Used Esm Outer Shoe - 1 Piece for sale (100,644)

Condition: new, Spiral hose set, ID 6.5 mm, OD 10 mm, L 7.5 m, connector DN 7.2, G 1/4 inch, Rl. RIEGLER · Polyurethane · with rotatable coupling and kink protection spring · extremely flexible and kink-resistant · operating temperature from -40 to +74 °C · max. operating pressure: 10 bar at 23 °C · The highly elastic polyurethane hose has a similar restoring force as the conventional nylon spiral hose, but is less prone to forming kinks and has a significantly higher abrasion resistance. This reduces the risk of scratching painted or sensitive surfaces. · Further technical properties: temperature range: -20 to +60°C · physical state: gaseous outer coil diameter: 60 mm Pedpfx Aie Ab Rqqo Tegu operating pressure: 10 bar connector thread, inch: G 1/4 ? connector thread, mm: 6.4 mm working length: 7.5 m operating temperature: -40 to +74 °C hose diameter: 9.5 x 6.3 mm

Condition: new, 2010370;381 Pjdo Ab N Tqjpfx Ai Tjgu Packaging unit: piece Packaging quantity: 1

Condition: new, N24F; N24F2V; N 24 F/2 V Packaging unit: piece Pgode Abg Apopfx Ai Tou Packaging quantity: 1

Condition: new, Circular saw blades for table saws Pgjdpfxj Ab Ruij Ai Tou Made in Germany.

Condition: new, 2011430;38 Packaging unit: piece Packaging quantity: 1 Psde Ab N Ubepfx Ai Tegu

Condition: new, refers to: 35; 65; 135; 148; 158; 165; 175; 178; 230; 240; 340; 350; 355; 550 Packaging unit: Pack Pgedpfxs Abcy Ro Ai Tju Packaging quantity: 1

Condition: new, Description Pgsdpfx Ais Adh H Ue Tsu Equipped with a powerful motor that can be adjusted to three speeds, the PCW3000-Li can be used both indoors and outdoors, down to -14°C (6.8°F). It features a brushless electric motor that can be tilted 360°. It is a direct drive, meaning there is no clutch. Depending on the selected speed and the weight of the load being pulled, the battery provides 20 to 40 minutes of continuous pulling without any loss of power. It is always ready for use and requires no maintenance when not in operation. Included in the set: 1x PCW3000-Li: Battery-powered pulling winch, max. pulling force 1000 kg 1x PCA-1205M: Polyester rope, 10 mm x 50 m, 2200 kg MBS 1x PCA-1360: "ROPEWIZER" heavy-duty thimble for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1275: Stainless steel pulley, 60 kN MBL, for 6-10 mm ropes 2x PCA-1276: Oval steel carabiner, MBS 25 kN 1x PCA-1281: Rope end hook with safety latch, MBS 750 kg 1x PCA-1260: Polyester sling, 60 mm x 2 m, MBS 2180 kg 1x PCA-0231: 82V quick charger with active cooling 1x PCA-0206: 82V lithium-ion battery with Bluetooth - 2.5 Ah capacity 1x PCA-1350: Polyester round sling, 2.50 m

Condition: new, YARBO Core Garden Robot – The central unit for your automated property maintenance. The YARBO Core Garden Robot is the central base unit of the innovative YARBO system and the foundation for fully automated, year-round garden and property maintenance. With powerful technology, an integrated battery, and a docking station, the YARBO Core is ready for immediate use and can be flexibly expanded. The YARBO Core forms the basis for all system functions and is essential for the operation of the YARBO modules. Thanks to its modular design, the YARBO Core can be individually adapted and expanded with various modules as needed. This transforms a single device into a versatile solution for a wide range of applications around your property. A system for all seasons With the appropriate YARBO modules, the Core performs various tasks and flexibly adapts to each season: Snow blower for automatic snow removal in winter Lawnmower for consistent lawn care in summer Leaf blower for clean paths and areas in autumn Your advantages with the YARBO Core Central base unit for the complete YARBO system Modularly expandable for various applications Fully automated property maintenance without manual effort Includes battery and docking station Intelligent navigation and precise control Ideal for private and commercial applications Intelligent technology for maximum efficiency The modern control system, combined with advanced navigation and sensor technology, enables precise and efficient operation. The YARBO Core recognizes obstacles, automatically plans optimal routes, and works almost independently. Even larger areas and challenging terrains can be reliably managed. Modern Connectivity & NetRTK Depending on the application, the YARBO Core can be connected via Wi-Fi, 4G, or a YARBO Data Center. In addition, the system supports modern NetRTK technology, which provides RTK correction data directly over the network. This means that YARBO can be used – depending on location and connection – even without its own Data Center. A stable Wi-Fi or 4G connection is required for functions such as NetRTK, weather data, remote access, and app control. Using 4G may incur additional data charges. Technical Data System: Modular drive system Navigation: GPS, sensors, and intelligent control Pgodpfx Ao Adfyrji Tou Battery: integrated Charging station: includes docking station Applications: year-round property maintenance Scope of delivery YARBO Core Garden Robot (base unit) Docking station Integrated battery Accessories and mounting material Note: Suitable YARBO modules are required for operation and are available separately depending on the application. The ideal solution for anyone who wants to automate their property maintenance and have a flexible solution for every season. Discover the right YARBO modules now and expand your YARBO Core for every season.

