Used Erowa Fixhalter, Pendelhalter 3D for sale (1,815)

Condition: good (used), Good day, we offer here used clamping devices from Erowa. These belong to the PalletSet W and are for Wire EDM machining. The following parts are available: Fixed holder ER-030678 Floating holder 3D ER-030923 They have been cleaned and tested by us. In addition, a functional test was carried out. The clamping devices have slight traces of use, and are technically in a very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then we are at your disposal. Ibsdpfxep Eb Dvj An Ioc

Year of construction: 2005, condition: used, measuring range X-axis 650 mm measuring range Y-axis 700 mm measuring range Z-axis 500 mm Usable surface area of the granite slab 819 x 1.330 mm Ijdsz Hqknjpfx An Iebc Max. workpiece weight 650 kg machine weight ab. 775 kg Machine dimensions approx. 1.380 x 1.160 x 2.429 mm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, EROWA UPC clamping system – pallet holder Iedpfx Aezpxkdjn Isbc ER 016093

Condition: used, Year of construction: 2003, operating hours: 81,060 h, functionality: fully functional, machine/vehicle number: 921083, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, table height: 1,000 mm, empty load weight: 2,450 kg, table load: 750 kg, input voltage: 400 V, tank capacity: 760 l, distance table to quill: 220 mm, input frequency: 50 Hz, input current: 18 A, Equipment: documentation/manual, The table has a hard chrome finish. In addition, we also sell the matching EasyChange XT 4-position workpiece changer from Erowa; see the nameplate for the model. Pick-up only. Iedpfx Anoz Spd Io Isbc

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, For sale is an automation cell from the brand EROWA, type Robot Dynamic 150 Linear (ERD 150L), including the process control system JMS 4.0 MoldLine. With the exception of the gantry eroding machine, all production and measuring machines have already been sold. Only the EROWA automation is offered; the Gantry Eagle 500 can be offered separately. The system was put into operation in mid-2020 and is in very good and well-maintained condition. Ijdpfxoz Szh Ns An Ijbc Technical data: Year of construction: 2020 Control / control system: JMS 4.0 MoldLine from Certa Systems Magazine capacity (total): - 20 pallet spaces for PARTOOL clamping system - 360 spaces for EROWA ITS 50 Turret rotation radius: -30° to +300° Transfer weight max.: 150 kg Identification system: EWIS 10 (ID chips) Loading station: Yes, with rotary table Safety enclosure: Yes, according to layout Acceptance: Complete CE acceptance Included in the offer: 3 gripper arms and grippers with RCS coupling, as well as RCS gripper S, support gripper for ITS 50, collection tray on the rotary turret, gripper station (Gripper Dock), software license for Robot Dynamic 150 L, machine interface box including interfaces, loading station, enclosure including all elements and doors, CMM - light curtain system. Note regarding tooling & coaching: The chucks, adapter pallets, vices, Partool tooling, and EROWA ITS holders are NOT included. Coaching by EROWA Automation is not included in the scope of delivery. Upon request, transport and loading can be organized throughout Europe for an additional charge. Prices do not include VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: like new (used), functionality: fully functional, How do you do? We are offering used and compatible clamping devices from Erowa. These are suitable for die sinking and milling. Here are some of the available parts: ER-008617 Plug gauge ER-010723 Control mandrel ITS 50 ER-010561 Replacement probe pin ø 2mm ER-010560 Replacement probe pin ø 5mm Ibedpfx Anovby U So Iec ER-093992 Square 25 holder C F-Tool holder with square 25 ER-010592 Square 25 Alignment ruler ER-010495 Square 15 alignment ruler ER-129072 Uniplate Collet holder ø 72 ER16-ER50 Table probe with magnetic base 3D probe ø1-5 Steel pallet ø148mm All parts have been cleaned and checked by us. A functional test was also carried out. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: excellent (used), Hallo, Wir bieten hier kurzen Erowa Kontrolldorn kurz an. ER-008617. Mit diesem lässt sich der Rundlauf und die Achse ausrichten.Passend für Spannfutter 50 +100. Bei Rückfragen stehen wir gerne zur Verfügung . Ijdpfx Ansiqunwo Iobc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm Iedpfx Anjzlhmmo Isbc AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Iedpfoxuh Ddsx An Iobc

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Ibsdpfx Anezq Urto Ijc Max working width: 1240 mm Membrane: yes No of positions for the rolls: 2 No of work tables: 1

