Used Espec Ehs-221M Stress Test Kammer for sale (11,560)

Condition: used, Espec Type: EHS-221M Espec (ThermoTec) Stress Test Chamber Overpressure and humidity tests at over 100 degrees Celsius in many different modes. Program capacity of 10 samples with 30 steps per sample. A variety of safety mechanisms: over-temperature/overpressure protection, detection of water supply failure, complete door interlock, and temperature sensor. Saturated temperature range: 105 to 142.9°C Unsaturated temperature range: 105 to 132.9°C Humidity range: 50 to 100% r.h. Nominal pressure: 0.196 MPa at 132.9°C and 100% r.h. External dimensions: Width 740 x Height 1553 x Depth 1000 mm Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm Kedpfxjzd Uy Ds Ag Asdu Other equipment: with rails and grating Test specimen connections inside Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Espec Type: EHS-221MD External dimensions: W x H x D: 860 x 1795 x 1000 mm Test chamber dimensions W x H x D: 355 x 355 x 426 mm 2 x 46 liters Voltage: 230 V 1/N 50 Hz Rated current: 37A Fuses: 250 V, 2 x 3 A Temperature range: +105°C to +142.9°C Humidity range: 75 to 100% RH Temperature stability: ± 0.5°C Kdjdpfxezfy N Tj Ag Aou Pressure range: 0 to 2.0 kg/cm² Heating/pressure build-up time: from 0 to 2.0 kg/cm² in approximately 60 minutes Weight: 390 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Espec Climate testing chamber / temperature testing chamber Espec PL-4J climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / temperature testing chamber Year of manufacture: 2020 Test chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. power consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable entry Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Kjdszntxmspfx Ag Aedu Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Espec Climate testing chamber / Temperature testing chamber Espec PL-4J Climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Testing chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Kodpfxszntuns Ag Ajdu Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable gland Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber / Liquid-to-Liquid Shock Chamber ESPEC TSB-51 Temperature Shock Chamber Temperature range: Hot bath +70 °C to +200 °C / Cold bath -65 °C to 0 °C Approximately 13,611 operating hours Air-cooled For sale is a used liquid-to-liquid temperature shock chamber from the manufacturer ESPEC CORP. The temperature shock chamber is suitable for thermal shock testing, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system operates with a liquid-to-liquid testing process with a movable test basket between the hot and cold baths and features a programmable controller. Technical data: Manufacturer: ESPEC CORP. Type: TSB-51 Equipment type: Liquid-to-liquid temperature shock chamber Operating hours: approx. 13,611 h Temperature range, hot bath: +70 °C to +200 °C Temperature range, cold bath: -65 °C to 0 °C Bath volume: approx. 55 liters Test basket: 150 × 150 × 200 mm (W × H × D) Internal dimensions: 290 × 350 × 520 mm (W × H × D) External dimensions: 1200 × 1785 × 1320 mm (W × H × D) Weight according to nameplate: 800 kg Power connection: AC 400 V / 3-phase / 50 Hz Max. power consumption: 22 A Refrigerant 1: R404A Refrigerant quantity: 2.8 kg Refrigerant 2: R508A Refrigerant quantity: 0.89 kg Equipment: Programmable ESPEC controller with display Liquid-to-liquid temperature shock testing system Movable test basket Hot bath and cold bath Overcooling protection Overheating protection Operating hour counter RS-485 interface Kjdpfx Agez Hb Tyj Aodu ESPEC OnlineConverter PN5-CN Ethernet and USB interfaces Operating manuals as shown in the pictures Application areas: Temperature shock testing Thermal cycle testing Material testing Electronics testing Component testing Automotive Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Device powers on / Controller and display are active Scope of delivery: 1x ESPEC TSB-51 temperature shock chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Kdedpfszizl Rex Ag Aou Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Kedozhkfqspfx Ag Aodu Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Espec Type: EGN28-6CWL Espec, water-cooled temperature chamber Temperature test chamber, N series Kdsdpfx Agezg Tyno Aju Power supply: AC 400 V, 3-phase, 50/60 Hz, 38 A Temperature range: -70 to +180°C Temperature change rate: Heating: 10 °K/min Cooling: 5.5 °K/min Internal dimensions (W x H x D) in mm: 1000 x 1000 x 800 External dimensions (W x H x D) in mm: 1205 x 1920 x 2159 Usable volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg For your safety as a buyer, please note the following: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, ESPEC Type: PL-3KPH ESPEC Climate Testing Chamber / Environmental Simulation Chamber Model PL-3KPH Air-cooled version For sale is a high-quality ESPEC climate testing chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be fully inspected according to the images. The current display shows STOP / ready for operation. Technical data Kodey H H Iuepfx Ag Aedu Model: PL-3KPH Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Internal dimensions (W x H x D): 600 × 850 × 800 mm External dimensions (W x H x D): 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Weight: approx. 350 kg Cooling: air-cooled (no external water connection required) Refrigerant: R404A Equipment / Features Touchscreen control panel Program and constant operation modes BTHC temperature and humidity control Observation window in the door Stainless steel test chamber Internal lighting / Chamber lamp Side cable entry Overheat protection Hour meter integrated Industrial design For your security as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Scope of delivery ESPEC Climate Testing Chamber PL-3KPH Scope of delivery as shown in the images Condition & Notes Condition: used Inspection possible by arrangement. Loading with a forklift can be organized. (Subject to changes, prior sale, and errors in the technical data!) If you have any questions, please do not hesitate to contact us.

