Used Eq Automation Semi Auto Tube Bending Machine, Bender for sale (86,405)

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. Hjdpfxoz Dtbks Aqgofn The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Hjdpfspu R Nvex Aqgofn Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Hfsdpfxeu Itlne Aqgen Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Siemens PLC control system with touchscreen user interface

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 8 h, machine/vehicle number: BD38NCCOMP, bending angle (max.): 190 °, overall weight: 900 kg, total length: 3,100 mm, total width: 950 mm, total height: 1,500 mm, power: 6 kW (8.16 HP), input voltage: 220 V, type of input current: AC, warranty duration: 12 months, Semi-Automatic Single-Head Hydraulic Pipe Bending Machine BD50NC2A Machine Model: BD38NCCOMP Machine Applications  Transportation Sector For locomotives, automobiles, and bicycles: exhaust manifolds, brake lines, fuel supply conduits, steering mechanisms, air - conditioning ducting systems, seating assemblies, balancing components, bumper structures, window frame assemblies, handlebar components, and frame structures.  Furniture Industry Indoor and outdoor seating and table sets, office furniture including desks and chairs, shelving units, bed frames and associated furniture pieces.  Leisure and Recreation Industry Fitness apparatus, infant strollers, utility carts, and amusement ride installations.  HVAC (Heating, Ventilation, and Air - Conditioning) and Appliance Industry Water heating units, electric heating appliances, gas - fired cooktops, refrigeration units, and air - conditioning equipment.  Heavy Industrial Sphere Piping networks for boilers, heat exchanger, power generation plants, chemical processing facilities, diesel engine manufacturing, and shipbuilding operations.  Diverse Other Industries Household consumer goods, rehabilitation - oriented medical devices, sanitary fixtures, the decoration and interior design sector, the construction industry, agricultural machinery and equipment, and the aviation manufacturing and maintenance industry. Specification The largest applicable carbon steel pipe (bending radius ≥ 2d) Φ38×2.0mm (thickness Max. 2.0) The largest applicable stainless steel pipe (bending radius ≥ 2d) Φ38×1.5mm (thickness Max. 1.5) Maximum core length (*) 850mm Critical Parts and Functional Components Maximum bending radius (*) 320mm Maximum bend angle 190° The number of bends that can be set for each pipe fitting (*) 25 bends The number of pipe fitting files can be set 280 sets (extensible) Working speed bending speed Max.90°/s Hfjdpfxjya An Ne Aqgjn Machine tool bending angle ±0.1°

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Hfsdszrt Uiopfx Aqgen Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Hfedpfxow H Naas Aqgsn Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Including pallet with tools and spare parts

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK S-200RH The CORMAK S-200RH metal cutting band saw is a modern semi-automatic band saw designed for intensive operation in the metalworking industry. It enables cutting at angles from -45° to +60°, providing high precision, repeatability, and efficiency even when processing heavy sections. The machine combines precise blade guidance with automation of key functions, including hydraulic arm lifting/lowering and hydraulic vice control. Main advantages of the machine Hydraulic arm movement control (up/down) with smooth adjustment of lowering speed. Arm position memory function – automatic return to a predefined height. Swivelling saw arm from -45° to +60° with a clear angle scale. Hydraulic quick-clamping vice – suitable for cutting profiles and solid materials. Heavy cast iron saw arm – ensures rigidity and operational stability. Efficient coolant pump with closed-loop cooling system. CE safety system – including limit switches and emergency stop button. Construction and technology The band saw is built on a stable steel base with an integrated hydraulic unit and coolant tank. The saw arm is made from a single-piece cast iron construction, providing high resistance to vibration and twisting, which directly improves cutting quality. The blade guides are equipped with carbide inserts and roller bearings, ensuring accurate alignment and straight cutting of processed materials. A high-performance ABB M3V series motor and worm gear transmission provide two cutting speeds for optimal adaptation to different materials. Precision and work efficiency The machine enables fast and repeatable cutting of pipes, profiles, and solid materials, including very small sections starting from Ø5 mm. Automation of the cutting process (arm movement and hydraulic vice operation) significantly reduces operating time and minimizes operator involvement. The integrated blade cleaning brush maintains proper working conditions and extends blade service life. Applications The CORMAK S-200RH model is designed for: production workshops, steel construction plants, machine manufacturing industries, maintenance departments. It is particularly suitable as a band saw for pipes and profiles in serial production and applications requiring high cutting accuracy and repeatability. Standard equipment Control console mounted on a separate pedestal Integrated hydraulic power unit Hydraulic vice Automatic arm lifting and lowering with position memory function Hodpfx Asi D D A Soqgefn Blade cleaning brush Coolant system with pump Bimetallic band saw blade Technical documentation (DTR) and CE declaration of conformity Optional equipment Material feeding rollers Laser cutting line guidance system Extended cutting length measurement system Semi-Automatic Metal Cutting Band Saw CORMAK S200RH Technical data Parameter Value Machine type Semi-automatic band saw Arm lifting and lowering Hydraulic, smooth adjustment Blade speed 36 / 70 m/min Angular cutting range -45° to +60° Vice Hydraulic Minimum cutting diameter Ø5 mm Minimum material length in vice 30 mm Vice base height 780 mm Cutting blade dimensions 27 × 0.9 × 2910 mm Total motor power 2.1 kW Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 530 kg