Condition: ready for operation (used), Year of construction: 2020, total height: 2,700 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, overall weight: 2,350 kg, product length (max.): 2,100 mm, number of axes: 3, This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. • Max. distance between table and probe holder (without probe): 668 mm • Max. distance between columns at table height: 650 mm • Usable granite slab area: 650 x 1700 mm • Max. loadable workpiece weight: 650 kg Ibjdpfx Aox D Hvqon Isc Additional equipment • PH10MQ touch probe system with SP25M-2 • FCR25-L6 touch probe changer • ARCO Presoft software

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck for sale. EROWA ER-026229 UPC chuck UPC collet set, 82/82 mm through-hole (special version) Year of manufacture: 2023 New price: €9,940 The chuck is in very good condition and fully functional. Inspection possible by appointment. Ijdpfx Anjzw D E Ns Iobc Shipping and inspection are possible!

Condition: used, functionality: fully functional, machine/vehicle number: SG74S34001, Year of construction: 2017, operating hours: 7,431 h, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, input current: 30 A, HP MULTI JET FUSION 4200 ADDITIVE MANUFACTURING SYSTEM Located in ALBACETE, SPAIN 7,431 print hours · 2 build units · Tested and functional From a professional service bureau that has now closed. Series production of end-use parts in PA12 nylon. === THE SYSTEM INCLUDES === HP Jet Fusion 3D 4200 printer — S/N SG74S34001, P/N M0P44B, built 04/05/2017 HP Jet Fusion 3D Processing Station (powder processing) Build unit 1 — S/N SG74C35005, P/N M0P45B, built 04/05/2017 Build unit 2 — S/N SG74R35003, P/N M0P45B, built 27/04/2017 Extraction system and external powder collection container HP 3D High Reusability PA12 powder in stock, part factory sealed === ACTUAL USAGE DATA === Read directly from the machine's Printer Information screen: Print time: 445,886 minutes, approx. 7,431 hours Jobs: 718 total, 590 completed successfully Layers printed: 2,800,493 Volume printed: 1,308 litres Fusing lamp calibration: valid Material run: HP 3D High Reusability PA12 Last job on record: 1 July 2025 === SERVICE POSITION === Iodpfx Anoy U H Ido Isbc The HP service contract has EXPIRED. The buyer will need to arrange service and, where HP requires it, recertification on relocation or change of ownership. That cost is not included in our price and is worth budgeting for. The machine has been standing since July 2025. We cannot warrant printhead condition after that time; it would be sensible to plan on replacing them. The agent cartridges are effectively empty (0.2 cc fusing, 0.2 cc detailing). The intermediate tanks hold approx. 1,470 cc and 1,142 cc. HP discontinued this model in October 2024, with supplies and support committed through October 2029. The price reflects this position. === TECHNICAL DATA === Manufacturer: HP Model: Jet Fusion 3D 4200 Year: 2017 Technology: Multi Jet Fusion (MJF), powder bed Printer supply: 9 kW, 220-240 / 380-415 V, 30 A, 3W+N+PE Build unit supply: 3 kW, 200-240 V, 16 A, single phase Approvals: UL E165854, CE, FCC Part 15, EAC Printer dimensions: 2,210 × 1,238 × 1,448 mm === APPLICATIONS === Series production of end-use parts, short and medium runs, functional prototyping, automotive, consumer goods and tooling. High Reusability PA12 allows unfused powder to be recycled between jobs. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE2-HP Serial numbers, plate photographs and the Printer Information screen are available in the attached documents.

Year of construction: 2007, condition: ready for operation (used), overall weight: 1,300 kg, number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. • Maximum Load Capacity (Magazine): 1500 kg • Magazine Plate Type: MTS 400 • Magazine Capacity: 6 Positions per Level • Maximum Load per Level: 1500 kg • Maximum Load per Position: 250 kg • Maximum Transfer Weight (RCS 5): 250 kg • Maximum Transfer Weight (RCS I): 130 kg • Required Coupling for Loads >130 kg: RCS 5 Coupling with RCS 5 Gripperlink ER-038622 • Supply Voltage: 3 × 400 VAC ±10% / 3 × 208 VAC ±10% / 3 × 480 VAC ±10% • Frequency: 50/60 Hz • Power Rating: 710 VA • Nominal Current: 1.8 A • Fuse Protection: 10 ATT • Service Socket Voltage: 230 VAC • Minimum Pneumatic Pressure: 5 bar • Minimum Air Consumption: 200 l/min (Nameplate) • Pneumatic Air Quality: Dry, Oil-Free • X-Axis Travel: Type Dependent • Z-Axis Travel: 75 mm • M-Axis Rotation: 360° • Z-Axis Drive: Pneumatic • M-Axis Drive: Electric • Net Weight: 1300 kg • Interface Type: EROWA Standard Interface • Communication Interface: RS232 • Optional Communication Interface: RS422 • Interface Connector: 72-Pin Harting Connector • Communication Protocol: EROWA EWIS Protocol Iedpozcdwdjfx An Ijbc • Alternative Communication Protocol: EROWA Standard Protocol • Robot Door: Pneumatic Door Valve Kit • Pneumatic Connection: Standard • Electrical Connector: Harting 6-Pin (230 V) • Electrical Connection: 230 V (Phase 1 + 2) • Machine Condition: No Longer Connected to Power • Viewing: Available

