Used Elkom Est 21 for sale (10,163)

Year of construction: 2008, condition: excellent (used), Electric heating rod Shock- and impact-resistant heating insert system with heating conductors embedded in silicone for airtight sealing. No wear, no corrosion, reliable operation even in continuous operation and under shocks and vibrations. Temperature setting via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressure surfaces on all sides. Standard gold-anodized finish, scratch- and abrasion-resistant, easy to clean. Size: Type: EST 21 Length: 2100 mm Connection value: 1100 watts, 230 volts Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Kdodpfx Aslcd Szsg Asu Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. Kdedpfevvlyisx Ag Aeu • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: excellent (used), Year of construction: 2016, load capacity: 210 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC4, The KUKA KR 210 robot is a 6-axis robot arm, it has a payload of 210 kg and a reach of 2700 mm. Common applications of the KUKA KR 240 include: Additive Manufacturing, Assembly, Dispensing, Finishing, Material Handling, Palletizing. Model: KR 210 R2700 PRIME Axes: 6 Payload: 210 kg Reach: 2700 mm Repeatability: 0.03 & 0.05 mm Model Year: 2016 Controller Cabinet: KRC4 Condition: Used& Tested & Position Repeability Test Provided Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website) Kodsw S Idmepfx Ag Asdu

Condition: excellent (used), Wolpert DIA TESTOR 7521 Ksdpsx N Rw Eofx Ag Aedu

Condition: used, Year of construction: 2007, functionality: fully functional, load capacity: 210 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, This system is equipped with a KUKA KRC2 ed05 control unit and features the KR 210-2 2000 robot model. The robot offers a payload capacity of 210 kg and a reach of 2700 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Kdodpfxjw H Nuqo Ag Aju Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 KRC2 ED05 Payload: 210kg Arm Reach: 2700 mm or 3100 mm Condition: Used and tested Year: 2005 (Multiple Options Available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2008 (Multiple Options Available) Controller Cabinet: KRC2 ed05 Kjdpfoq Hfahex Ag Ajdu Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Kdsdpfxew I U Eco Ag Asu Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: used, Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the fields of research and development. It thus provides an excellent addition to the existing FTIR series, which covers, among other things, the standard laboratory area. AIM-8800 specifications Optics: 15x Cassegrain objective 15x Cassegrain condenser mirror with inlet for purging MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm-1 Type 2 - 5000 - 650 cm-1 Electrically activated aperture XYΘ directional drive. The adjustment of the XY directional increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum adjustment value: 3 µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30 mm Resolution: 1 µm distance Sample thickness: Reflection mode - ≤ 40 mm Transmission mode - ≤ 10 mm Operation via the keyboard of the main unit Selection of the measurement mode / XY stage operation (speed control in 4 steps) / manual focusing / illumination control (Optional) Control via PC Selection of the measurement mode / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture adjustment / aperture preview / measurement position and recording of the aperture setting (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: Kdjdpfezdyyiex Ag Asu W410mm x D540 mm x H520 mm x 36kg Condition: used Scope of supply: (See picture) (Changes and errors in technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Hydraulic press brake PBO-2563-N Estun E21 Specifications - Maximum bending thickness (S235): up to 4.0 mm - Nominal bending force: 630 kN - Maximum bending length: 2500 mm - Throat depth: 250 mm - Maximum stroke: 120 mm - Daylight: 370 mm - Distance between side frames: 2000 mm - Backgauge travel distance: 600 mm - Motor power output: 5.5 kW - Length: 2600 mm - Width: 1400 mm - Height: 2200 mm - Weight: 3700.0 kg Tools Front supports: 2 pcs. Backgauge drive (travel along the X-axis): electric motor Ram drive (travel along the Y-axis): electric motor Punch quick change tooling system form AMADA E21 control (mounted on a swivel arm) Manages the movement along the X axis (backgauge) and Y-axis (ram). Allows to create up to 40 programs Each program can consist of up to 25 steps Intuitive operation using English abbreviations explained throughout the training course. It is a sophisticated but easy-to-use controller that allows operation in three modes: Full manual Kdjdpfx Agjh Rands Aeu Semi automatic Hands-free cycle mode Top quality components Rexroth hydraulic valve Schneider electrical components Omron and Schneider safety circuit parts. Steel hydraulic line tubings Hydraulic lines made of steel instead of rubber reduce the risk of future leaks. Safety We attach great importance to the safety of our Clients and their employees; therefore our press brakes are equipped with visible safety labels, side guards, rear safety doors, easily accessible safety switches and light curtains that protect the operator against inserting their hands between the upper and lower dies. The machines comes with carefully prepared instructions manual. The machine has a CE marking and EU declaration of conformity. Oil cooling system The Oil Cooling System guarantees the stability of the machine's performance even after long, continuous operation. Within the service, our technicians may: Specify the bending steps for intricate parts. Advise on material and gas selection Assist in the selection of operating parameters for different materials Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour Kjdpfx Agjz D Uuxs Asdu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Espec Type: EHS-221MD Kdsdpfx Aszfy N Tsg Aou External dimensions: W x H x D: 860 x 1795 x 1000 mm Test chamber dimensions W x H x D: 355 x 355 x 426 mm 2 x 46 liters Voltage: 230 V 1/N 50 Hz Rated current: 37A Fuses: 250 V, 2 x 3 A Temperature range: +105°C to +142.9°C Humidity range: 75 to 100% RH Temperature stability: ± 0.5°C Pressure range: 0 to 2.0 kg/cm² Heating/pressure build-up time: from 0 to 2.0 kg/cm² in approximately 60 minutes Weight: 390 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), functionality: fully functional, SCM SERGIANE STV 12-13-250 edge banding press Maximum pressing length: 12,000 mm Kjdpfx Agszlhnwj Asdu Maximum pressing width: 250 mm Maximum pressing height: 1,300 mm Number of vertical clamps: 56 Number of front clamps: 12 Pressing force: 5–15 kg/cm² CE certified DTR documentation included Overall length: 16 m Year of manufacture: 2019

