Used Eigenfertigung Feet Stelts Supports for sale (14,300)

Condition: new, Supports for conveyor belt or roller conveyor RA2004 Feet adjustable or made according to measure +/- 50-100 mm height adjustable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Predpfx Anek Abthoyjb For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Predpfern Sqhex Anyob Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: new, Year of construction: 2020, functionality: fully functional, conveyor belt length: 4,400 mm, conveyor belt width: 1,200 mm, conveyor belt speed: 100 mm/s, total length: 4,700 mm, total width: 1,450 mm, total height: 950 mm, discharge height: 950 mm, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: SEW, Equipment: documentation/manual, type plate available, Continuous flow conveyor, accumulating type, linking conveyor between 2 stations -- Unused, from a project that was not realized -- System description ALTRATEC and technical data: This transfer system is preferably used in series production for material flow management and for loosely linking manual/automatic workstations and manual/automatic work stations using workpiece carriers (WPC). The workpiece carriers are transported according to the accumulating roller principle. On the sections between the various workstations, the workpiece carriers can be buffered. In the upper and lower sections, the workpiece carriers can be stopped as required. In the area of the deflection points, the transport takes place with positive engagement. At the manual workstations or automatic stations, the WPCs are stopped, and if necessary, pre-separated and positioned. The end workpiece carrier deflection points must be secured against manual intervention in the area of manual workstations by means of protective devices. In the area of automatic handling devices, these are generally secured with the protective device of the handling device. At the end of the section, the WPCs must be checked for their loading status. Only empty WPCs may be released for circulation into the return section. Technical data: - Conveying medium: Accumulating conveyor with accumulating roller chain on both sides, - Conveying speed: Accumulating conveyor approx. 6 m/min, - Overall length: Accumulating conveyor approx. 4,400 mm, - Overall length, including deflection radii: approx. 4,700 mm, - Overall width: Conveying system without motor approx. 1,200 mm, - Overall width: Conveying system with motor approx. 1,450 mm, - Transport height: Top of WPC approx. 950 mm, adjustable by +- 30 mm, - Support system: ALTRAPROFIL, - Workpiece carriers (WPC) Length: Basic workpiece carrier 220 mm, Width: 1,050 mm, Number: 17 x on top and 1 x on the bottom, Weight: Including basic WPC/workpiece holder with holders and component complete, max. 50 kg / per WPC, - Positioning accuracy: Loading, automatically +/- 0.15 mm on the WPC, - Positioning accuracy: Unloading, automatically +/- 0.15 mm on the WPC Electrical equipment - Motor: Accumulating conveyor 400 V, 50 Hz / SEW with Harting connector, - ProfiNet - Sensors for singulator/stopper, WPC query M12 / M18 – IPF electronic, light barriers for workpiece detection - Electrical and pneumatic installation: On E/A modules ET200, on valve manifold CPV14… Psdpfx Anoz Hklfoyorb Mechanical equipment: - 1 piece conveying section, approx. 4,400 mm long, consisting of conveying profiles, including steel supports for accumulating roller chain in ALTRATEC standard design, with automatic and bilateral queried spring tension. Two Vulkollan rollers on the chain tension side – when starting up. - 4 pieces of heavy-duty supports made of ALTRAPROFIL with adjustable feet, foundation mounting angles without dowels, for a conveying height of approx. 950 mm (top of WPC), - 6 pieces of stopping station with 2 singulators/stoppers each, lightweight design, arranged in parallel, pneumatically operated, closed and single-acting when not activated. Both positions are queried. Design with integrated backstop in 2 x, - 1 piece of permanent chain lubrication. Perma Classic with two lubrication points integrated into the longitudinal profiles, - 10 pieces of WPC queries on the conveying section, 2 pieces of component checks as a light barrier with reflector.

