm, faceplate diameter: 900 mm, workpiece weight (max.): 1,000 kg, plate diameter: 900 mm, Equipment: foot remote control, Max load: 1000 kg Table size: Ø900 mm Bljdez H Npiepfx Ahmon Max. height with vertical table: 1350 mm to middle of table Rotation speed: 0.1 - 1.2 rpm Featured with: Wired remote control Country of origin: The Netherlands Motor power: 0,75 kW Machine (L×W×H): 200 x 110 x 85 cm Machine weight: 1100 kg

Condition: good (used), Year of construction: 1990, total width: 80 mm, total length: 80 mm, total height: 200 mm, overall weight: 9 kg, Eckold tool ECKOLD - FWA 802/3T MACH-ID 9696 Make: ECKOLD Type: FWA 802/3T YOP: 1990 Length:80mm Width:80mm Height:200mm Bjdpfez Eqkxex Ahmoln Weight:9kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, Eckold tool ECKOLD - HLA60 MACH-ID 9687 Make: ECKOLD Type: HLA60 Year: 2001 Beak-Shaped shrinking dies for U-profiles Bljdpfx Ahez A Trgjmen They are specifically made to eliminate marring the material while shrinkin These jaws fit the Eckold KF170PD Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2005, Available immediately ex-works: Hydraulic plate shear Baykal Type MGH 3100/10 Year of manufacture 2005 CNC control Delem Dac 310 Blsdpsz Hu Ecsfx Ahmjn Cutting length 3060 mm Material thickness 10 mm Controlled back gauge 1000 mm Drive power 22 kW Strokes/min 12 Weight 9600 kg Dimensions 5000/2600/2000 mm Price: Euro 9,500.00 plus VAT ex-works.

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 625RS10HWPp-D22092022, coil weight: 10,000 kg, feed rate X-axis: 35 m/min, number of straightening rollers: 5, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,250 mm, mandrel diameter: 508 mm, coil width: 1,250 mm, coil outer diameter: 1,250 mm, number of blades: 8, type of input current: three-phase, working width: 1,250 mm, total width: 4,500 mm, total length: 5,700 mm, total height: 1,600 mm, load capacity: 10,000 kg, product width (max.): 1,250 mm, space requirement width: 4,500 mm, space requirement length: 5,700 mm, space requirement height: 1,600 mm, Krasser Centurio SCS-1250 slitting line with a Stolarczyk 10-ton motorized uncoiler For sale: a complete coil-fed sheet metal cutting and slitting line, manufactured by Krasser GmbH (Austria), installed new in January 2023 and used in-house ever since by a sheet metal processing company. Well-maintained, fully operational, and available for inspection while still running at our facility. Krasser Centurio SCS-1250 – slitting/cutting line Max. sheet/coil width: 1,250 mm — min. independent sheet width: 250 mm — min. slitting width: 75 mm between knives Material thickness range: steel (400 N/mm²) 0.4–1.5 mm, stainless steel (550 N/mm²) 0.4–1.0 mm, copper and aluminum 0.5–2 mm Max. cutting speed: 35 m/min Bedoz D Ivvspfx Ahmjln Straightening unit: 5 rollers Longitudinal cutting: 6 pairs of slitting knives installed (5 standard + 1 additional pair), max. 8 Cross-cutting: electrically driven guillotine shear Roller-shear unit for partial cross-cuts included Automatic film-application (plastic protective film) unit included Automatic labeling unit included (label printer + applicator) Krasser Optimizer cutting-optimization software included Touchscreen HMI control, multilingual (including Spanish) CE-certified safety fencing Electrical connection: 3-phase 400–488V, 11 kW, 16A Pneumatic connection: 1/2", 6 bar, filtered and dried air, 50 l/min Approx. overall footprint (line + uncoiler): 5.7 m long x 4.5 m wide x 1.6 m high Lifetime production data (as of today): 176,941 m of material processed, 60,610 cross-cuts — machine has been in steady, reliable production use Stolarczyk uncoiling set (motorized, 10 tons) Manufacturer: Spółka Stolarczyk (Poland) — Type RS10HWPp-D, year 2022 Max. coil load: 10,000 kg (10 tons) Hydraulic mandrel expansion — mandrel/coil inner diameter 508–610 mm Max. coil outer diameter: 1,250 mm — coil width: 250–1,250 mm Max. unwinding speed: 30 m/min Coil car included, with hydraulic vertical lift (306 mm) and electric horizontal travel Electrical connection: 400V, 6.5 kW Weight: 3,150 kg The line and uncoiler are sold together as a working unit. Removal/dismantling and logistics to be agreed with the buyer. For technical questions or to arrange a visit, please contact us by email — we're glad to answer any question and share further documentation, photos, or a video of the machine running.

Condition: good (used), Year of construction: 1993, total width: 680 mm, total length: 1,215 mm, total height: 1,740 mm, sheet thickness aluminum (max.): 2 mm, overall weight: 505 kg, sheet thickness steel (max.): 1 mm, Eckold Kraftformers Piccolo ECKOLD - KF 324 Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists For Artisans and Craftmen Equipped with tool storage shelf in side column Machine equipped for tooling: FWR 402S FWA 403S   Number of strokes: 400Min. Maximum sheet thickness: 2,0mm Horizontal troath: 340mm Vertical troath: 245mm Max. thickness Stainles: 1,5mm Max. thickness Aluminium: 2,5mm Manuel / Hand ram adjustment:32 Blsdpfez Ha Dkex Ahmon Power: 1,5kW Length: 1215mm Width: 680mm Height: 1740mm Weight: 505kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!