Used Elektror Ds 45/B5/S597 for sale (12,261)

Condition: used, Three-phase motor, electric motor -Voltage: 220/380 V -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 14/30 mm -Construction: B5 -Dimensions: 310/195/H160 mm Nodpfx Aod Sp Ixsbzocw -Weight: 12 kg

Condition: new, Siemens Teleperm M 6DS1700-8BA E1 with C79458-L442-B5, unused, 100% functional, in opened original packaging Ncjdsxahxlopfx Abzjw

Condition: ready for operation (used), Brother B521169-3 circuit board from a Brother TC-321, serial number as shown in the photo, used, in good condition, 100% functional. Ncsdpfji D Ulkox Abzsw

Condition: new, Siemens Teleperm M 6DS1144-8AA E2 with C79458-L436-B540, unused, 100% functional, in opened original packaging Nsdoxahwnjpfx Abzocw

Condition: ready for operation (used), Bürkert SC00015-6U F03F05-N-DS-11 AU Pneumatic rotary actuator 214529, coil voltage 24 VDC, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of supply as shown in the photos. Ncsdpfx Aoi D Ul Djbzew

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Fliegl 45 ft Container Chassis Tailor-Made Transport Solution Ncodpfozlkiwjx Abzjw Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example. Production and equipment are customized to customer specifications. Chassis High-strength fine-grain steel welded chassis Fifth wheel with replaceable 2" kingpin and two kingpin positions Container locking system for: Rear extension retracted: 1 × 20 ft container (flush with rear, reduced kingpin load) Rear extension – Position 1: 1 × 30 ft, 2 × 20 ft, or 1 × 40 ft container with gooseneck tunnel Rear extension – Position 2: 1 × 45 ft container with gooseneck tunnel and rear overhang No rear height adjustment and no folding center supports; containers without a gooseneck tunnel cannot be transported Front locking adapter for securing containers without a tunnel from below, including storage bracket Roller-mounted rear extension with manual crank 24 t two-speed landing gear, single-side operation Two wheel chocks with holders Aluminium side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45 ft containers Half-shell mudguards EC-compliant anti-spray mud flaps Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-aligned axle and suspension system for reduced tire wear and lower fuel consumption Offset axle spacing for combined transport (GCW up to 44 t) Air suspension Automatic lift axle on the 1st axle with forced lowering and traction aid (activated by braking three times). Traction aid operates up to 30% axle overload and a maximum speed of 25 km/h. Braking System Dual-line pneumatic braking system Color-coded air lines for easier servicing Spring parking brake Two interchangeable coupling heads at the front (without connecting hoses) Electronic Braking System (EBS) with front EBS socket (without connecting cable) Trailer may only be operated with towing vehicles supporting ABS functionality Raise & lower valve Vehicle Stability System (RSS) Axle load monitoring via EBS CAN bus for display in the truck cab (truck preparation required; not a calibrated weighing system) Wheels & Tires 385/55 R22.5 tires, manufacturer's choice Steel wheels, factory silver Electrical System 24 V electrical system Multi-chamber lights with LED tail and brake lights Yellow LED side marker lights (On certain tractor units, diagnostic messages may occur although all lighting functions correctly.) Two white front position lights Two red/white rear outline marker lights Two 7-pin front sockets (without connecting cables) Operating Information When transporting a 45 ft container with a short tunnel, with or without the front extension, the maximum permitted kingpin-to-rear-end dimension and the legal overall vehicle combination length of 16,500 mm are exceeded. The rear underrun protection must be extended manually. A special permit in accordance with §70 StVZO is required. Registration & Approval Registration country: Germany DEKRA approval and inspection certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder ECE R48 contour markings (white on the sides, red at the rear) Finish Hot-dip galvanized chassis including passivation 15-year anti-corrosion warranty Landing legs with black coating

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: SSB, gear motor from automatic saw, drill and mill Rapid DGL / BFA -Type: DSG-012 / 20-0410.208.40 - K1 - B5 -Gearbox: Type 012 i = 6.98 -Speed: 380/40 rpm -Power: 0.75 kW -Construction: B14 Hole circle: O 100 mm (O10 mm) - Shaft: O 20 x 40 mm Ncedpfogzwx Tsx Abzew -Protection class: IP 44 -Brake: 24 V 1.3 A. -Dimensions: 515/230 / H170 mm -Weight: 22 kg

