Used Energy Chain 2 Pieces for sale (84,523)

Condition: used, energy chain, cable drag chain, energy guiding chain, cable chain, drag chain Fpsdpfx Ajuxg Rlsfusn -Manufacturer: IGUS, energy chain cable drag chain 2 pieces -Length: 4250 mm -Width: 240 mm -Bending radius: 160 mm -Accessories: incl. clamps see photos -Transport dimensions: 920/890/H480 mm -Weight: 43 kg

Condition: like new (used), functionality: fully functional, extraction nozzle diameter: 300 mm, Two exhaust fans in like-new condition are for sale. They ran very little. They can be tested on-site. The price is for the pair. Fedpfezz Scwex Afujpn The intake diameter is 300 mm. The motor power is 11 kW.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Fpedpfx Aez D Ihfjfuen

Condition: used, energy chain, cable drag chain, energy guiding chain, cable chain, drag chain -Manufacturer: IGUS, energy chain cable drag chain -Length: 5530 mm -Width: 240 mm -Accessories: incl. U-clamps type CFX 12.1 / CFX 12.2 see photos Fpsdpfouxg Rrex Afujn -Transport dimensions: 1060/840/H245 mm -Weight: 26 kg

Condition: excellent (used), mileage: 516,619 km, power: 154 kW (209.38 HP), first registration: 05/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,180 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,120 mm, total width: 2,550 mm, loading space length: 7,240 mm, loading space width: 2,500 mm, loading space height: 2,470 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, = Additional options and accessories = - Air suspension - Low noise - Remote central locking - Roof Spoiler - Spoilers - Sun visor = Remarks = Tail lift: 2000 kg ZCFAG1EF702680575 = More information = Fpodpfx Ajymp Dqofusn Number of cylinders: 4 Engine capacity: 4.485 cc Empty weight: 6.941 kg Carrying capacity: 5.049 kg GVW: 11.990 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: 08-BKV-6 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, clearing needle, push clearing needle -Quantity: 2 pieces still available -Keyway width: 10 mm Fodpfozlgb Nox Afuspn -Type: see photos -Submission/Price: complete -Transport dimensions: 1085/33/H32 mm -Weight: 4.5 kg

Condition: good (used), Year of construction: 2012, DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Girder (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Because the control unit is rigidly connected to the load-carrying device, the operator only needs one hand to operate the chain hoist and guide the load. Application High-quality and sensitive parts can be lifted, lowered, and positioned more gently and safely. Installation processes and assembly operations can be controlled more precisely. Lifting movements can be performed much faster thanks to the almost twice as high nominal speed per lift in the partial load range. Design plug and lift - all electrical connections of the chain hoist are pluggable with a foldable, universal suspension bracket, the hoist can be easily attached to the carriage fatigue-free operation thanks to the ergonomically optimized and robust DSC control switch fast replacement of the entire chain drive without disassembling motor or gearbox parts contactor control 24 V, protection class IP55 operating hour counter end-of-travel switch for the upper/lower hook position high safety and long service life thanks to speed-monitored brake/slip clutch principle Advantage one-hand operation, i.e., the control unit is located above the part to be handled (left and right-hand operation via rocker switch) quick-release coupling enables universal use through easy replacement of the various load-carrying devices Technical Data Brand DEMAG EAN 4039247450527 Manufacturer Article Number 93200146 Load Capacity 80 kg Lifting Height 2.8 m Lifting Speed Control In 2 stages Lifting Speed Fine Lift 4 m/min Lifting Speed Main Lift 16 m/min Number of Load Strands 1 pc Overall Height (H) 694 mm Length 422 mm Depth 268 mm Model DCM-Pro 2-80 V16/4 Control GSA Type 4 Color Azure Blue RAL 5009 Subject to mandatory inspection according to DGUV (UVV) Fpedpfx Ashwd E Njfujn Yes Delivery Unit 1 Gross Weight 25,000 kg Range of movement: 3 meters to the side and 2 meters forward/backward Condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm Fjdpfx Aeyibczofuepn -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg Fpjdpfxsz Hvyzj Afusn EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Year of construction: 1995, condition: used, Flotation tank. - Designed for cooling with ammonia (can also be cooled with glycol), 1 x frame cooling. - Stainless steel - Insulated and clad - Stand frame, short - Cleaning air fitting with safety valve Additional title: Refrigerated stainless steel tanks for outdoor installation Fpodpfx Aszgcvljfuon Capacity: 74480 l Operating pressure: 0,9 bar Width: 12,55 m Height: 3,27 m Material: Stainless steel Position: vertical Base construction: short supporting skirt Features: Cooling: 1 x side wall cooling jacket; insulation; dearation and cleaning combination with safety valve; temperature measurement

Condition: excellent (used), functionality: fully functional, Also see my other listings. Fsdpfx Asv Uvm Rjfuopn 2 units! Identical design. Price: 1 unit €5,900 net, 2 units €10,900 net. Ideal for installation on a single-girder overhead crane (underslung), complete with all controls and DEMAG DST pendant control. Hoist type: DEMAG DH410 H12 Year of manufacture: 2002 Drive group: 4M Reeving: 4/1 Load capacity: 4 t (5 t) Hook travel: 6 m Main lift: 8 m/min Precision lift: 0.8 m/min Both units are in very good condition and come complete with DEMAG trolley drive, 2 speeds. Price per unit when purchasing both: €4,500 net each. Personal delivery possible within Germany, €0.70 per km from 99734 Nordhausen (when purchasing 2 units). On request, 2 bridge travel motors for end carriers, DEMAG KBF90 type with AF gearbox, 2 speeds, also available to match! From large DEMAG stock of hoist and travel motors. Also see my other listings.

Condition: excellent (used), Year of construction: 2023, operating hours: 4,600 h, functionality: fully functional, machine/vehicle number: 023-02-0021-WSXXL II CE12, overall weight: 3,500 kg, type of input current: AC, input voltage: 120 V, table length: 700 mm, table width: 400 mm, total height: 2,380 mm, total length: 2,450 mm, total width: 1,460 mm, laser wavelength: 1,064 nm, Equipment: type plate available, Photon Energy Workstation XXL II CEPHEUS Mark12 – UKP/Picosecond Laser System For sale is a well-maintained Photon Energy Workstation XXL II with CEPHEUS 1012 marker from ongoing operation. This system is particularly suitable for operators of existing Photon Energy/Hitachi systems, medical technology companies, laser marking service providers, or companies with a need for UDI-compliant, permanent marking. Key data: Year of construction/manufacture: February 2023 Operating hours: approx. 4600 hours Laser: Nd-Vanadate, 1064 nm Fsdszxrv Espfx Afuopn Laser power: over 12 W at 500 kHz Pulse duration: under 15 ps Repetition rate: 20 to 500 kHz Cabinet dimensions: approx. 1.46 m x 2.45 m x 2.38 m Weight: approx. 3.5 t Scan field: 160 mm x 160 mm Telecentric lens: F 163 mm, scan field 90 mm x 90 mm ZD30 rotary axis available PHOTONmark, PUC/UDI Control, CamVisionPro and hand scanner available Last maintenance: June 2026 Condition: very good Inspection and test run possible by appointment Without exhaust system, as a central exhaust system is used at the current location. The reference point limit switches in the X, Y, and Z axes have already been converted to proximity switches. The system is financed through a lease. Sale, buyout, direct settlement, or transfer of the contract will be arranged in coordination with the financing partners involved. Sale exclusively to commercial operators/companies. No warranty; liability for defects is excluded in the purchase contract to the extent permitted by law. The system will be delivered in working order with installed control and marking software as well as the activated options. Customer-specific jobs/production programs, article, serial number, UDI and process data will be deleted before handover for data protection and confidentiality reasons. According to the manufacturer, it is generally possible to partially upgrade or modify the machine according to needs. The type and scope of such a modification must be agreed upon by the buyer directly with the manufacturer or service partner and is not part of this sales offer.

Condition: good (used), material lift, roll lifter, assembly lift, carpet roll lifter, lifting lift -Manufacturer: Eska, Materiallift carpet roll lifter 2 pieces / 1 set -Load capacity: max. kg -Lifting height: 415 to 1595 mm -Holder mandrel: see photos -Cable winch: Pfaff Price/Delivery: complete -Dimensions: 745/640/H1950 mm -Weight: 70 kg/piece Fpodpsv Egk Isfx Afujn

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: for profile steel shears, flat steel shears, 2 pieces -Hole spacing: 135 x Ø17 mm -Dimensions: see photos -Submission/Price: complete Fjdszr Hlnjpfx Afuspn -Dimensions each: 175/107/H125 mm -Weight: 6.1 kg/pc.

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Fedpfeztya Iox Afuopn Additional title: 2 insulated, coolable tanks Volume: 44916 l Operating pressure: 0,9 bar Operating temperature: 20 °C Width: approx. 4650 mm Height: approx. 4130 mm Weight: 5000 kg Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, vacuum valve, CIP line with spray head, manometer, yeast plug Periphery: own temperature control

Condition: used, functionality: fully functional, Grinding wheel flange with counter flange and balancing weights Two-part, consisting of: • Flange cone with cone featuring the marking 508x10 - 90x203.2 and 015 022 001 0 • Counter flange with marking 610x10 - 110x203.2 and 015 333 001 0, as well as mounted adjustable balancing weights Precision grinding wheel mounts for Karstens K56 external cylindrical grinding machine, wheel bore H 203.20, large cone 60 mm 3 grinding wheel flanges with counter flange and balancing weights available The flanges are used. Fpedpfxey Nlh Ee Afujn Price negotiable. Our asking price is €540 net, ex works, plus packaging costs. All technical data is subject to printing errors and omissions. Sale exclusively to countries within the EU.

Year of construction: 2004, condition: good (used), Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle stand, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 1910 mm -Load capacity: 15 tons distributed load -Number: 2 axle stands available -Price: for 2 pieces -Dimensions: 1310/1915/H1910 mm/piece Fpedpjy N Dczefx Afujn -Weight: 263 kg/piece

Condition: used, Year of construction: 2001, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 32191 l Operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 3850 mm Height: approx. 4420 mm Material: stainless steel 1.4301 Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: 1 cooling jacket (154 l, 2 bar, glycol), outlet DN65, manhole, safety valve, CIP pipe with spray head, manometer, ladder bar, sampling, temperatur sensor (PT100), crane eyelets Periphery: own temperature control Fsdpfx Afjztyanouspn

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44361 l Fodpfx Aeztya Usfuspn Operating pressure: 0,9 bar Operating temperature: 20 °C Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Periphery: own temperature control

Condition: as good as new (ex-display), Demonstration machine 2-chain infeed table with 2 hydraulic feed rollers Fodsx H Ukdspfx Afuopn Sample image

Condition: good (used), collet chuck, tool holder, tool holder, milling chuck, milling tool, cutter head holder, milling mandrel, power chuck tool setting device, power chuck tool presetting device Fjdpsvm S Ibofx Afuspn -Manufacturer: Oertlieb Gühring, power chuck for tool presetting device 2 pieces -Type: Ortlieb K5 / Gühring TGZ 38 GM300 -Individual components/dimensions: see photos -Price/Delivery: complete -Transport dimensions: 265/132/H175 mm -Total weight: 9.1 kg

Condition: new, Year of construction: 2026, Machine Vice F 160 – Double-Sided Design for Professional Metalworking Applications The F 160 machine vice is a double-sided construction designed for professional use in metalworking workshops, CNC machining centres, and bench drilling applications. Thanks to its well-thought-out design and high-quality materials, it provides precise clamping of long workpieces. It is an indispensable tool wherever stability, even force distribution, and the ability to handle workpieces with unusual geometries are essential. Fedpfxovxgq Us Afuepn Main advantages of the F 160 machine vice High clamping force up to 3000 kg – ensures safe and stable workpiece holding during intensive machining operations. Double-sided construction – allows long workpieces to be clamped while utilising the full length of the machine table. High-quality cast iron body and jaws – provide resistance to deformation and long service life under industrial conditions. Induction-hardened and ground jaw inserts – ensure accurate and repeatable clamping. Thrust bearing – significantly improves the efficiency of the clamping mechanism. Design and technology The F 160 machine vice is manufactured from precision-machined cast iron, providing excellent rigidity and vibration resistance during machining. The movable jaw operates smoothly thanks to the integrated thrust bearing, which improves force transmission while reducing the effort required from the operator. Replaceable jaw inserts allow quick and cost-effective restoration of full functionality after wear. Precision and work efficiency The F 160 vice enables accurate and uniform clamping of workpieces thanks to its double-sided structure, which is particularly important when machining large components. Precise jaw geometry and a stable base directly contribute to high machining quality and repeatable production processes. Applications The F 160 machine vice is designed for: Bench drills, milling machines, and conventional lathes CNC machining centres Toolrooms and single-piece production environments Machining of long workpieces, pipes, profiles, and irregularly shaped components Standard equipment Crank handle for operating the clamping mechanism Locating keys for accurate positioning on the machine table

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Mounted reamers: Machine reamers, 2 pieces -Type: Ø 79.5 mm Mounting 29/33 mm Fpedpfxszhlaij Afusn -Type: Ø 80 mm Mounting 37/40 mm -Submission/Price: complete -Transport dimensions: 160/80/H90 mm -Total weight: 3.8 kg

Condition: good (used), functionality: fully functional, Power: 6370 watts Maximum operating temperature: 95°C Medium: water Two units available! Price per piece! Fodpfxev R Edwo Afuopn Price for two temperature control units: 900 EUR!!!

Condition: good (used), Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Quantity: 30x chain hoists -various manufacturers: Yale, Brand, BKS -Load capacity: from 750-3200 kg Fodpfxob A Rkhj Afuspn -Chain length 1.0-2.5 m -Price/Sale: complete -mostly functional -Dimensions: 1200/800/H600 mm -Weight including packaging: 600 kg