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, pipe diameter (max.): 210 mm, pipe length (max.): 6,000 mm, workpiece weight (max.): 800 kg, input voltage: 400 V, type of cooling: water, overall weight: 5,000 kg, total length: 12,000 mm, total width: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, FOR SALE: High-Precision 3000 W Fiber Laser Tube Cutting Machine (6 m) Industrial-grade 3 kW tube laser equipped with a side-loading system, a premium IPG YLS 3000 laser source, and a German LT Ultra bevel cutting head. A powerful and versatile solution for cutting round, square, rectangular, and oval tubes, as well as special profiles, with bevelling up to 45°. Machine origin & key details Loading system: side-loading Year of manufacture: 11/2017 (commissioned in Finland in 2018) Laser source: IPG YLS 3000 – 3000 W fiber laser, manufactured in the USA Bevel cutting head: LT Ultra-Precision Technology, manufactured in Germany Filtration: Welldone dust collector and filtration unit Key highlights Versatile tube profiles – round, square, rectangular, and oval tubes, plus open and custom shapes 3D bevel cutting – integrated bevelling up to 45° for high-precision weld preparation High speed & accuracy – max. operating speed 100 m/min, acceleration 1.0 G, positioning accuracy ±0.03 mm Heavy-duty capacity – tubes up to 6 m in length, max. load 800 kg Technical specifications Parameter Specification Laser power 3000 W (3 kW) Laser source IPG YLS 3000 (manufactured in the USA) Bevel cutting head LT Ultra-Precision Technology (manufactured in Germany) Filter / dust collector Welldone Loading system Side-loading Year of manufacture 11/2017 (commissioned in Finland 2018) Max. material length 6000 mm (6 m) Round tube diameter Ø 20 – Ø 210 mm Square / rectangular tube size 20 × 20 mm – 150 × 150 mm (any side) Bevel cutting angle ≤ 45° X/Y positioning accuracy ±0.03 mm X/Y repeat positioning accuracy ±0.02 mm / 1000 mm Cutting gap width 0.1 – 0.2 mm Max. operating speed 100 m/min Max. acceleration 1.0 G Max. loading capacity 800 kg Machine weight 4000 kg Machine dimensions (L × W × H) 12 000 × 2500 × 1900 mm Gross power < 40 kVA Power supply 380 V ±5 %, 50 Hz Ibodozuf Dhepfx An Ioc Operating temperature / humidity 0 – 40 °C / < 90 %

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck for sale. EROWA ER-070649 UPC chuck with ITS Chuck 100P. Original new price: €9,237. The chuck was mounted on a measuring machine and therefore was not exposed to any stress or dirt. Iodpfey Rzx Nex An Ijbc The clamping plate is in very good condition and fully functional. Inspection possible by appointment. Shipping and inspection possible!

Condition: excellent (used), functionality: fully functional, Hello, We offer used and new pallets for workpiece clamping from Erowa or compatible manufacturers. These are prepared to accommodate clamps with a 52mm pitch. We can also easily adapt clamps with a 96mm pitch. Clamping spigots included. Individual acceptance is possible. Spare parts are available. The clamps are not for sale. Ibjdpewa Ihiefx An Ioc The used clamping devices have been cleaned and tested by us. A functional test was also performed. The clamping devices show slight signs of wear. Do you have any questions? We would be happy to help.

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Isdpfx Aoz Nhx Aon Ijbc Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Condition: good (used), Good day, Iedpfx Aop Hf Iton Ijbc we offer here used pallets for workpiece clamping from Erowa. These belong to the pallets P 148 Inox and are suitable for machining. The following parts are available: Pallet P 148 Inox ER-098667 6x Pallet P 148 Inox ER-041912. 3x They were cleaned and checked in our company. In addition, a functional test was performed. The clamping devices have slight signs of use, and are technically in very good condition. Clamping spigot included . Individual acceptance also possible. Spare parts are available. Do you have any questions? Then we are at your disposal.

