Used Engel Vc 1350 / 300 Spex for sale (15,255)

Condition: excellent (used), Year of construction: 2009, operating hours: 44,561 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 55 mm, Equipment: documentation/manual, Here, as a dealer in injection molding machines, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines manufactured from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Engel Type: VC 1350/300 spex Serial number: 173072 Year of manufacture: 2009 Operating hours: 44,561 h Control: CC200 Fully functional Condition: very well maintained Machine comes from original German ownership Extras: - Handling system Viper12 (z-axis 2240 mm, x-axis 600 mm, y-axis 1200 mm) - Core pull unit 1x - Mounting plate, vertically enlarged - Mounting plate, standard centering 160 mm - Approved for use up to 350°C - Tool nozzle control, single hydraulic - Swiveling injection unit - Screw S8, highly hardened, wear-resistant / for thermoplastics - Screw length L/D 20 - Hydraulic system HV1 for sequential motion sequence - Interface for color dosing - 4 sockets 10A/16A, mold closing side - Interface for ejector locking - Interface for potential-free contacts - Freely programmable, 4x digital output Injection unit: Screw diameter: 55 mm Injection weight: 570 g/shot Injection pressure: 1763 bar / increased 2183 bar Injection volume: 618 ccm Clamping unit: Clamping force: 300 tons / 3000 kN Tie bar spacing: tie-bar-less Mounting plates: 1100 x 700 mm (h x v) Tool opening stroke: 900 mm Tool installation height: 400 mm Max. distance between platens: 1300 mm Ejector force: 90 kN Clamping unit: hydraulic Available immediately from our warehouse in Hanover/Germany, or delivered to your location for an additional freight charge. Hsdpfxjz Ng Rwe Aqgefn Worldwide delivery possible. The machine is our sole property. The requested machine is available immediately in our warehouse in Hanover and is offered after functional testing and can be inspected under power. For information about the machines we offer and our company: - We only sell machines that we have purchased from ongoing production, from our warehouse in Hanover. - All offered machines are inspected and tested before dismantling. - We do not sell insolvency goods. - We are not intermediaries dealing with third-party property. - All offered machines come from successful companies where maintenance and care are a matter of course. - All offered machines can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector force: 80,000 N, ejector stroke: 180 mm, plate length: 860 mm, plate width: 570 mm, total length: 6,300 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 14,200 kg, Clamping force: 200t Year of manufacture: 2007 Injection shot weight: 562g Injection unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 ccm Injection shot weight: 562 g Tool clamping system 200/... Hfodsz Hmm Eepfx Aqgjn Clamping force: 200 t Tool plate dimensions: 860 x 570 mm Ejector force: 80 kN Ejector stroke: 180 mm Tool height: 400 mm Opening stroke: 750 mm Maximum distance between plates: 1150 mm Weight: 14200 kg Dimensions (m) length x width x height: 6.3 x 1.9 x 2.3 m Equipment: - 2 x hydraulic cores on the moving platen - pneumatic valve - robot - 8-zone hot runner system - 8-section rotameter

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Hfsdpfx Aoz Ipu Uoqgjn Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, operating hours: 33,921 h, functionality: fully functional, ENGEL Duo 1350H/330W/600WP combination machine including robot Year of manufacture: 2016 Operating hours: 33921 h Clamping unit Clamping force: 600 t Opening stroke: 1400 mm Tool mounting height: 450 - 1080 mm Maximum mold parting line distance: 1850 mm Mold size (h x v): 1115 x 975 mm Injection unit Screw diameter: 55 and 35 mm Injection volume: 618 + 154 cm³ Hsdpfoz Nkavjx Aqgofn Injection weight PS: 590 + 151 g Injection pressure: 2183 + 1600 bar Equipment: - Interface for rotary table/index plates - Core pull system, 2-way fixed mounting plate - Core pull system, 4-way movable mounting plate - Tool heating, 40 control circuits - Microcomputer CC200 Robot Engel Viper 40 RC300 - Max. handling weight: 23 kg - Z-axis: 4280 mm - X-axis: 1200 mm - Y-axis: 1500 mm - C-axis compact drive M - A-axis compact drive M - 8 additional compressed air circuits - 6 additional vacuum circuits

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Hfjdpfxoyc Ewxe Aqgen Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: used, Year of construction: 2005, operating hours: 95,000 h, clamping force: 200 kN, displacement volume: 113 cm³, injection pressure: 2,178 bar, overall weight: 11,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) Hodpjz A Ialofx Aqgjfn delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Hfodpfx Aqewm Iy Eogjn Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Hodpfoz Iptkex Aqgofn Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Hjdpfx Asz Iqn Njqgofn Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Hfedpfxoz Ap Imo Aqgjn Design: tie-bar-less ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Hjdpfjzgtvvsx Aqgefn

Condition: good (used), Year of construction: 2011, operating hours: 78,000 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, injection pressure: 1,615 bar, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 12,200 kg, warehouse no.: 503731 manufacturer: ENGEL type: Victory 1050-220 spex controller: CC 200 A02 year of construction: 2011 operation hours: 78000 h clamping force: 2200 kN size of mould plates h x v: 880 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm injection volume: 510 ccm Spritzdruck: 1615 bar equipment included: screen text german core pulling hydraulically 2x machine incl. Handling Anti vibration mounts mould heating 8x Hjdpfx Aqez D U Ilogjfn technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 measures of machine l x w x h: 5.7m x 1.7m x 2.2m total weight: 12200KG

