Used Efco Maschinenbau Lapping Machine for sale (65,372)

Condition: used, functionality: fully functional, Complete valve grinding set for professional engine repair – packaged in three robust transport cases. Includes the actual valve grinding machine, a comprehensive set of valve seat cutters/reamers in various diameters, as well as collets and accessories (see photo – case opened). Ideal for engine repair shops, automotive specialists, boat engine/stationary engine service, classic car restoration, railway workshops, and industrial repair. The complete set is difficult to obtain individually and is therefore highly sought after. According to the equipment list (inventory no. 200004), the manufacturer is EFCO Maschinenbau GmbH, type Valval – please verify this on the nameplate on site. Test run/inspection possible at any time by appointment. Scope of delivery (3 transport cases): 1. Valve grinding machine (actual grinding unit) 2. Valve seat tools/cutter set 3. Collets, reamers, and accessories Technical data: - Power supply: 230 V (check on site) - Application: Valve grinding, valve seat machining, valve guide machining - Completeness: apparently complete according to the photo, please check against the original list on site Collection/transport: Kjdszachvjpfx Ab Iolu Self-collection by car/van (3 cases, each approx. 20-30 kg). Shipping via a freight forwarder is possible.

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2100 mm - 2 decks * Screen opening upperdeck: [] 18 mm. Klsdoywmpmepfx Ab Ieu * Screen opening lowerdeck: [] 8 mm. * Driving: 30 kW E-motor * Incl.: springs.

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2300 mm - 3 decks * Driving: 30 kW E-motor Ksdpfxoywmpgs Ab Iolu * Incl.: springs.

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Kledpfxezc Agkj Ab Iou Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: ready for operation (used), Lapping machine, Hahn & Kolb - LHD 0 - Machine from a state institution / original condition - Lapping disk diameter 400 mm - Max. workpiece height 120 mm - Max. distance between the cast lapping disks 80 mm - Speed range 40-80-160 rpm - Speed - drive motor 700/1400/2800 rpm - Total power 1.8 - 2.7 kW - Turning device - manually operated - Various lapping mandrels Kedpozbz Ttefx Ab Iolu - Documentation Dimensions: L x W x H 1.4 x 1.3 x 1.9 meters / Weight 1700 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, For sale is an Oerlikon bevel/worm gear unit of the E 37 EX 2 series, serial number 828499L01.1. The unit comes from a fully functional installation and is suitable for test benches, special purpose machines, and industrial drive applications. Technical specifications (general): Manufacturer: Oerlikon Type: E 37 EX 2 Design: Bevel/worm gear unit Kledeypb Iyepfx Ab Iou Application: Test bench technology, mechanical engineering, industrial drives Condition: used, functional

Condition: good (used), Lapping wheel diameter 500 mm Inner diameter of dressing rings 230 mm Speed of lapping wheel 0-100 rpm Kledjg Smwhepfx Ab Isu Working pressure 0-400 kg MARCELS MASCHINEN CH

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Klodpfx Abetxitvs Iju Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2001, table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- Klsdott Tb Depfx Ab Iju axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: ready for operation (used), Used bevel gear lapping machine Klsdpfxjycc Rie Ab Iju Manufacturer: Oerlikon Model: SL 2 The machine is available for immediate collection.

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Stroke 400 mm Klodpfx Abewgm Saj Ieu Weight 800 kg Tools

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Speed of the working disc 45/70/90/140 rpm Main drive performance 4.0 kW Connection 400V/50Hz Emergency stop switch Kjdpfx Aboh Invre Islu Conventional control with control panel Full-fledged lapping machine, conventional control

Condition: good (used), Year of construction: 2018, functionality: fully functional, disc diameter: 1,600 mm, Single-disc fine grinding or polishing machine For large components Workpiece holder Ø 1600 mm Tool Ø 500 mm to 525 mm, can be fitted with various fine grinding or polishing pads Control S7 with HDMI KSM tank 50 liters Polishing agent circulation system 50 liters Kjdpfjwrpclsx Ab Ijlu Main drive 11 KW

Condition: excellent (used), Year of construction: 2005, operating hours: 23,900 h, functionality: fully functional, machine/vehicle number: 503982, STAEHLI DLM-705 FLAT LAPPING MACHINE Country of origin: CH Dimensions: 3300x1970x2600 mm Net machine weight: 8000 kg TECHNICAL SPECIFICATIONS Outer diameter of lapping plates: 705 mm Number of satellites: 4-8 Distance between lapping plates: < 390 mm Programmable working pressure for parts to be machined: 0-200 daN Stop precision: 0.1 µm Programmable rotational speed for the lapping plates Flat honing and micro-finishing: 0-250, 300, 400, 600 min⁻¹ Central drive: 0-125, 220 min⁻¹ Machining accuracy: 0.1 µm Kedpjw Uc Hnjfx Ab Iolu Subject to errors or omissions; technical data is provided without guarantee.

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Type: AC brake motor 2 positions Klodpew T Tpdjfx Ab Ieu Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.

Condition: used, Year of construction: 1974, table diameter mm workpiece height mm Kedpfx Ajub Alzeb Islu number of wheels 2 total power requirement 8 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 1975, table diameter mm workpiece height mm Ksdjub Al Iopfx Ab Ijlu number of wheels 2 total power requirement 11 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 1983, table diameter 1000 mm workpiece height 25 mm number of wheels 1 total power requirement kW Klodpfst Hw H Sjx Ab Iju weight of the machine ca. t dimensions of the machine ca. m

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( 2 Bıçak), - Conforms to CE standards. - Possibility of lapping the middle register connections of PVC and aluminum profiles. - Up to 30 degrees at different angles, possibility of lapping the middle register connections of profiles - Pneumatic profile clamping system B7ull38nwa - Ability to move the milling motor with a pneumatic cylinder. - Easy series change thanks to the separator button (60-70) OPTION - Hydro check system - Cooling System Klsdpfxeq U S Ahj Ab Iju

Condition: excellent (used), FARO Prime 3D coordinate measuring arm Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 09/10/2013 Calibration date according to certification: 06/25/2015 Made in Switzerland Mobile 3D measuring arm for industrial metrology, quality assurance, component inspection, reverse engineering, tool and mold making, jig and fixture construction, and production control. Technical data Measuring range: approx. 1.8 m / 6 ft Axes: 6 Single Point Accuracy: 0.019 mm Kjdpfozc Erpex Ab Ielu Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Revision: 28.1 Bluetooth wireless technology USB interface Integrated battery operation Temperature compensation Portable CMM measuring arm technology Compatible with multiple probe systems Weight measuring arm: approx. 9.3 kg Total weight incl. case and accessories: approx. 35 - 50 kg Equipment / Scope of delivery FARO Prime measuring arm Transport case HP EliteBook laptop Reference sphere / Calibration sphere Base plate / Mounting plate Measuring probes / Probe set Software data carrier USB dongle Operating instructions / Manuals Other accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: like new (used), functionality: fully functional, overall weight: 1,100 kg, total length: 5,200 mm, total width: 1,500 mm, total height: 1,500 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, year of last overhaul: 2026, The machine is in very good condition and ready for operation. The equipment is used for packaging products such as: - carrots, - parsley, - beets, - cucumbers, - zucchini, - leeks, - celery, - peppers, - Chinese cabbage, - lettuce, - broccoli, - cauliflower, Ksdszfyaxepfx Ab Ijlu - bunches of vegetables and herbs. Technical specifications: - Maximum output: up to 50 cycles/min - Maximum product length: 650 mm - Maximum product width: 300 mm - Maximum product height: 240 mm - Sealing jaw width: 345 mm - Maximum film width: 800 mm - Maximum film roll diameter: 350 mm - Electrical power supply: 220–480 V, 50/60 Hz - Installed power: 5 kVA - Required compressed air: 6 bar - Compressed air consumption: 200 l/min - Machine weight: approximately 1100 kg Equipment and features: - Box Motion sealing system - Automatic package length adjustment - "No Product – No Bag" function - Automatic detection of incorrectly placed product - Electronic temperature control for sealing - Drive system with 3 AC motors - Compatibility with printers, labelers, and MAP systems - Stainless steel construction

Condition: like new (used), functionality: fully functional, cutting length (max.): 600 mm, cutting width (max.): 410 mm, The machine is in very good condition – like new. Equipped with a vertical heating element and sealing jaws for packaging in PE (polyethylene) film – a complete set of jaws for laminates is available. Forming tube for packages with a width of 350 mm – other sizes are available. Technical data for ILAPAK Vegatronic 4000 VFFS: ▪️ Output: up to 140 packages/min ▪️ Machine type: Continuous Film Motion ▪️ Type: VFFS – Vertical Form Fill Seal Bag size: ▪️ Minimum width: 70 mm ▪️ Maximum width: 410 mm ▪️ Maximum length: 600 mm Supported films: ▪️ Heat-sealable films ▪️ Polypropylene (PP) ▪️ Laminates ▪️ PE (polyethylene) film Film roll: ▪️ Maximum roll width: 880 mm ▪️ Maximum outer diameter: 550 mm ▪️ Core diameter: 76 mm ▪️ Maximum roll weight: 100 kg Power supply: ▪️ 400 V ±5% Kedpfxjy Tqybe Ab Iolu ▪️ 3 phases + neutral ▪️ 50 Hz ▪️ 7.5 kW Compressed air: ▪️ 7 bar ▪️ 350–900 Nl/min Control: ▪️ Industrial PC ▪️ 8.4” touch panel ▪️ Memory for up to 100 programs Construction: ▪️ Stainless steel ▪️ Hygienic Open Frame design ▪️ Quick bag size changeover ▪️ Film centering ▪️ Servo drives Machine dimensions: ▪️ 1478 × 2336 × 1550 mm Weight: ▪️ Approx. 1500 kg

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 1,945 mm, total height: 1,375 mm, total width: 1,206 mm, input voltage: 400 V, overall weight: 600 kg, year of last overhaul: 2026, roll width: 580 mm, air pressure: 6 bar, film width: 580 mm, Equipment: CE marking, Vertical Packaging Machine Ilapak Vegatronic 500 VT500 The machine is in very good condition and ready for operation. - Maximum package width: 270 mm - Minimum package width: 50 mm - Maximum package length: 350 mm - Maximum film width: 580 mm - Sealing jaw width: 300 mm - Sealing jaw type: constant heat - Control: PLC, HMI Omron - Memory: 40 programs - Power supply voltage: 400V AC Kodpfx Aeyw Ud Sjb Ielu - Output up to 100 pcs/min - Machine dimensions: 1206x1945x1375 mm - Machine weight: 600 kg - Possible integration with weigher, printer

Condition: like new (used), functionality: fully functional, type of input current: three-phase, total length: 5,000 mm, total height: 2,400 mm, total width: 1,500 mm, overall weight: 1,200 kg, year of last overhaul: 2025, product height (max.): 120 mm, product height (min.): 10 mm, product length (max.): 550 mm, product length (min.): 50 mm, Ilapak Carrera 2000 PC Horizontal Flowpack Packaging Machine, machine in excellent condition – like new. The machine has undergone a complete overhaul, which I performed personally. I worked as an Ilapak service technician, so the machine has been fully restored to factory condition. It is tested, in excellent working order, and ready for immediate operation. Machine specifications: - Machine speed up to 100 cycles per minute Klsdpfxoxw Ilao Ab Iou - Sealing jaw length: 250 mm, brand new straight knife - Servo motors on each axis - Permissible product dimensions: length: 50–550 mm, width: 20–230 mm, height: up to 120 mm - Fixed forming box - Maximum film roll length: 630 mm - NPNB system (No product no bag) - Sensor for operation with printed film - Total machine length: 5 m, width: 1.3 m, height: 2.4 m - Weight: 1,200 kg Additional installed equipment: - ICE ZODIAC Videojet Datflex 53 mm thermal transfer printer - HERMA H400 16R labeller Possibility to customise the machine for packing specific products.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, Vertical Packaging Machine Ilapak Vegatronic 1000 VT1000 Kjdpjx Nbwvefx Ab Ijlu The machine is in very good condition and ready for operation. - Maximum package width: 380 mm - Minimum package width: 50 mm - Maximum package length: 380 mm - Maximum film width: 780 mm - Sealing jaw width: 400 mm - Sealing jaw type: constant heat - Jaw drive: ABB servomotor - Control: PLC, HMI Omron - Memory: 40 programs - Supply voltage: 400V AC - Output up to 100 pcs/min - Machine dimensions: 1280x2325x1285 mm - Machine weight: 800 kg - Option to integrate with weigher, printer