Condition: good (used), Year of construction: 1988, functionality: fully functional, WE OFFER AN POWERFULL MANDREL TUBE BENDING MACHINE IT CAN WORK UP TO 110mm tubes bending. Hfedpfxovk I The Aqgsn MACHINE CAN BE AS WELL RETROFFITTED TO A CNC CONTROL...WITH ADDITIONAL SEVERAL SERVO MOTORS, TO ROTATE HEAD AND MOVE FORWARD. IT HAS CLAMPING SISTEM AND ALL RAILS SAM AS FULL CNC. Machine comes with a lot of tools accessoriess. Machine just turn on and work, ready for operation, Tools from 60 up to 100mm 6 SETS OF TOOLINGS INCLUDED + MANY ACCESSORIESS AND TOOLS We can organize transport and loading.

Condition: new, Year of construction: 2026, CORMAK BS370H Semi-Automatic Metal Band Saw The CORMAK BS370H is a robust semi-automatic band saw designed for precise cutting of tubes, profiles, and solid materials. The latest version is equipped with an upper clamping system for bundle cutting and variable blade speed control via an inverter, adjustable from 20 to 90 m/min. These enhancements increase the machine’s versatility and make it easier to adapt cutting parameters to different types of materials. The upper clamp stabilizes stacked workpieces and minimizes movement during cutting. This allows for more efficient cutting of bundles of profiles, tubes, and other repetitive components. Hfjdpfx Aqsycqhcsgon Key Advantages Upper material clamp – stable and efficient bundle cutting. Variable blade speed (20–90 m/min) – speed adjustment via frequency inverter. Semi-automatic operation – hydraulic material clamping, saw head lowering, and automatic return. Mitre cutting from -45° to +60° – wide range of cutting applications. Hydraulically operated vise – fast and repeatable workpiece clamping. Infinitely adjustable downfeed rate – greater control over the cutting process. Blade guides with carbide inserts and bearings – precise blade tracking and improved cutting accuracy. Closed-loop coolant system – cools the cutting zone and dissipates heat effectively. Blade tension indicator – convenient monitoring of correct blade tension. Automatic shut-off in the event of blade breakage – enhanced machine protection and safety. Efficient Bundle Cutting The integrated upper clamp allows multiple workpieces to be securely held in place when stacked on top of each other. This is particularly beneficial for serial cutting of profiles, tubes, and other materials with repetitive dimensions. The material is secured both by the hydraulic vise and the upper clamp, reducing movement and lifting of individual pieces within the bundle as the blade passes through the material. Variable Blade Speed Control The blade speed can be continuously adjusted between 20 and 90 m/min. The inverter enables precise adaptation of cutting parameters according to the material type, cross-section, and specific cutting requirements. Semi-Automatic Operating Cycle Once the material is positioned and the cutting cycle is started, the machine automatically performs the following operations: The hydraulic vise clamps the workpiece. The saw head lowers at the preset feed rate. The blade performs the cut. A limit switch detects completion of the cutting cycle. The saw head is hydraulically raised back to its starting position. The swiveling saw head enables cutting angles ranging from -45° to +60°. The material remains stationary while the operator adjusts the required cutting angle by rotating the saw head. Cutting Capacity at 90° Material Type Capacity Round Ø270 mm Square 220 × 220 mm Rectangular 370 × 220 mm Technical Specifications Parameter Value Model CORMAK BS370H Operation Mode Semi-automatic Mitre Cutting Range -45° to +60° Blade Speed Variable, 20–90 m/min Blade Speed Control Frequency inverter Upper Material Clamp Yes – for bundle cutting Blade Size 3160 × 27 × 0.9 mm Blade Tensioning Manual mechanical tensioning Saw Head Feed Control Infinitely variable hydraulic cylinder Vise Operation Hydraulic Vise Base Height 890 mm Power Supply 400 V / 3 Phase Total Power 1.5 kW Coolant Pump Power 46 W Machine Dimensions (with base) 1850 × 950 × 1500 mm Weight 491 kg

Year of construction: 1995, condition: good (used), The bender can bend aluminum and plastic, Total length: approx. 11500 mm, Hfjdpfx Asrif U Esqgjn depth: 1600 mm.