Condition: used, Espec Type: EHS-221M Espec (ThermoTec) Stress Test Chamber Overpressure and humidity tests at over 100 degrees Celsius in many different modes. Program capacity of 10 samples with 30 steps per sample. A variety of safety mechanisms: over-temperature/overpressure protection, detection of water supply failure, complete door interlock, and temperature sensor. Saturated temperature range: 105 to 142.9°C Unsaturated temperature range: 105 to 132.9°C Humidity range: 50 to 100% r.h. Nominal pressure: 0.196 MPa at 132.9°C and 100% r.h. External dimensions: Width 740 x Height 1553 x Depth 1000 mm Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm Ksdpfx Agszd Uy Do Asdu Other equipment: with rails and grating Test specimen connections inside Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm Kdjdjd Supgspfx Ag Aou working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5758 Cat.: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Kdodpfx Aozv Ru Ujg Aou Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2441 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - 2 x Blue spot - PSA - Floodlights - Induction / Wire guidance

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-N Estun E21 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual Kjdpfx Asgi Dldeg Asdu - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5759 Category: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Kdedpfxszv H Tyo Ag Aeu Hours: 2482 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DUAL steering!!!! - Adjustable forks! - 2 x Blue spot lights - PSA (Pedestrian Sensing Alarm) - Floodlights - Induction / Wire Guidance

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-N Estun E21 Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm Kdsdpfx Aoh Ranpog Aou - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, Year of construction: 1977, Technical details: x-travel: 1050 mm y-travel: 500 mm z-travel: 500 mm spindle taper ISO: SK40 spindle head swivable left - right: 90 ° quill travel: 180 mm range of revolution per miute: 36 - / 18 step U/min feed:: X+Z: mm/min feed:: Y: - 900 mm/min. rapid traverse : X/Z: / Y: 900 mm/min table surface area: 1200 x 550 mm total power requirement: ca. 10 kW machine weight approx.: 4400 kg dimension machine xH: 3,1 x 2,5 x 2,2 m Console design with tilting, tilting and swiveling table, as well as adjustable vertical milling head. Kedpfx Aou Ndd Rog Asdu Machine with 3-axis digital readout (with resolution 0.01mm) with feed and individual drive of all three axes stepless feed X-axis: Support lengthwise = 700mm; univ. milling table lengthwise 350mm = total lengthwise: 1050mm Accessories: Comparable with the pictures *

Condition: used, mileage: 6,746 km, gearing type: automatic, fuel type: electric, color: red, overall weight: 3,140 kg, empty load weight: 2,360 kg, maximum load weight: 1,500 kg, lifting height: 3,010 mm, tire size: 18X7-8, number of seats: 1, first registration: 11/2015, emission class: none, suspension: other, Year of construction: 2015, operating hours: 6,746 h, total length: 2,580 mm, driver cabin: other, construction height: 2,060 mm, fuel: electricity, load capacity: 1,500 kg, The Toyota 7FBEST 15 electric three-wheel forklift is a reliable used forklift, ideal for use in industrial environments. It was first registered in November 2015 and has a running time of 6,746 operating hours. Equipped with an electric motor and an automatic transmission, it offers an environmentally friendly and energy-efficient solution for lifting and transport tasks. This forklift features a red metallic paint finish and has a compact design with dimensions of 2,055 mm in height, 990 mm in width, and 2,580 mm in length. The permissible total weight is 3,140 kg, making the forklift suitable for a wide range of lifting tasks. Ksdpfxszzfavs Ag Asdu The Toyota 7FBEST 15 is a used model with one previous owner, has been properly maintained, and is in operational condition. The unit can be inspected in Rohrbach from Monday to Saturday without prior appointment. Sale is only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale are subject to change.

Condition: new, Year of construction: 2026, The best-selling and reliable PROD-MASZ press brake! Fast delivery time and high quality! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 180 kg The roller scissors (max. cutting capacity 0.8 mm / steel) The machine complies with CE guidelines and has a 12-month guarantee. Price: € 1.050.00 Roller scissors 0.8mm - plus 350 euros Kodpfxob Eg Hys Ag Aedu Manual folding machine plus 75 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2010 Kdedpfx Agez A D Aps Aju

Condition: new, Year of construction: 2026, Timely delivery, trustworthy equipment ! Bending machine from the only, genuine and reliable manufacturer PROD MASZ® Prod-Masz offers you first class equipment. Convince yourself of our sheet metal bending machines. Kdodscgaa Hepfx Ag Aju Are you looking for quality and expertise for your sheet metal processing machine? Then we are the right partner at your side. Maximum working length of press brake: 2140 mm Bending performance: up to 0.8 mm (steel sheet) Titanium Zinc Sheet: 0.8mm Aluminum Sheet: 1.2mm Copper Sheet: 1.25mm Bending machine bending angle: 145 degrees max Cut with the roller shears over the entire working width Bending beam thickness: 15 mm Cut with the roller shears over the entire working width Lifting of the upper beam in three positions Upper beam stroke: 80 mm degree scale Weight of the folding bench: approx. 180 kg Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros Price: 1.050 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with 23% of VAT.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Kjdpfxoxqp I Ne Ag Asdu

Condition: excellent (used), Year of construction: 2006, turning diameter: 250 mm, spindle bore: 90 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 320 mm, spindle motor power: 11 W, type of input current: three-phase, overall weight: 4,600 kg, Equipment: documentation/manual, HYUNDAI-KIA SKT 21 VM CNC VERTICAL LATHE CNC vertical turning center with an inverted spindle, C-axis, and driven tools. Technical data: Manufacturer: Hyundai-Kia Model: SKT 21 VM Machine type: CNC vertical lathe / vertical turning center CNC control: FANUC Max. turning diameter: approx. 250 mm Max. workpiece diameter: approx. 350 mm Chuck size: 8" Spindle nose: ASA 6 Spindle speed: up to 5,000 rpm Spindle motor power: 11 kW Kedpfxjzzvmmo Ag Asdu Spindle bore: approx. 90 mm Tool turret: 12 tool stations VDI 40 tooling system Driven tools C-axis Axis travel: X-axis travel: approx. 1,255 mm Z-axis travel: approx. 320 mm Rapid traverse: approx. 30 m/min Machine equipped with: C-axis driven tools 12-position tool turret hydraulic chuck coolant system chip conveyor FANUC CNC control