Condition: used, Espec Type: PHP - J3 Technical data: Kdodpfx Agozgtahe Aeu Air-cooled Temperature and humidity range: Ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate testing chamber For your peace of mind as a buyer, please note the following: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with refrigerant that complies with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: TS -70/1000-10 For sale: CTS temperature test chamber, model TS -70/1000-10. Cooling: water-cooled refrigeration unit. Compressor has been replaced! Features: Multi-touch control USB and Ethernet interfaces Feedthroughs for test cables, 4 × Ø 125 mm Safety temperature limiter Application areas: Environmental and durability testing Temperature cycling tests (stress screening) Quality assurance and research & development Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, width approx. 860 mm, depth approx. 1100 mm External dimensions: Height approx. 1950 mm, width approx. 1270 mm, depth approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are reserved!) Kdedpfxjziizyj Ag Aeu We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Temperature testing chamber / Stress screening chamber CTS TS-70/200-5/S temperature testing chamber Temperature testing chamber, -70 °C to +180 °C, approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Device type: Temperature testing chamber / Stress screening chamber Test chamber volume: approx. 200 liters Test chamber dimensions: approx. 650 x 400 x 750 mm (W x D x H) Housing dimensions: approx. 920 x 1345 x 1800 mm (W x D x H) Weight: approx. 550 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 8 K/min Temperature change rate, cooling: approx. 6 K/min Max. heat radiation at +20 °C: approx. 3500 W Actual test run according to protocol: Heating: approx. 10 K/min Cooling: approx. 6.25 K/min Temperature test from -70 °C to +180 °C documented Power connection: 400 V 3/N / 50 Hz Power: 10.9 kW Rated current: 15.7 A Protection class: IP22 Refrigerant pre-cooling stage: R404A Refrigerant quantity pre-cooling stage: 2.5 kg Refrigerant cooling stage: R23 Refrigerant quantity cooling stage: 0.6 kg / 15 bar Operating pressure PS: 25 bar Test pressure PT: 20 bar Operating hours according to protocol: approx. 25,977 h Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side access ports as shown in the pictures Insert grid / Test chamber equipment as shown in the pictures Over-temperature test item protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Accessories as shown in the pictures Application areas Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x CTS TS-70/200-5/S temperature testing chamber Kdodpfozf Hi Hox Ag Asu Insert grid / Test chamber equipment Existing documentation / documents Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding possible. Changes, errors and prior sale reserved. We would be happy to answer any further questions by telephone.