Condition: new, Year of construction: 2026, Metal Cutting Band Saw CORMAK BS530H – Professional Tool for Cutting Pipes and Profiles The CORMAK BS530H metal cutting band saw is a high-performance semi-automatic band saw designed for precise cutting of steel components, pipes, and profiles at various angles. Its robust cast iron construction, reinforced blade guiding system, and advanced hydraulic technology make it an ideal solution for serial production and demanding industrial environments. The integrated control panel allows a single operator to manage all machine functions, significantly reducing operating time and improving work ergonomics. Main advantages of the machine Semi-automatic operation – hydraulic lifting and lowering of the saw arm and vice control via the control panel. Worm gear transmission with bronze components – ensures smooth, precise operation without vibrations. Stepless cutting speed adjustment from 20–70 m/min – allows adaptation to various materials and cutting conditions. Carbide blade guides with roller bearings – provide durability and highly accurate blade tracking. Quick-clamping vice – manually or hydraulically operated, with left/right positioning capability. Angular cutting from -45° to +60° – with precise angle reading on the scale. Durable cast iron body – guarantees cutting stability and long machine service life. Hydraulic arm lowering adjustment – allows precise control and setting of the return height. Construction and technology The BS530H model features a reinforced drive system and industrial hydraulic components, ensuring reliable operation even under intensive working conditions. The heavy-duty cast iron body reduces vibrations and provides smooth, consistent performance. The ergonomic control console allows all operations to be managed from a single location. The coolant system integrated into the machine base effectively removes heat and contaminants, protecting the blade from overheating and premature wear. Precision and work efficiency Thanks to stepless speed adjustment, manual or semi-automatic operating modes, and the use of a dial tension gauge for monitoring blade tension, the BS530H metal cutting band saw ensures repeatable results and high cutting quality even during long production runs. Work efficiency is further improved by the front material support roller and the arm locking system, which increases operator safety after completion of the cutting cycle. Applications The machine is designed for: industrial production plants, metalworking workshops, companies performing serial cutting of profiles, pipes, and solid steel sections. It is ideal for serial production, steel fabrication, and preparing components for welding or further processing. Standard equipment Control console with semi-automatic functions Hydraulic vice Powered blade cleaning brush Coolant system with pump Front material support roller Dial blade tension gauge CE declaration and technical documentation (DTR) Optional equipment Additional material guide rollers Semi-Automatic Metal Cutting Band Saw CORMAK BS530H Technical data Parameter Value Working height 965 mm Cutting speed 30–80 m/min Saw blade dimensions 3770 × 34 × 1.1 mm Coolant system power 0.1 kW Hodpew U Svlofx Aqgofn Total motor power 3.0 kW Power supply 400 V Machine dimensions (W × D × H) 2200 × 1400 × 2050 mm Weight 730 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, BYSTRONIC, RB-NTB-2.20x4.00-L-AL Autom. Frame Bending Machine Bystronic / Lenhardt Max. frame dimensions: 2200 x 4000 mm Profiles: aluminum and TGI (the machine is not built for TGI but it works ok.) Inkjet printer Domino A520i and bending tools included. Connection: 3/N/PE-50 Hz, 400V, 6 kW | Year: 2005. Hfodpfxsxyk R Rj Aqgen In good technical condition. Available: NOW

Year of construction: 2000, condition: good (used), Semi-automatic pallet wrapping machine, stretch wrapping machine Design with horseshoe-shaped turntable for easy loading with a pallet truck Semi-automatic pallet wrapping machine Manufacturer: Siat Type: HSD 312-S Model A 400 Volts / 50 Hz Year of manufacture: 2000 Pallet wrapping machine Capacity: 1200 kg Turntable: with fork opening Turntable diameter: 1500 mm Adjustable turntable rotation speed Motorized film pre-stretch adjustable to 100% or 200% Turntable height: 75 mm Wrapping programs Program 1: Double wrapping with lifting and lowering of the film carriage Program 2: Double wrapping with lifting – pause for attaching the top cover of the pallet – and lowering of the film carriage Hsdspygwqopfx Aqgefn Program 3: Simple wrapping with only lifting of the film carriage Program 4: Simple wrapping with lifting of the film carriage and pause for attaching the top cover Intended use Re-wrapping palletized loads with stretch film or netting pallet wrapping machine Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 pallet wrapping machine, stretch wrapping machine More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Die SMIPACK FP 560a ist mit Ihrer kompakte Bauweise besonders für die Verpackung von CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the SMIPACK FP 560a is particularly suitable for packaging CDs, DVDs, books, picture frames or other compact items. Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine SMIPACK FP 560a Baujahr / Year 2014 Schweißrahmen 560 x 430mm Hfsdpfx Aqoxp H Udogen Produkthöhe / Product high max. 230mm Folienbreite / Foil width max 600mm Folienrollendurchmesser / Foil Roll Diameter max. 300mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 600-1200 PCs/hour Maschinen Abmessungen / Machine dimensions L 2.020 x W 790 x H 1.055mm Maschinengewicht / Machine weight    148 kg Stromanschluss / Power connection     220-240 V, 50-60 Hz Nennleistung / Rated power 2.500W Nennstromstärke / Rated current 12 A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 Halb-automatische Winkeleinschweißmaschine / Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 Year 2005 - Serial-No. KN 070192 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Hfsdpfxsx Ux D Rs Aqgjn Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, – Capacity: 34 x 3 mm – Digitally adjustable stroke – Emergency stop switch Hfodpfx Aqexq Hl Eogjn – With 3 tool sets: 33.7 mm, 21.4 mm, 16 mm – Documentation – Weight: 80 kg – 400V