Year of construction: 2021, condition: good (used), functionality: fully functional, machine/vehicle number: CD072150, Hosokawa Solids Container Scale BSG – Batch Discharge Scale – Year of Construction 2021 Ncodezim D Sjpfx Abzow For sale is a Hosokawa Solids container scale, type BSG, for the precise gravimetric batch dosing of powders and bulk materials. The system was manufactured in 2021 and is in very good used condition. It consists of the container scale with discharge, a stainless steel filter housing with cartridge filters, a weighing system, an Endress+Hauser level sensor, and Nord geared motors. An operating manual is available. The control system and switch cabinet are not included in the scope of supply. Technical Data Manufacturer: Hosokawa Solids Solutions GmbH Type: BSG Container Scale (Batch Discharge Scale) Year of Construction: 2021 Container Volume: 30 dm³ Container Tare Weight: approx. 75 kg Max. Product Temperature: 50 °C Max. Total Weight: approx. 150 kg gross The machine is suitable for the dosing of powders, granules, and other bulk materials in the plastics, chemical, food, and recycling industries. Inspection can be arranged at any time. Loading can be organized.

Condition: ready for operation (used), Siemens C79458-L2317-A1 Sicomp + C79458-L2320-A1 SN B5 058400, used, 100% functional Ncjdsxahnmepfx Abzjw

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Nedpji Rizujfx Abzocw Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! Ncedpfxoi Riwms Abzjw with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: good (used), machine/vehicle number: 3415, Year of construction: 2012, load capacity: 45,000 kg, lifting height: 15,300 mm, mast type: telescopic, total length: 11,500 mm, total width: 4,180 mm, operation weight: 72,000 kg, additional equipment features: NATO-socket, Hydraulic sliding cabin, Dual tread, Centralized greasing system, Automatic Greasing System for spreader and inner boom, Equipment: lighting, SMV 4531 TB5 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-25 Wheel size – Steering wheel: 18.00-25 Nodpfx Aeyuifwebzecw

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/T DT71D6/BMG/TH geared motor with a built-in 24 V DC electromagnetic brake. The unit is fully functional, tested, and ready for use. The technical condition is very good. The housing has normal signs of use in the form of minor scratches and abrasions, which do not affect the operation of the device. Technical data: Manufacturer: SEW-EURODRIVE Gearbox model: WA20/T Motor type: DT71D6/BMG/TH Power: 0.25 kW Supply: 3×230/400 V Δ/Y Ncedpfozn Npzsx Abzow Frequency: 50 Hz Rated current: 1.48 / 0.85 A Motor speed: 880 rpm Output speed: 45 rpm Torque: 37 Nm Gear ratio: i = 19.50 Protection class: IP54 Insulation class: F Brake: 24 V DC Braking torque: 5 Nm Weight: 11.66 kg

Condition: good (used), machine/vehicle number: 2925, Year of construction: 2006, load capacity: 45,000 kg, lifting height: 15,300 mm, mast type: telescopic, total length: 11,700 mm, total width: 4,170 mm, operation weight: 71,400 kg, additional equipment features: Dual tread, Fire extinguisher , Front mud guards, Hydraulic sliding cabin, Warning triangle, Centralized greasing system, Automatic Greasing System for spreader and inner boom, Equipment: lighting, SMV SC45-31 TB5 from Uniktruck Nsdpfx Aoyuhygobzecw Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-25 Wheel size – Steering wheel: 18.00-25

Condition: excellent (used), Year of construction: 2006, 45 linear meters of SSI Schäfer Palflex pallet racking, including shelf inserts Used item, in good condition, see photos Year of manufacture 2006 Height approx. 6.5 m Depth 120 cm Field load 12,000 kg Frame galvanized Beams red Shelf inserts included! 2 pieces of grating per 2.7-meter beam length Negotiable price: €7,490.00 net ex warehouse Offer includes: + 17 units of frames, pre-assembled, depth 120 cm, height approx. 6.5 m + 96 units of beams, length 2.7 m, 1500 kg load capacity per shelf with evenly distributed load + 192 units of safety locks + 96 units of galvanized shelf inserts for 48 levels, each 2.7 meters beam length + 68 units of concrete anchors + Load signs Item is in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Nedpskx E Ryjfx Abzjcw Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our general terms and conditions, all prices excl. VAT ex warehouse) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • Weekly 30-50 semi-trailer truckloads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND CORE BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission-based auction: Conducting auctions on commission. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you came across us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), For sale: a Mannesmann Demag geared motor with an angular gearbox, fully functional and ready for operation. The unit has been inspected and is in good technical condition. Normal signs of wear and tear resulting from use are visible. Technical data: Manufacturer: Mannesmann Demag Motor type: UMF71BX-6-7 Gearbox type: S040-B5-21-3 Motor power: 0.25 kW Nsdjzn Aamspfx Abzocw Power supply: 3×220/380 V Frequency: 50 Hz Motor speed: 890 rpm Output speed: 64 rpm Gear ratio: i = 14:1 Protection rating: IP54 Insulation class: B

Condition: excellent (used), For sale: Mannesmann Demag S040-B5-21-3 geared motor with a three-phase UMF71BX-6-Z motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good, with normal signs of wear and tear from use. The robust gearbox and reliable motor make this geared motor ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: Mannesmann Demag Gearbox type: S040-B5-21-3/ Motor type: UMF71BX-6-Z Motor power: 0.25 kW Njdpjznxa Aefx Abzscw Power supply: 3× 220/380 V, 50 Hz Motor speed: 890 rpm Output speed: approx. 64 rpm Gear ratio: i = 14 Current: 1.56 / 0.90 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Lubrication: synthetic oil Country of manufacture: Germany

Condition: excellent (used), For sale: a SEW-EURODRIVE RF43 DT71D4 geared motor with a three-phase motor with a power of 0.37 kW. The unit is fully functional, tested, and ready for operation. The technical condition is very good; visually, it has normal signs of use resulting from operation. The geared motor is equipped with a cylindrical gearbox with a B5 mounting flange, making it ideal for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: SEW-EURODRIVE Gearbox type: RF43 Motor type: DT71D4 Power: 0.37 kW Power supply: 3×220/380 V, 50 Hz Motor speed: 1380 rpm Output speed: 22 rpm Output torque: 137 Nm Design: IM B5 Protection class: IP54 Insulation class: B Power factor: cos φ 0.70 Ncedpfxjznv Hae Abzow

Condition: excellent (used), For sale: SEW-EURODRIVE SF31DT71D-4 geared motor with a three-phase motor, 0.37 kW. The unit is fully functional, tested, and ready for operation. The technical condition is very good, and it shows normal signs of use, with some localized paint wear on the fan cover. The robust worm gear ensures quiet operation and reliability, making this geared motor ideal for driving conveyors, feeders, production machines, packaging machines, and other industrial equipment. Nedjznv Dlopfx Abzocw Technical data: Manufacturer: SEW-EURODRIVE Type: SF31DT71D-4 Power: 0.37 kW Power supply: 3×220/380 V, 50 Hz Motor speed: 1380 rpm Output speed: 67 rpm Output torque: 39 Nm Design: B5/A Protection class: IP54 Insulation class: B Weight: 13.69 kg

Condition: excellent (used), For sale: SEW-EURODRIVE WA20 DR63L4 geared motor with a three-phase electric motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. Normal signs of wear and tear resulting from use are visible. Thanks to its robust construction, the geared motor is ideal for driving conveyors, feeders, production machines, and other industrial equipment. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: WA20 Motor type: DR63L4 Power: 0.25 kW Power supply: 3×220–240 V Δ / 380–415 V Y, 50 Hz Motor speed: 1300 rpm Output speed: 27 rpm Gear ratio: i = 48.00 Output torque: 45 Nm Protection class: IP54 Insulation class: B Nedpfx Aoznuqqobzecw Operating mode: S1 Weight: 8.8 kg

Condition: excellent (used), Catalogue number 7953 TECHNICAL DATA - Roller width: 510mm - 3-knife roller - Roller guard - Table length: 2550mm Ncedpfx Abozmhb Tjzsw - Cast iron tables - Both tables adjustable - Original angle-adjustable fence - Motor: 4kW - Brake - Extraction port diameter: 135mm - Dimensions (L/W/H): 2600x1500x1100mm - Weight: 830kg ADVANTAGES – Made in Poland, ŻEFAM brand – 3-knife roller – Brake – Used jointer, in very good condition Net price: 7,900 PLN Net price: 1,880 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: ready for operation (used), Bosch SD-B5.380-012-01.000, brushless, permanent magnet synchronous servomotor, serial number: 545000096, used, shows normal signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Nedpfji D Hbhjx Abzecw

Condition: ready for operation (used), Bosch 1070068008-102 Servo i Module Circuit Board, Serial Number: 001453948, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Ncedpfx Aoi D T S Iobzew

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 controller, serial number: 234547768256008, professionally and completely refurbished and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Nodpfsi Ebhlex Abzocw

Condition: ready for operation (used), Brother B521104-2 circuit board from a Brother TC-321, used, in good condition, 100% functional. Ncsdpfx Absi D Uk Hjzsw