Condition: used, Vötsch Temperature Shock Chamber / Shock Test Chamber Vötsch VT 7012 S2 Temperature Shock Chamber Two-chamber system for rapid temperature changes from -80 °C to +220 °C Water-cooled version with a mobile cart and programmable controller For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH. The system is suitable for temperature shock and temperature cycling tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The test chamber operates with a hot and a cold chamber. The test specimen is moved between the two temperature zones using a mobile cart. The system has an observation window, test chamber lighting, and a programmable controller. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Device type: Temperature shock chamber / Shock test chamber Version: Two-chamber system / water-cooled Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -80 °C to +70 °C Temperature deviation (time): ±1.0 K Temperature deviation (spatial): ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber volume: approx. 125 liters Test chamber dimensions: 470 × 410 × 650 mm (W × H × D) Max. load capacity, mobile cart: 40 kg Max. total load capacity, mobile cart: 20 kg Pipe connection: Ø 67 mm Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 1.1 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW Cooling water supply: Inlet pressure: 3 to 6 bar Differential pressure, inlet and outlet: ≥2.5 bar Water connection: R 3/4" internal thread Dimensions: External dimensions: approx. 975 × 2,115 × 1,675 mm (W × D × H) Weight: approx. 1,000 kg Equipment: Two-chamber temperature shock system Hot chamber Cold chamber Motor-driven mobile cart Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Pipe connection Ø 67 mm Water-cooled refrigeration system Signal light Control terminal Accessories as shown in the pictures Application areas: Temperature shock testing Temperature cycling testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VT 7012 S2 Temperature Shock Chamber Control terminal Original operating manual Kjdpfsz Ehrgsx Ag Aedu Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items not explicitly mentioned in the photos are not part of the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We are happy to answer further questions by phone.

Condition: used, Vötsch Type: VT 7012 S2 Water-cooled version Vötsch temperature shock test chamber / environmental simulation system Model: VT 7012 S2 Two-chamber system (hot / cold chamber) For sale is a high-quality Vötsch temperature shock test chamber for rapid temperature change tests in industry, research, and development. The device is in used condition. See pictures for optical condition. Control panel and observation window are included. Temperature data: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate cold chamber: approx. 3 K/min Test chamber: Test chamber volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø approx. 67 mm Dimensions: External dimensions: approx. 930 x 2115 x 1970 mm Electrical data: Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant according to nameplate: R404A: 2.9 kg R23: 1.27 kg Kedpfoy Iyuwsx Ag Aedu Operating pressure ND: max. 22.5 bar Operating pressure HD: max. 25 bar Weight: approx. 1000 kg Equipment / Features: Two-chamber shock test system Rapid temperature change testing Digital control / display Program operation Observation window Cable entry Water-cooled version For your safety as a buyer, the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Scope of delivery as shown in the pictures Condition & Notes: Condition: used Inspection possible by arrangement Loading can be organized (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have on the phone.

Condition: used, Heraeus Type: HT 7012 S2 Temperature shock test chamber, water-cooled Two-chamber design Warm chamber: Kdsdpfxezd R Uwo Ag Aeu Temperature control in the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 11 K/min Cold chamber: Temperature control in the cold chamber ranges from -65°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate: Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber: +50°C to +220°C Temperature range, cold chamber: -80°C to +70°C Test chamber dimensions: Width 470mm, Depth 650mm, Height 410mm External dimensions: Width 930mm, Depth 2115mm, Height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant: R404A / R23 Operating hours: 27,903 hours Weight: 1000 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Kodpfozd R Azjx Ag Asdu Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Kedezh D Rmspfx Ag Aedu Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Year of construction: 2020, condition: like new (used), functionality: fully functional, MED-CONT MODULAR SYSTEM Originally custom-built for medical device manufacturing, the MED-CONT Modular System is a turnkey, relocatable modular technical facility offering approximately 100 m² of high-quality laboratory, production and office space. The system is ideally suited for: Medical device manufacturing Biotechnology and life science companies Electronics manufacturing and assembly Research & Development (R&D) centres Universities and research institutes Start-ups and scale-up companies Pilot production and prototyping Quality control and testing laboratories Pharmaceutical manufacturing support Clean assembly and light manufacturing Contract manufacturing (CMO/CDMO) Engineering and automation companies Humanitarian and disaster response projects Military medical and technical field operations Mobile laboratories and temporary technical facilities The system comprises three 40' High Cube CARU ISO technical containers and one 20' office/administration container, providing a fully integrated and relocatable working environment that can be deployed wherever high-quality technical space is required. Key Features Approx. 100 m² modular technical facility 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Fully insulated construction Heating and air conditioning (HVAC) 220 V / 380 V EU electrical installation Kdjdpfx Ageznmvrs Aeu High-quality LED lighting Ethernet network infrastructure Indoor-stored, outdoor-deployable Modular configuration – containers can be connected or operated individually Built in 2020 Excellent condition Fully functional Typical Applications Medical device manufacturing Electronics assembly Laboratory operations Pharmaceutical applications Research & Development Pilot production Start-up manufacturing Quality control laboratories Corporate innovation centres Technical training facilities Mobile production facilities Mobile technical support centres Humanitarian and disaster response projects Military field laboratories Office Container The integrated office container provides a comfortable administrative workspace featuring: Office area for up to four workstations Meeting table for 5–6 people Heating, cooling and Ethernet network connection Ideal for administration, engineering, project management and customer reception Included in the Sale The sale includes the complete MED-CONT Modular System, consisting of: 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Additional laboratory, production and utility equipment is available by separate negotiation. Business Advantage The MED-CONT Modular System represents a cost-effective alternative to constructing or refurbishing conventional laboratory and technical facilities. It enables organizations to establish high-quality laboratory, production and office space within a fraction of the time required for traditional construction, while maintaining the flexibility to relocate or expand the facility as operational needs evolve.

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! Kjdpfjz Tf D Rex Ag Aodu TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Condition: used, Vötsch Temperature testing chamber / Temperature chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C With viewing window For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature testing, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features digital temperature control, a viewing window, a test chamber made of stainless steel and a side access port for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Equipment type: Temperature testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 4.36 K/min Temperature change rate, cooling: approx. 2.6 K/min Heater renewed Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Permissible operating overpressure: 25 bar Standing pressure: 11.5 bar Power connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A Weight: approx. 140 kg net Equipment: Digital temperature control Temperature regulation Air-cooled design Test chamber made of stainless steel Viewing window Side access port for test specimens Front main switch RS232 interface Connections for external control Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Kdedpsz R Rgyofx Ag Asu Service life testing Aging and stress tests Condition: Used Optical condition according to images Workshop tested with documented functional test Scope of supply: 1x Vötsch VT 7004 temperature testing chamber Design with viewing window Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Ksdoz Rwk Rspfx Ag Ajdu Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Temperature testing chamber / Climate testing chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. The system features a programmable controller, a stainless steel test chamber, air cooling, and a side access for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Device type: Temperature testing chamber / Climate testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 5.44 K/min Temperature change rate, cooling: approx. 4.81 K/min Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Standing pressure: 15 bar Permissible operating overpressure: 25 bar Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A External dimensions according to manufacturer's drawing (W × D × H): approx. 950 × 830 × 757 mm Weight: approx. 150 kg Test specimen access: approx. Ø 80 mm Equipment: Programmable controller Temperature control Air-cooled design Stainless steel test chamber Side access for test specimens RS232 interface RS485/RS422 interface Digital I/O Potential-free contact Program operation and manual operation Application areas: Temperature testing Environmental simulation Kjdpfjz R Nrzex Ag Asdu Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition as shown in the pictures With signs of wear and tear due to age and use Scope of delivery: 1x Vötsch VT 7004 temperature testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone. Kedpfx Aezii Akjg Ajdu

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Kdjdpfxszil T Ee Ag Aou Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Climate testing chamber / temperature testing chamber Vötsch VCS³ 7034-5 climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Kedjz Akcfopfx Ag Aedu Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 7.0 K/min Temperature change rate, cooling: approx. 8.0 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range, temperature: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Interior made of stainless steel Temperature and humidity control Ethernet interface USB interface Cable entry 50 mm Cable entry 125 mm Test specimen protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Visual condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful check Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.