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 5,662 h, LOW HOURS 5662 HOURS WITH TOOLS AND ACCESSORIESS Hfodpfx Aqevk Uu Eogen Specifications Manufacturer CRIPPA TUBE BENDING Model CRIPPA Year 2007 Condition Used

Condition: good (used), Year of construction: 1995, Includes bending tool Hfodpfx Aexm Tn Esqgon The machine can process: aluminium, Chromatec/stainless steel. Suitable for moulds and models. 4-compartment profile magazine. Total length: 12,000 mm Max. height: 2,760 mm Depth: approx. 2,000 mm Weight: approx. 2,500 kg

Condition: good (used), Year of construction: 2006, The Aweta G4-14+1 pepper sorting machine is a 4-lane sorting machine for peppers with 14 semi-automatic exits + 1 discharge/oversize exit. The machine generally sorts by weight Main specifications of the version with 12 semi-automatic exits: Type: Aweta G4-14+1 Product: peppers (also suitable for mango, avocado or beef tomato with other cups/rollers) Number of lanes: 4 Exits: 12 semi-automatic exits + return/extra exit Sorting by: weight, size and optionally colour Capacity: approximately 3,500 – 5,000 kg/hour depending on product composition Infeed: singulator with diabolo rollers / cup system Weighing technology: digital Aweta weighing scales Collection: packing tables or roller conveyors possible Voltage: usually 380-400V 3-phase Typical components of the line: Packing table for last 3 exitsSingulator digital weighing scales 12 Semi-automatic packing stationsAvailable from december 2026 * Without feeding system Hodpfx Aqsz Rga Iogefn Option:Taks MPL Paletiser with long infeed roller conveyor (number 16252605001) More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor Hsdjw Dgi Tspfx Aqgsfn - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Category ID: 691 Type: Double-die semi-automatic paper plate making machine If you have any questions or require further information, please send us a message or call us. Hfedpfjz E Damex Aqgsn

Condition: used, Winkelschweißmaschine /Semi-Automatic Foil sealing machine Kallfass KC 8060/650 Großformat Winkelschweißmaschine / Large Size Foil sealing machine Baujahr / Year 1985 - Serial-No. V 7.85.029 Schweißrahmenabmessungen / Sealing Frame size 600 x 800mm Schrumpftunnel Abmessungen Breite 710mm und Höhe 290mm Shrink Tunnel Dimensions Width 710mm and High 290mm Durchlasshöhe Produkte 280mm Folie, Halbschlauchfolie 12 - 80 μm Transportbandgeschwindigkeit 2,5 - 12 Meter / Minute Verpackungsleistung, max. 20 Takte / Minute Spannungsversorgung 208 - 480 Volt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Hjdpfx Asv Hp R Hjqgsfn

Condition: good (used), Year of construction: 2001, Semi-automatic Bomar STG 330 DGH saw - Cutting dimensions: 330mm x 510mm Hsdpfxjzur Dus Aqgofn - 60-degree mitre cut - Variable cutting speed - Year of manufacture: 2001

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: 7395, tube wall thickness (max.): 8 mm, bending radius (max.): 600 mm, working height: 1,200 mm, overall weight: 9,000 kg, TECHNICAL DETAILS Tube outer diameter: 40–100 mm Maximum tube dimensions: 110 × 5 mm Maximum wall thickness: 8 mm Outer diameter of solid material: up to 70 mm Tube insertion length / usable length: 1,200 mm Maximum bending radius: 600 mm Bending height: 1,200 mm MACHINE DETAILS Dimensions & Weight Hfsdpfx Aqoz Im Rasgsn Dimensions (L x W x H): 4,000 x 2,600 x 1,400 mm Weight: 9,000 kg

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Hedpfxsz Ipunj Aqgsfn FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control