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 60 mm Shot weight: 547 g Injection pressure: 1834 bar Metering volume: 618 cm³ Clamping unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-barless machine Hydraulic core pull x 3 Hot runner control x 16 Injection unit hardened - bimetallic Machine has been regularly serviced by authorized Engel service Dimensions: Hfodpfxjz Ipt Dj Aqgsn Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All offered machines are started and tested by our service technicians before sale. You can request a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Hfjdpfxjzrngye Aqgon Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm Hjdoyn Ntzepfx Aqgjfn • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Hedpfjzhudkjx Aqgjfn

Condition: used, Year of construction: 2000, operating hours: 130,000 h, functionality: fully functional, overall weight: 22,000 kg, We are offering this used ENGEL ES 2050/300 HL injection molding machine, manufactured in 2000, for sale. Type: ES 2050/300 HL Machine No.: 40505 Hfsdpfsz Hvvisx Aqgon Year of manufacture: 2000 Weight: 22,000 kg Operating hours: 130,000 2 hydraulic core pull units EM 67 interface for robots Sold without a magnetic plate For sale: Engel ES2050/300HL (EUR 10,000) and Wittmann W753 (EUR 10,000). Together for EUR 19,000. Production continues until January. Inspection and collection possible at the end of January. Location: 7343 Neutal, Austria.

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY VC 650/150 Tech injection molding machine ENGEL ERC 13/1-F robot – SET 1 Year of manufacture: 2005 Clamping unit design: ENGEL tie-bar-less Clamping force: 1,500 kN / 150 t Control system: ENGEL CC200 – color touchscreen Injection unit: 650 Screw diameter: Ø45 mm Screw stroke: 200 mm Screw L/D ratio: 20 Injection volume: 318 cm³ Injection shot weight: approx. 290 g PS Maximum injection pressure: 2,040 bar Maximum screw speed: approx. 315 rpm Maximum injection flow rate: approx. 179 cm³/s Mold opening stroke: approx. 500 mm* Maximum distance between platens: approx. 700 mm* Nozzle stroke: 350 mm Nozzle clamping force: 67 kN Cylinder heating power: approx. 13.3 kW Number of heating zones including nozzle: 5 Hopper capacity: approx. 80 l Machine weight: 9,500 kg Robot: ENGEL ERC 13/1-F Robot manufacturer: ENGEL Hfodszxqycopfx Aqgsn Robot year of manufacture: 2005

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Hfjdpfx Aqozvdbuegen Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: good (used), Year of construction: 2006, I sell the 3-side brushing machine Wikoma SP-3/300 - 1350/2x15°/P, Year 2006. 2 pcs. Surface brushes from top Working width 1350mm Vacuum underpressure table with ventilator. Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy Hfedpfsvyln Iex Aqgjn Available immediately.

Year of construction: 2005, condition: ready for operation (used), A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible. Hjdpfx Aqov Extzogofn

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use Hfjdpozvwl Tsfx Aqgjn • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Hjdpfsxuqh Sex Aqgofn Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t EQUIPMENT ENGEL ecodrive SHV2 (servo-hydraulic drive) Quick-clamping system Core pull control Thermoset package ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,140 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 7,000 rpm, total length: 1,700 mm, total width: 1,130 mm, total height: 1,100 mm, overall weight: 400 kg, Equipment: CE marking, documentation/manual, saw blade guard, Professional panel saw SICAR SEGA 300, manufactured in 2022. The machine is equipped with a 1600 mm long aluminum panel carriage, a scoring saw, and a tilting saw unit. The robust construction, based on a cast iron table and a heavy-duty saw unit, ensures stable operation and high cutting precision. The saw is designed for processing solid wood, furniture boards, MDF, plywood, and other wood-based materials. TECHNICAL DATA: - Manufacturer: SICAR / MA.CO.2L - Model: SEGA 300 - Year of manufacture: 2022 - Panel carriage length: 1600 mm - Carriage dimensions: 1600 × 315 mm - Main saw blade diameter: 300 mm - Main saw blade arbor diameter: 30 mm - Scoring saw diameter: 90 mm - Scoring saw arbor diameter: 22 mm - Main saw blade speed: 4500 rpm - Scoring saw speed: 7000 rpm - Maximum cutting height at 90°: 100 mm - Maximum cutting height at 45°: 75 mm - Saw unit tilting range: 0–45° - Maximum cutting width with parallel guide: 1140 mm - Main work table dimensions: 800 × 500 mm - Auxiliary table dimensions: 800 × 860 mm - Auxiliary side table dimensions: 400 × 500 mm - Main motor power: 4.0 kW / approx. 5.5 HP - Power supply: 380 V, 3 phases - Frequency: 50 Hz - Machine weight: 380 kg - CE marking EQUIPMENT: - aluminum panel carriage running on ball bearings - scoring saw unit with belt drive - manual lifting and tilting of the saw using knobs - parallel guide on a steel shaft - cast iron guide bracket with micrometer adjustment - extendable crossbeam - cross guide with two reversible stops - saw blade guard with extraction port - emergency stop switch - complete set of auxiliary tables as shown in the pictures The machine is in very good visual condition. Compact and robust panel saw suitable for both a carpentry workshop and the production of custom-made furniture. The machine is available immediately. It is possible to start and inspect it before purchase. We offer assistance with loading and the possibility of arranging transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. Hfjdpfszxw N Rjx Aqgen It is possible to view the machine in operation by prior appointment. It is possible to test the machine on site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: ready for operation (used), Year of construction: 1996, operating hours: 105,386 h, functionality: unexamined, machine/vehicle number: 30131, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 20,000 kg, Equipment: documentation/manual, A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. Hsdpjzmrf Nefx Aqgefn The machine has not been inspected but was operational until the end. A linear robot is included, but it has never been used and was probably not programmed.