Condition: new, YARBO 1in1 Set – Snow Blower The YARBO 1in1 Set with snow blower, including the Core unit, is the ideal solution for comfortable and reliable snow removal in winter. With the powerful YARBO base unit and the snow blower module, paths, driveways, and outdoor areas can be efficiently cleared of snow. The system impresses with its modern technology, intelligent control, and reliable operation. Snow is removed evenly, while the modular design allows for expansion with additional attachments at any time. Your advantages: Complete system including YARBO Core Reliable snow removal in winter Ideal for paths, driveways, and outdoor areas Modular and expandable with other YARBO modules Comfortable and time-saving operation Technical data: Pgods Adfziepfx Ai Teu System: YARBO Core + Snow Blower Module Application: Snow removal in winter Drive: Electric (battery) Function: Snow removal

Condition: new, The PRK 26 is an extremely powerful machine with a low weight. The ram is placed on the pile and operates independently after the release valve is opened. With this machine, you can drive ramming elements with a diameter of up to 120 mm into the ground without pre-drilling. Weight: 29.0 kg Air consumption: 1300 l/min Podpfxo Adilrs Ai Tegu Impact rate: 1600/min Impact energy: approx. 255 Joules at 7 bar Operating pressure: 4.0 - 7.0 bar Sleeve diameter: 120 mm, other sleeve diameters available upon request Handle length: approx. 1 m Impact rate per minute: 1600 Weight: 29.0 kg Max. outer diameter of the ramming element: up to 120 mm Air consumption: 1300 l/min

Condition: new, Description Podpfj Adlafjx Ai Tsgu The VPE16 Vogesenblitz log splitter offers an impressive splitting force of 16 tons and is powered by a combined drive system via PTO shaft and an electric motor with 400 V/4.8 kW, equipped with a double pump. It is characterized by its compact design with a lowerable cylinder for a transport height of 1.90 m and is equipped with a three-point linkage for categories I and II. Safety is ensured by an easily operated 2-hand safety circuit, while two splitting speeds and a rapid piston return increase efficiency. The ergonomically shaped splitting wedge and the replaceable splitting knife with a length of 245 mm ensure user-friendliness and durability. Other features include brass guides, a full-steel base frame, a powder coating, and a holder for an axe and hatchet. The log splitter complies with the safety standards according to EN609-1 and has a mechanical log lifter. - 16 tons splitting force - Combined drive via PTO shaft and electric motor 400 V / 4.8 kW with double pump - Compact splitter with lowerable cylinder (quick release) for transport height 1.90 m - Three-point linkage cat. I and II - Easily operated 2-hand safety circuit - 2 splitting speeds - Rapid piston return - Ergonomically shaped splitting wedge - Splitting knife length 245 mm - Replaceable splitting knife - According to EN609-1 incl. mechanical log lifter - Holder for axe & hatchet - Brass guides - Full-steel base plate - Powder coated Drive: PTO shaft drive & electric motor 400 V Pump: Single / Double Opening width (cm): 108 Dimensions (H x L x W cm) (*working position - transport position): 250-190* x 120 x 110 Pump capacity (L/min): 54 / 42 Speed 1 (cm/s): 10.6 / 9.5 Speed 2 (cm/s): 27.8 / 20.9 Splitting force (tons): 16 Piston return (cm/s): 16 / 14.2 Container capacity (L): 28