Condition: used, Year of construction: 1998, operating hours: 26,000 h, machine/vehicle number: LC670, Tetra Pak TBA 19 V10 complete filling lineTechnical Specifications & Performance DataThe Tetra Pak Tetra Brik Aseptic is a used bottling line filling machine for aseptic carton packaging. Built approximately in 1998, this industrial packaging machine is configured for 125 ml Slim Brik containers. Its vertical packaging-web handling arrangement supports the forming, filling and sealing stages required for compact carton packs in dairy product production.Manufacturer: Tetra PakMachine identification: Tetra Brik AsepticApproximate year of manufacture: 1998Machine Hours: 26.000 HoursContainer type: Brik cartonFormat: 125 ml SlimProduct application: Dairy productsFilling technology: Aseptic carton fillingAdvanced Automation & Control SystemsThe machine is equipped with an operator control panel and an electrical/control cabinet for managing operating functions. Visible pneumatic lines, mechanical drive assemblies and adjustable mechanisms indicate an integrated automation layout for web transport, carton formation and package handling. Aseptic carton filling equipment of this type is designed to coordinate film registration, forming and sealing operations through a controlled production sequence.The machine includes accessible service areas, adjustment points and an elevated operator platform to support routine operation and format-related setup activities.Production Line Integration CapabilitiesThis Tetra Pak filling machine is suited to operation as the primary filling and forming unit within an aseptic carton packaging section for dairy products. It can be integrated with upstream product preparation and sterile product supply systems, as well as downstream carton conveyors, accumulation systems, coding equipment and secondary packaging machinery. The lower discharge and product-handling section supports transfer of filled Brik packs toward the next stage of the production line.Machine typeManufacturer / modelYearFilling MachineTetra Pak Tetra Brik Aseptic1998The 125 ml Slim configuration makes this second hand aseptic filling machine relevant for beverage production and dairy packaging operations requiring compact carton formats. Integration should be planned around compatible carton conveying, downstream packing equipment and the process utilities required by the wider aseptic packaging installation.Machine Condition & Maintenance HistoryThe machine is offered as used industrial packaging equipment and is classified as ready for operation. Its stainless-steel enclosure, access panels, service platform, guardrails, access ladder and adjustable leveling feet are visible. Buyers can assess the equipment within the context of t... Prsdpfxsz E Dg Tj Anyob

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: Predpfezzf Rujx Anyob - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Condition: used, Capacity: 2200l, equipment: heating/cooling jacket, large manway cover in the upper tank section, motorized drive unit, separate stainless steel power unit with electric motor, several connections, bottom product outlet at the tank base, piping and process connections on the top section and jacket, stainless steel support frame with height-adjustable feet, an on-site inspection is possible. Prodpfx Aez Eudponyjb

Condition: used, 2 Cast iron V supports Width: 1400 mm Height: 1370 mm Base depth: 750 mm Slot width: 200 mm V width: 940 mm V depth: 430 mm Total height under sole: 1470 mm Pjdpfxjzy Ewlo Anyorb Weight: 2,3 T / unit Ideal for positioning large rotors

Condition: used, Year of construction: 2023, operating hours: 39 h, Putzmeister SP 25 DQR Mortar Machine and more, 39 operating hours, like new!! SP 25 DQR: High performance for versatile applications. In addition to classic interior and exterior plastering applications, the powerful SP 25 DQR screw pump with forced mixer is suitable for a variety of other special applications, such as concrete repairs or filling and grouting work. The focus of the increased performance is on larger processing volumes, as well as higher delivery rates and pressures. Multi-component materials and ready-mix dry mortars can be mixed on site in the powerful forced mixer with any desired mixing time. The lifting function of the mixer enables a low filling height and allows the easy transfer of the mixed batch into the feed hopper. Main features: * Robust design - proven in construction site use and on the test track * Large lifting mixer with a volume of 240 liters allows the mixing of larger quantities of material/containers * Lower filling height simplifies filling and cleaning of the mixer * Central control panel with intuitive keypad and clear display * Larger tank for maximum operating time without refueling * Support feet for the best stability on the construction site * Robust plastic hood according to the highest quality standard * Safe relocation of the machine with a crane - thanks to the integrated crane eye Description: High performance for versatile applications. In addition to classic interior and exterior plastering applications, the powerful screw pump with forced mixer is suitable for a variety of other special applications, such as concrete repairs or filling and grouting work. The focus of the increased performance is on larger processing volumes, as well as higher delivery rates and pressures. Multi-component materials and ready-mix dry mortars can be mixed on site in the powerful forced mixer with any desired mixing time. The lifting function of the mixer enables a low filling height and allows the easy transfer of the mixed batch into the feed hopper. Robust plastic hood according to the highest quality standard. Central control panel with intuitive keypad and clear display. Robust design - proven in construction site use and on the test track. Support feet for the best stability on the construction site. Safe relocation of the machine with a crane - thanks to the integrated crane eye. Large lifting mixer with a volume of 240 liters allows the mixing of larger quantities of material/containers. Lower filling height simplifies filling and cleaning of the mixer. Larger tank for maximum operating time without refueling. Technology with screw Fluid for mortar. Operation: Diesel-powered. Installation: Mobile. Application area: Industry. Application: Mixing. Protection level: Robust. Other features: Tank, construction site. Throughput: Max: 4.5 m³/h. Min: 0.3 m³/h. Pressure: 35 bar. Delivery height: 50 m, 70 m. Power: 28 kW. Length: 4,280 mm. Width: 1,410 mm. Height: 1,480 mm. Weight: 1,050 kg. Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make changes and sell the item prior to sale! Prsdpfx Anoz Hd Eloyeb

