Used Edelstahl Höhe 25 Mm for sale (77,460)

Condition: used, Hinge, door hinge, folding hinge, steel hinge, side wall hinge -Hinge: with extendable pin Kdsdpfx Afouahyujdjk -Type: 2-part 100/50 mm height 25 mm see photos -Material: stainless steel -Number: 72x hinge available -Price: per piece, minimum order 2 pieces. -Total dimensions: 100/40/H25 mm -Weight: 0.1 kg/piece

Condition: good (used), Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece Kdsdpob Uhnfsfx Afdjk -Dimensions: 540/440/H250 mm -Weight: 3.7 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm Ksdpfx Afjb Tl Dnsdedk -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg

Condition: good (used), Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 450 x 450 mm -Depth: 250 mm -Edge: 18 mm -Drain: Ø 60 mm -Quantity: 15x available -Price: per piece -Dimensions: 540/440/H250 mm Kdodpfxjb Uhnce Afdok -Weight: 3.7 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm Kdedpfx Afsb Uhnasdjk -Weight: 4.3 kg

Condition: used, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, incline conveyor, incline conveyor, chip conveyor, chip conveyor -Conveyor belt: on mobile base -Speed: 30m/min -Conveyor belt width: 115 mm -Conveyor belt length: 1625 mm, dimensions see photo techn. drawing -Height: 810 mm Kjdpelntn Tofx Afdjdk -Propulsion: Bonfiglioli 0.37 kW -Individual components: see photos -Total dimensions: 1645/600/H915 mm -Weight: 62 kg

Condition: excellent (used), Transport trolley with 2 trays -Stainless steel tub dimensions: 600/400/H220 mm -Design: stable -Dimensions: 540/725/H800 mm Kedpfjb Uhnkjx Afdsdk -Weight: 30 kg

Condition: good (used), Trolleys, transport trolleys, wheelchairs, transport dog Kjdob A Htiepfx Afdjdk -Angle frame: 825 x 550 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available -Price: per piece

Condition: used, Hand wash basins, wash basins, built-in basins -Stainless steel sink Kdsdpfxeb Uhmte Afdek -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece Kdsdpob Uhm Ssfx Afdek -Dimensions: 440/440/H300 mm -Weight: 3 kg

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing Kdedpfx Afod Sqyiedek -Pipe sealing cushions -Outside/Inside: Ø 125/60.3 mm -Height: 58 mm -Number: 12x pillows available -Price: per piece -Weight: 1.3 kg/piece

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions Kodpfxsd Tfq Eo Afdodk -Outer/inner diameter: 200/125 mm -Height: 58 mm -Number: 9x pillows available -Price: per piece -Weight: 2.9 kg/piece

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outer/inner diameter: 250/180 mm -Height: 30 mm -Number: 3x pillows available -Price: per piece Kedpfx Afjd Tfrfsdedk -Weight: 2.2 kg/piece

Condition: used, Stainless steel VA chimney cover, chimney hood -Bracket distance inside: 560 mm Kdedpeb Uhmzefx Afdok -Dimensions: 625/855/H210 mm -Weight: 6.3 kg

Condition: used, Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor -Body: made of stainless steel -Speed: 30 m/min -Motor power: 0.37 kW/59 rpm -Belt width: 390 mm -Length: 2050 mm -with driver: 325 x 150 mm -Transport dimensions: 2100/800/H570 mm Kodpfjc S Nc Tex Afdedk -Weight: 160 kg

Condition: used, Swing loader, rotating and tipping frame, lifting tipper, forklift tipping container, tipping container, tipping skip, tipping device for loading trolleys, loading trolleys -Handover: in its current condition as inspected Kdodpfx Afoupbdysdek -Status: cannot be tested because no software has been programmed. -Tipping device: made of stainless steel -Ejection height: approx. 1600 mm -Use: for bakery products or the food industry -Individual components/dimensions: see photos, roller spacing 1640 mm -Dimensions: 2500/2000/H1720 mm -Weight: 1740 kg

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. Kedpfxoy Drife Afdjdk If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2026, condition: new, Our KVK 1S - Economic is our most economical way to purchase a semi-automatic stretch wrapper. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 600 kg, the model is sturdily built and designed for loads of up to 1500 kg. The KVK 1S Economic has a 1500 mm turntable and can wrap pallets up to 2250 mm high. With adjustable speeds of the turntable and film carriage, as well as the mechanical mechanical brake, you can easily adapt the automated wrapping to your product. Automatic recognition of your pallets is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rain-tight" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. Kdedpfx Aey Drg Dofdek The KVK 1S Economic is our recommendation if you want to switch from manual to automatic wrapping of your pallets with as little investment as possible. This machine is ideal for shippers with pallet volumes of up to approx. 10 pallets per working day For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer Kodpfx Afoxuqp Asdsdk -Handover: in its current condition as inspected -Note: Check the condition of the wheels -Heavy-duty transport wagon: Industrial trailer with single-axle steering -Beam spacing: 5860 mm / Height adjustable from 850 to 1255 mm -Load capacity: 11 t -Tires: 405/130-305 solid rubber dual tires -Overall dimensions: 7600 / 2000 / H 850 mm -Weight: 1080 kg

Condition: excellent (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 40 mm Kodpfx Afoxyf N Iododk -Transport width: 250 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 8x transport wheels available -Price: per piece -Dimensions: 395/70/H70 mm -Weight: 3.2 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Kdjdpfx Afjmhhypjdjk - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Ksdpfjmhh Dhex Afdedk When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm Kdjdpfx Afemhh Dzodsk - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm Ksdpsmhhx Isfx Afdsdk - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Kodpfxjmhhyaj Afdjdk Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.