Condition: new, Description The VP12 Vogesenblitz log splitter offers a splitting force of 12 tons and is powered via a power take-off (PTO) with a 37-liter pump. It is a compact splitter with a lowering cylinder for a transport height of 1.90 m and features a three-point linkage of categories I and II. The easy-to-use two-hand safety control, two splitting speeds, and the rapid piston return ensure efficient operation. With an ergonomically shaped splitting wedge, a splitting blade length of 245 mm, and an interchangeable splitting blade, it can be used in a variety of applications. It complies with the safety standard EN 609-1 and is supplied including a mechanical log lifter. Additional holders for a splitting maul and axe, as well as brass guides and a robust powder coating, complete the equipment. - 12 tons splitting force - Drive via PTO, 37-liter pump - Compact splitter with lowering cylinder (quick release) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use 2-hand safety control - 2 splitting speeds - Rapid piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Interchangeable splitting blade - Complies with EN609-1 incl. mechanical log lifter - Holder for splitting maul & axe - Brass guides - All-steel base plate - Powder coated Psdj Adldwjpfx Ai Tegu Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety device - Cable Ø 6 mm (Overall height in transport position with winch ~213 cm) Opening width (cm): 108 Speed 2 (cm/s): 25.6 Pump capacity (L/min): 37 Splitting force (tons): 12 Pump: Single Piston return (cm/s): 18.9 Drive: PTO drive Speed 1 (cm/s): 11.4 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110 Tank capacity (L): 28

Condition: new, Description The VPE12 wood splitter offers an impressive splitting force of 12 tons and is equipped with a combined drive system via a power take-off, a 37-liter pump, and a powerful electric motor (4.8 kW/400 V). This compact splitter features a lowerable cylinder for a transport height of only 1.90 m, a three-point linkage (Cat. I and II), and an easy-to-use two-hand safety switch. With two splitting speeds and a fast piston return, it offers high efficiency. The ergonomically shaped splitting wedge and the replaceable splitting blade (245 mm) ensure optimal performance. Furthermore, it is equipped with a hydraulic log lifter according to EN609-1 and provides holders for an ax and hatchet. The brass guides and the sturdy, all-steel base plate are powder-coated, ensuring durability and robustness. - 12 tons of splitting force - Combined drive via power take-off, 37-liter pump, and 400 V / 4.8 kW electric motor - Compact splitter with lowerable cylinder (quick-release) for a transport height of 1.90 m - Three-point linkage Cat. I and II - Easy-to-use two-hand safety switch - 2 splitting speeds - Fast piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - Complies with EN609-1, including hydraulic log lifter - Holder for ax & hatchet - Brass guides - All-steel base plate - Powder-coated Cylinder return speed (cm/s): 18.9 / 12.5 Drive: Power take-off and 400 V electric motor Pump: Single Opening width (cm): 108 Pgsdpfs Adk Twsx Ai Tou Speed 1 (cm/s): 11.4 / 7.7 Splitting force (tons): 12 Pump output (L/min): 37 / 21 Speed 2 (cm/s): 25.6 / 16.7 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110 Tank capacity (L): 28

Condition: new, - Increased ground clearance - Lower loading height - Improved support Pedpfxj Adg H Ts Ai Tegu - More efficient cushioning

Condition: new, FD404; 405; 406 Podpfxo Abd Uvs Ai Tsgu Packaging unit: piece Packaging quantity: 1

Condition: new, for Vogesenblitz horizontal wood splitter, 28 tons. Pedpfxj Adgm Ts Ai Tegu

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 192 mm Pjdpfx Aijb A Sqro Tsgu -Quantity: 1 milling cutter Price: complete -Weight: 5 kg

Condition: new, Description Pjdj Adgphopfx Ai Togu The FB509 TF T Vogesenblitz 9-ton wood splitter is the most powerful AMR short log splitter and impresses with its high-performance features and well-thought-out safety features. With a 2-hand safety circuit for safe and efficient operation, robust construction, and a solid work table, it ensures stability and durability. The practical wood storage areas facilitate the handling and stacking of wood. The wood splitter is equipped with a chassis that facilitates transport and offers additional safety through a protective switch for the electric motor, as well as an integrated oil filter. The continuously adjustable stroke of up to 50 cm allows adaptation to different wood sizes. The FB509 TF T offers you a reliable device for effective wood splitting work. - 2-hand safety circuit with synchronized movement - Splitting wedge with quick return - Length of splitting wedge 325 mm - Cylinder stroke 50 cm, continuously adjustable for a wide range of wood sizes - Oil filter protects the system from contamination - Splitting length continuously adjustable for flexible adaptation - Fixed splitting table for splitting lengths up to 55 cm - Height of the splitting table approx. 88.5 cm - Incl. chassis and two storage baskets Opening width (cm): 55 Pump (cm/s): Single Splitting force (t): 9 Drive: Electric motor 4 kW / 400 V Dimensions (H x L x W) (cm): 130x60x84 Ram advance (cm/s): 6.8 Hydraulic oil capacity (L): 10 Pump capacity (L/min): 16.5 Ram return (cm/s): 15.15

Condition: new, The AMR loading grapple is designed for professional timber handling and offers maximum control in daily use. It enables safe gripping, precise rotation, and efficient loading of logs. The integrated oscillating brake ensures smooth operation and significantly reduces the after-swing of the grapple. Additionally, the changeover valve allows the grapple and rotator to be operated using only one control unit – ideal for tractors with limited hydraulic connections. In combination with the robust boom and sturdy construction, the grapple is ideally suited for demanding applications in forestry and agriculture. Pedpfx As Adgzksi Tjgu - Oscillating brake for smooth and controlled operation - Changeover valve for operation via a single control unit - Euro mount and three-point linkage Cat. II included as standard - Brackets for saw chains integrated as standard - Brackets for hydraulic hoses included as standard - Locking mechanism for the grapple for safe transport with the Euro mount - Robust, aesthetically pleasing welded steel frame - High-quality powder coating for long service life Grapple opening: 130 cm Max. load capacity: 2,000 kg Rotator: 3 t Formiko "FHR 3000 L" shaft rotator Boom length: 1,050 mm Max. hydraulic pressure: 210 bar Hydraulic supply: 4 hoses / 2 double-acting control circuits required

Condition: new, The AMR loading grapple is a well-designed solution for professional timber handling. It enables safe gripping, rotating, and positioning of logs during daily operations. Thanks to the integrated swing brake, the grapple operates much more smoothly and with greater control, especially during transport and when precisely placing the timber. The robust design and high-quality steel frame ensure a long service life, even under demanding conditions. The standard Euro mount and three-point linkage (Cat. II) allow the loading grapple to be used flexibly and quickly mounted on the tractor. - Swing brake for smooth and controlled operation - Euro mount and three-point linkage Cat. II as standard - Brackets for saw chains integrated as standard - Brackets for hydraulic hoses as standard - Locking mechanism for the grapple for safe transport with the Euro mount - Robust, aesthetically pleasing welded steel frame - High-quality powder coating for a long service life Rotator: 3 t. Formiko "FHR 3000 L" shaft rotator Pjdpo Adgy Tofx Ai Tjgu Hydraulic supply: 4 hoses / 2 double-acting control circuits required (optional with electric switching valve) Max. hydraulic pressure: 210 bar Grapple opening: 130 cm Maximum lifting capacity: 2,000 kg Boom length: 1,050 mm

Condition: new, 26.18.32; 26.18.32; 195126 Conical clamping fitting: 15.8 mm AxB: 42 x 104 mm Fork width: 120 mm Pedpfx Ao Abl I Dsi Tsgu Frame size: 2600 Packaging quantity: 1 Profile D: 44.5 Length: 128 mm Packaging unit: piece

Condition: new, 27.84.04; 27.84.04; 377658 Length: 165 mm Pgods Abm Uxjpfx Ai Teu Fork width: 138 mm Packaging quantity: 1 Packaging unit: piece A1xB1: 50 x 118 mm Size: 2700 D: 44.5 mm

Condition: new, FHL 01B swing brake: the upper connecting piece is designed as a single tab and is compatible with fork-shaped crane tips. Joint developed with various optional upper connection dimensions. Available for fork-shaped crane tips with widths of 60mm, 70mm, 80mm. Available models for upper connecting bolt diameters of 25mm, 30mm, 35mm, 40mm, 45mm. Psdpfs Adgp Uox Ai Tjgu Formiko FHL 01B swing brake: compatible with rotators with an upper connecting part designed as a single tab. Various models for rotators with connection widths of 60mm, 73mm. Options for connecting bolt diameters on the rotator and joint: 25mm, 30mm. FHL 01B housing, manufactured from high-quality, impact-resistant forged steel. When ordering, please specify the desired dimensions: - "A" width of the upper mounting: 60/70/80 mm - "B" diameter of the upper bolt: 25/30/35/40/45 mm - "C" width of the lower mounting: 60/73 mm - "D" diameter of the lower bolt: 25/30 mm

Condition: new, 21.83.02; 21.83.02; 365800 Size: 2300 A1xB1: 27 x 75 mm Length: 125 mm Fork width: 84 mm Packaging quantity: 1 Packaging unit: piece Pgjdpfx Aij Abmzxo Tsu D: 34.9 mm

Condition: new, 35.10.830; 35.10.830; 194081 Fork width: 86 mm Packaging quantity: 1 Pgsdpfx Ae Abl Idsi Tju Profile D: 34.9 A1xB1: 27x94 mm AxB: 32x76 mm Ball diameter X: 27 mm Packaging unit: piece Size: 2480 Length: 112 mm