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Parabolic suspension +100km/h, ramp, aluminum floor Equipment: - Aluminum floor - Loading flap - 10x lashing eyes - Loading angle 20° Net: €7,703.36 / Gross: €9,167.00 Article number: ILF335401791.12 Technical data: • Brand: Hapert Trailers • Model: Indigo LF-3 Pjdpfxezu N Nze Anyorb • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 405 x 179 x 19 cm • External dimensions (LxWxH): 589 x 238 x 145 cm • Loading height of the floor: 42 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,101 kg • Payload: 2,399 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/50R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic • 100km/h approval: Yes DESCRIPTION • 3x parabolic spring axles, each 1,800kg • Robust steel fenders, walkable • 4x HAPERT Safety Steps (non-slip surface) • Grid grating step plates on the rear side • Aluminum profile floor • Very stable steel frame, welded • Frame completely hot-dip galvanized • 1x continuous loading flap in 150cm length mounted on a shaft, instead of a 120cm ramp • Length of loading flap: 150cm • Loading angle: 13° • Stable eccentric locks • Corner posts with locks for the rear flap, can be removed without tools • Option to insert at all 4 corners for tarpaulin frames, grating extensions, side extensions or front wall extensions • Robust support feet on the loading flap • Lifting aid for the loading flap • Very low chassis for a low loading angle • Optionally with bucket storage • 10x lashing eyes recessed in the side of the frame profile (1000dAN/kg), TÜV certified • Hole railing three-sided 6cm (Combi Protect Rail), can also be used with locking bars and lashing straps - round holes 25mm, oblong holes 54x25mm • Parabolic spring axle from KNOTT • Reverse driving automatic • KNOTT overrun device and parking brake • Very stable bolted V-drawbar, REINFORCED • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any desired features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: used, of stainless steel, no feet mit 2 Stück VA- Ablasshähne Technical data: Volume (liter): 100 Diameter (cm): 35 Height with feeds (cm): 77 Tank type: Storage tank Psdpfoz Ad Nljx Anyerb Material: Stainless steel V2A AISI 304 x Support: Stationary Temperature control: no

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Pedpfx Anszd Riusyerb Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, total length: 16,240 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, 2 Abus overhead cranes – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2012 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m/M5 Dimensions – Span: 16,240 mm center-to-center – Installation height: 560 mm – Wheelset width including bumpers: 3,210 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Dead weight: 3,690 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired push-button panel with load display – Crane manual available: yes – Last maintenance: May 2026 – Condition: in good condition, dismantled but operational – Dismantled: no; October 2026 – 2 units available Steel structure including floor slabs and column-mounted slewing crane – Length: 32.5 m (approx.) – Year of construction: 2012 – Condition: in good condition – Dismantled: no; October 2026 Dimensions – Total length: 32.5 m (approx.) – Width (center-to-center) of crane runway: 16,240 mm – Total width: 16.7 m (approx.) – Distance from floor to top of 50×30 mm beam: 6,200 mm (approx.) – Column spacing: to be confirmed – Crane runway: HEA 260 – Columns: HEA 260 Predpfez Eruljx Anyeb – Crane beam: 50×30 mm Includes – 16 x HEA 260 columns, height approx. 5,914 mm – Cross-braces – Floor slab measuring approx. 4.5 x 16 m – Floor slab measuring approx. 4.0 x 6 m – Column-mounted slewing crane with a lifting capacity of 1.6 tonnes