Condition: excellent (used), Year of construction: 2004, Accessories EROWA - SWIAS Ibodpfey Egv Aox An Ioc Year approx. 2004 Approx. 60 pieces

Condition: refurbished (used), functionality: fully functional, Hello, We are offering rebuilt ER-093996 Square 25 Holder C from Erowa. The holders were converted from the old version ER-010607 without gripper grooves and sealing plate. We completely disassembled, blasted, cleaned, and readjusted them. Including clamping spigots. Ibjdowa Sffepfx An Isc You are also welcome to send us your holders for rebuilding or overhaul. We are happy to answer any questions or provide technical assistance.

Condition: used, Year of construction: 2010, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, We offer this used Werth Easyscope 300x200x200/VID/TP 3D CNC coordinate measuring machine, manufactured in 2010. Type: Easyscope 300x200x200/VID/TP 3D CNC Year of manufacture: 2010 Voltage: 230 V AC Current: max. 10 A Iodpfx Ansz Ditvs Iebc Frequency: 50 Hz Serial number: 10-00012 Measuring range as indicated: 300 × 200 × 200 mm Control: CNC Measurement: 3D System: vision system + measuring probe Measuring table: glass Manual control: panel with joystick Connectors visible on the device: Video / Motor / Scale / Probe Safety / emergency switch Control computer visible in the pictures The machine can be used in quality control, tool rooms, metrology departments, measuring laboratories, and for the inspection of precision manufactured parts. Inspection of the device is possible by prior arrangement. The device has been used sparingly and has not been calibrated since 2029. If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Good day, We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for die-sinking EDM and milling. The following parts are available: ER-048377 UPC Alignment pallet Erowa T-slot pallet 320x320 Base body made of aluminum, bars hardened and ground. Iodpfxstk Hake An Isbc ER-016917 UPC Aluminum pallet 320 x 320 x 40 with clamping bar They have been cleaned and checked by us. A functional test was also carried out. The clamping devices have signs of use and are technically in very good condition. Individual acceptance also possible. Spare parts are available. Do you have any questions? Then please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, We are offering a used UPC chuck with ITS Chuck 100P for sale. Ibodpsiwdqvofx An Ioc If required, a control unit would also be available. It can be used on milling, grinding, measuring, drilling, and wire erosion machines. The chuck has been used very little, has only minor signs of wear, and is in very good technical condition. Please do not hesitate to contact us if you have any questions.

Condition: used, functionality: fully functional, machine/vehicle number: L2406, Year of construction: 2023, operating hours: 494 h, total length: 2,772 mm, total height: 2,281 mm, total width: 1,683 mm, overall weight: 2,869 kg, input voltage: 230 V, input frequency: 60 Hz, ambient temperature (max.): 29 °C, table width: 609 mm, table length: 914 mm, Equipment: compressor, FDM Technology We offer the Stratasys F900 industrial-grade 3D printer, which utilizes advanced FDM (Fused Deposition Modeling) technology. The system supports 14 certified materials, including biocompatible, flame-retardant, UV-resistant, weather-resistant, antistatic, flexible, engineering-grade, tooling, chemical-resistant, and high-temperature-resistant materials. The Stratasys F900 is an industrial FDM 3D printer designed for high-performance additive manufacturing. It enables serial production, functional prototyping, tooling and fixture production, and the production of parts for final products. The printer supports the MTConnect platform, has an integrated monitoring camera, allows for unattended operation, and ensures repeatable, industrial-quality production. It supports native CAD files from SolidWorks, CATIA, Siemens NX, Autodesk Inventor, and other systems. -Large build volume: 914 × 610 × 914 mm. -14 certified engineering materials. -Layer thickness: 0.127 / 0.178 / 0.254 / 0.330 / 0.508 mm. -Accuracy up to ±0.089 mm. -Heated, enclosed build chamber. -Soluble or breakaway support material. -Suitable for prototypes, tooling, and end-use parts. Optional equipment: -Transformer -HW upgrade for the F900 system – dedicated print head for hard materials: Ibjdpfjzv S Rkjx An Ioc -Nylon 12CF and Antero 800NA (reinforced material feed motors) -Set of accessories and fixtures from the manufacturer for brand new STRATASYS 3D printing systems -GrabCAD, Insight, and Control Center software