Condition: used, Year of construction: 1999, Technical details: Pjdpfxou Ixzbo Anysrb turning diameter over bed: 460 mm turning diameter over support: 388 mm turning length: 1016 mm centre distance: 1016 mm center height measured in bed: 230 mm turning dia. in gap: 640 mm spindle bore of work spindle: 52 mm range of revolution per miute: 30 - 2000 / 12 step U/min feeds:: längs: 0,032 - 0,898 mm/U feeds:: plan: 0,016 - 0,449 mm/U tailstock quill taper MT: 4 tailstock quill adjustment:: 120 mm total power requirement: 3,75 kW weight of the machine ca.: 1,6 t dimension machine xH: 2,1 x 1,1 x 1,5 m Switchable gearbox Quantum 3-way length measuring system Top slide adjustment +/-90° Multifix quick-change steel holder 3-jaw chuck Ø 200mm rotating center in tailstock Threads: Inch thread; Metric thread; Trapezoidal thread; Module thread Accessories: Change gears, machine feet, 1x fixed quill tip *

Condition: used, Year of construction: 1992, Lippert rising falling Incline belt conveyor GF 720+11450+850-750-600 RA2263 Technical data: Conveyor length (NL): 13020 mm ( 850 mm forerun + 11450 mm ascending belt + 720 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Podortalnspfx Anyerb Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1992, Lippert belt conveyor GF 19530-750-600 RA2268 Psdpfxjrtu A Ss Anysrb Technical data: Conveyor length (NL): 19530 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm Rising falling Incline belt conveyor with leading belt GF 4600+3300-600-600 RA2202 Technical data: Conveyor length (NL): 7900 mm ( 4600 mm riser segment + 3300 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Psdpfx Ansq I Tyxeyerb Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Prjdpfjrixi Nex Anyob Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm conveyor belt GF 8500 -600-500 RA2088 Technical data: Conveyor length (NL): 8500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Predpfen Tpvvsx Anyeb Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm conveyor belt GF 19480-600-500 RA2107 Technical data: Conveyor length (NL): 19480 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Prsdpfopdv N Njx Anyeb Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert rising falling Incline belt conveyor GF 800+6450+5550-750-600 RA2128 Technical data: Conveyor length (NL): 12800 mm ( 800 mm forward run 6540 mm ascending belt + 5550 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Prjdsrudbuopfx Anyeb We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Lippert rising falling Incline belt conveyor GF 800+10500+2730-750-600 RA2132 Technical data: Predpfx Anorudbxoyeb Conveyor length (NL): 14030 mm ( 800 mm forward run + 10500 mm ascending belt + 2730 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch and forerun belt conveyor GF 7600-700-600 RA2101 Technical data: Conveyor length (NL): 7600 mm (800 mm forerun + 6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Podpfsq Scqfox Anyorb Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm conveyor belt GF 16650-700-600 RA2178 Technical data: Conveyor length (NL): 16650 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Prjdpjq H Ik Uofx Anyob With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor with leading belt GF 3200+6000+2500-700-600 RA2156 Technical data: Conveyor length (NL): 11700 mm ( 3200 mm arch + 6000 mm riser segment + 2500 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DT90S4/BMG/TH Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Podpoq Izpnofx Anyjrb For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline belt conveyor GF 6000+3800-700-600 RA2199 Technical data: Conveyor length (NL): 9800 mm ( 6000 mm + 3800 mm ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Prsdpfeq Imunsx Anyeb For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics