Used Espec Ehs-221Md for sale (216)

Condition: excellent (used), Espec Here we offer an Espec (ThermoTec) stress test chamber. External dimensions: W x H x D: 860 x 1795 x 1000 mm Test chamber dimensions: W x H x D: 355 x 355 x 426 mm 2 x 46 liters Voltage: 230 V 1/N 50 Hz Rated current: 37 A Fuses: 250 V, 2 x 3 A Type: EHS-221MD Temperature range: +105°C to +142.9°C Humidity range: 75 to 100% RH Gedpfxjzfy N Te Afujkc Temperature stability: -+ 0.5 °C Pressure range: 0 to 2.0 kg/cm² Heating/pressure build-up time: from 0 to 2.0 kg/cm² in approximately 60 minutes 390 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Espec We are offering an Espec (ThermoTec) stress test chamber. Overpressure and humidity tests at over 100 degrees Celsius in various modes. Program capacity for 10 samples with 30 steps per sample. A variety of safety mechanisms: overheating/overpressure protection, detection of water supply failure, complete door locking, and temperature sensor. Saturated temperature range: 105 to 142.9°C. Unsaturated temperature range: 105 to 132.9°C. Humidity range: 50 to 100% RH. Nominal pressure: 0.196 MPa at 132.9°C and 100% RH. External dimensions: Width 740 x Height 1553 x Depth 1000 mm. Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm. Gksdpfszd Uy Djx Afuoc Other features: With rails and grid. Test item connections inside the chamber. Type: EHS-221M Scope of delivery: See images. 300 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2020, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2020 For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Features Touchscreen Control Temperature and Humidity Control Program Control Stainless Steel Interior Viewing Window Interior Lighting 100 mm Cable Entry Water-Cooled Condenser Rollers for Easy Transport Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Quality Assurance Electronics Testing Research and Development Godpjzntxmjfx Afuokc Endurance and Aging Tests Workshop Testing The climate chamber has been workshop-tested. Functional test carried out. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Note Collection or shipping via freight forwarder possible by arrangement. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Gkodpfezntunox Afuec Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2018 For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate tests, environmental simulations, material tests, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Equipment Touchscreen control Temperature and humidity control Program control Stainless steel interior Viewing window Interior lighting 100-mm cable gland Water-cooled condenser Castors for easy transport Application Areas Temperature testing Climate testing Environmental simulation Material testing Quality assurance Electronics testing Research and development Endurance and aging tests Workshop testing The climate chamber has been workshop tested. Functional testing performed. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Note Collection or shipping by freight forwarder is possible by arrangement. Subject to changes, errors and prior sale.

Condition: excellent (used), functionality: fully functional, The original specifications for the TABAI ESPEC PVH-210: Specification Value Type Precision industrial oven / clean oven Temperature range Ambient +60 °C to 350 °C Chamber size 580 × 480 × 480 mm (W × D × H) Chamber volume Approximately 134 L External dimensions 770 × 925 × 1290 mm (W × D × H) Power supply 200 VAC, 3-phase, 50/60 Hz Current 17.5 A Shelves 1 standard shelf Gkodpfxeziby Ij Afuec Construction Stainless steel chamber with forced-air circulation Controller Digital temperature controller

Condition: excellent (used), ESPEC TSB-51 Temperature Shock Chamber Manufacturer: ESPEC CORP. Type: TSB-51 Machine Type: Liquid-to-Liquid Temperature Shock Chamber Bath Volume: 55 liters For sale is a used ESPEC TSB-51 Liquid-to-Liquid Temperature Shock Chamber. The system was designed for professional temperature shock testing and is suitable for material and component testing, electronics testing, quality assurance, and research and development. Technical Data: Model: TSB-51 Year of Manufacture: 2013 Operating Hours: 13,611.4 h Temperature Range Hot Bath: +70 °C to +200 °C Temperature Range Cold Bath: -65 °C to 0 °C Bath Volume: 55 liters Test Basket (W × H × D): 150 × 150 × 200 mm Power Supply: AC 400 V / 3 Phases / 50 Hz Max. Current Draw: 22 A Condensation Method: Air-cooled Refrigeration System: Refrigerant 1: R404A Refrigerant Quantity: 2.8 kg Refrigerant 2: R508A Refrigerant Quantity: 0.89 kg Condensation Method: Air-cooled Dimensions: External Dimensions (W × D × H): approx. 1,200 × 1,320 × 1,785 mm Internal Dimensions (W × H × D): approx. 290 × 350 × 520 mm Test Basket (W × H × D): 150 × 150 × 200 mm Weight: 800 kg Equipment: Programmable ESPEC controller with display Liquid-to-Liquid Temperature Shock Testing System Hot bath Cold bath Gkjdpfsz Hb Tyox Afuoc Movable test basket Overcooling protection Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet interface USB interface Operating manuals as shown in the pictures Transport Data: Unit (W × D × H): approx. 1,200 × 1,320 × 1,785 mm Weight: approx. 800 kg Transport as a single unit Condition: Used Unit starts / Display and controller active. Optical condition as shown in the pictures. Scope of Delivery: ESPEC TSB-51 Temperature Shock Chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Availability: By arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), ESPEC TSA-72EL-A Temperature Shock Chamber Manufacturer: ESPEC Corporation Type: TSA-72EL-A Machine Type: Temperature Shock Chamber / Thermal Shock Chamber (2-Zone) Design: Water-cooled For sale is a used ESPEC temperature shock chamber, type TSA-72EL-A. This unit is suitable for reproducible temperature cycling and thermal shock testing in research, development, quality assurance, as well as for testing electronics, automotive components, aerospace parts, and materials. The switchover between the hot and cold chambers is performed automatically via a 2-zone damper system. Technical Data Test chamber volume: approx. 70 liters Internal dimensions (W x H x D): 410 x 460 x 370 mm External dimensions (W x H x D): 1,310 x 1,900 x 1,470 mm Weight: approx. 900 kg Gjdpfxszhkfqj Afuokc Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Precooling temperature: up to -75 °C Heating time: ambient temperature to +200 °C within approx. 15 minutes Cooling time: ambient temperature to -70 °C within approx. 40 minutes Temperature recovery time: ≤ 5 minutes Max. test load: 30 kg evenly distributed Cable entry: Ø 50 mm Compressed air supply: 0.4 to 0.7 MPa (4 to 7 bar) Refrigeration system / Power supply Refrigeration system: Mechanical cascade refrigeration system Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Condenser: Water-cooled Mains connection: AC 380 / 400 / 415 V 3 phases / 50 Hz Max. current draw: 45 A Equipment 10.4" TFT color touchscreen PID temperature control Program memory (RAM/ROM) Trend graph Alarm history RS-485 interface Eco mode Automatic defrost Vertical sliding door Stainless steel test chamber 2 stainless steel test inserts Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulation fan Pneumatic damper switchover Cable entry Ø 50 mm Applications Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Materials testing Component testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply ESPEC TSA-72EL-A Temperature Shock Chamber 2 stainless steel test inserts Accessories as shown in the pictures Scope of supply as pictured. Subject to change, errors and prior sale.

Condition: excellent (used), ESPEC Climate Testing Chamber PL-3KPH Device Data Manufacturer: ESPEC Type: PL-3KPH Design: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from ESPEC. Suitable for temperature and humidity testing. Used in research, development, and quality assurance. Operating Status Display: STOP / ready for operation. Technical Data Model: PL-3KPH Test chamber volume: approx. 400 liters Temperature range: -40 °C to +180 °C Temperature change rate (heating): approx. 3.4 K/min Gedpfoy H H Iuox Afuekc Temperature change rate (cooling): approx. 1.7 K/min Temperature stability (-40 °C to +100 °C): ±0.3 K Temperature stability (+100.1 °C to +150 °C): ±0.5 K Temperature stability (+150.1 °C to +180 °C): ±1.0 K Humidity range: 20 to 98 % RH Humidity stability: ±2.5 % RH Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A Air-cooled (no external water connection required) Weight approx. 350 kg Equipment Touchscreen control panel Program and constant operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable gland Overheating protection Hour meter Industrial design Scope of supply ESPEC Climate Testing Chamber PL-3KPH Scope of supply as shown in the images Service before delivery (optional) Functional test Refrigerant service Leakage test Test run with protocol Condition Used. Condition see images. Note Loading and transport can be arranged upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Gkedpfxozizl Rs Afujc Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: Ambient temperature +10°C to +100°C / 40 to 98% relative humidity Gjdpfxjzgtahe Afujkc Temperature fluctuation: ±0.3 K Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Espec Type: EGN28-6CWL Espec, water-cooled Temperature test chamber, N series Power supply: AC 400 V, 3-phase, 50/60 Hz, 38 A Temperature range: -70 to +180 °C Temperature change rate: Heating: 10 °K/min Cooling: 5.5 °K/min Internal dimensions (W x H x D) in mm: 1000 x 1000 x 800 External dimensions (W x H x D) in mm: 1205 x 1920 x 2159 Usable volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg For your safety as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: Gsdszg Tynjpfx Afuokc 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,709 h, 2011 | Bobcat S100 | Used Skid Steer Loader | 2,709 hours Location: Wisconsin, United States Delivery available to your destination. About this machine: Bobcat S100 skid steer with a Kubota diesel engine (33 hp net / 35.5 hp gross), rated operating capacity of 1,000 lb (457 kg). Cab with heat, mechanical suspension seat, and switchable ISO/H pattern joystick controls. 2-speed drive, manual quick tach, block heater, and foot throttle. ✔ Cab with heat ✔ Mechanical suspension seat ✔ EH ISO-H pattern switchable controls ✔ 2-speed drive ✔ Manual quick tach ✔ 48" general purpose bucket ✔ Auxiliary hydraulics ✔ Block heater ✔ Foot throttle ✔ 27x8.50-15 tires — 40% remaining Key specs: Engine: Kubota V1,505-E2B-BCZ, net power 33 hp (24.6 kW) Emission standard: EU Stage V / EPA Tier 4 Final Rated operating capacity (ROC): 457 kg (1,000 lb) Tipping load: 915 kg Operating weight (rear): 1,860 kg Hydraulic pump flow (loader): 50 L/min System pressure at couplers: 20,700 kPa Max travel speed: 10 km/h Fuel tank: 45 L What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Pre-sale inspection ✔ Instant shipping rates and worldwide delivery Gkodpfx Aszxhyaefusc ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,682 h, 2019 | John Deere 320G | Used Skid Steer Loader | 3,682 hours Location: Indiana, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Skid steer loader with a 69 hp Yanmar diesel engine, enclosed cab with heat and A/C, 2-speed powertrain, auxiliary hydraulics, Power Quick-Tatch, and a 78" high-volume bucket. Equipped with the EH Performance Package, Attachment Performance Package, reversing fan kit, and cold-start package. ✔ Enclosed cab with heat and A/C ✔ Mechanical vinyl suspension seat ✔ 2-speed powertrain ✔ 12 x 16.5 tires ✔ EH Performance Package ✔ Attachment Performance Package ✔ Reversing fan kit ✔ Power Quick-Tatch ✔ AM/FM Bluetooth radio ✔ HD rear grille ✔ Auxiliary hydraulics ✔ Cold-start package ✔ Engine air precleaner kit ✔ 78" high-volume bucket Key specs: Engine power: 69 hp (net: 66 hp) Engine hours: 3,682 hr Operating weight: 3,246 kg Rated operating capacity: 994 kg Tipping load: 1,989 kg Max. speed: 19 km/h (12 mph) Fuel tank: 79 L Hydraulic flow: 78 L/min Engine: Yanmar 4TNV98C Emission standard: EPA Final Tier 4 (FT4) / EU Stage IV Dimensions (L × W × H): 2,850 × 1,700 × 2,060 mm What buyers get with us: Gkedpfsz Elnrox Afusc ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance Gsdpfszycaksx Afuekc - adaptation according to customer needs

Condition: used, Year of construction: 2023, Like new, only used for 8 bales, 1 film pre-stretcher, counterweights, side attachment, top linkage, tires 31x15.50-15, top linkage with drawbar, RDS Expert terminal, automatic function. Gksdpjz Sbkfofx Afuec

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Gjdpfx Afjzgblreujkc Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Condition: used, mileage: 183,267 km, power: 100 kW (135.96 HP), first registration: 07/1991, overall weight: 7,490 kg, fuel type: diesel, axle configuration: 4x4, empty load weight: 6,800 kg, gearing type: mechanical, operating hours: 6,447 h, machine/vehicle number: 3768, Equipment: all wheel drive, crane, differential lock, hydraulics, trailer coupling, 1 used UNIMOG 1450 with PK 9001 EH loading crane Internal number: 3768 Power: 100 kW / 136 hp First registration: 07/1991 Mileage: 187,267 km Operating hours: 6,447 h Unladen weight: 6,800 kg Permissible total weight: 7,490 kg Max. towing capacity: 24,000 kg Electrical system: 24 V Exhaust pipe pointing upwards Front PTO shaft Flatbed: L x W 2,110 x 2,130 mm PK 9001 EH loading crane (like new) Gedpfjfw Txhjx Afuokc Year of manufacture: 2014 (first installation 2020) 3 hydraulic outriggers Hydraulic lifting capacities: 4 m - 2.2 t 5.5 m - 1.4 t 7.5 m - 1.02 t 9.5 m - 0.78 t This offer is subject to change without notice. Errors and prior sale are reserved!

Condition: used, Drawing machine / stretching machine KARL KLINK RSI 2.5 EH Godpfxezwdrvo Afuekc -Pulling force 2500 kg -Stretching speed 1 mm to 9 mm/min (infinitely variable) -Stroke length 800 mm -Max. workpiece diameter approx. 250 mm -Motor power approx. 3 kW -Coolant system -Pulling force indicator -Pulling force limitation -Various guide bushings (see pictures) -Machine feet Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1600 kg Errors and omissions excepted.

Condition: used, New: No Gksdjwuy Abepfx Afujc Part suitable for: trucks VAT/margin scheme: VAT deductible Type number: 2022876/2347769

Condition: new, Year of construction: 2026, functionality: fully functional, power: 23 kW (31.27 HP), pressing force: 200 t, stroke length: 800 mm, operating speed: 200 mm/s, reverse speed: 230 mm/s, table width: 1,000 mm, table length: 1,000 mm, distance table to ram: 1,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, TEHSLA GV200/80 – 200 TON HYDRAULIC DEEP DRAWING PRESS MAIN TECHNICAL DATA - Pressing Force: 200 tons - Blank Holding Force: 80 tons - Maximum Hydraulic Pressure: 250 bar - Hydraulic Cylinders:2 (200T main cylinder + 80T blank holding cylinder) - Main Ram Stroke: 800 mm - Blank Holder Stroke: 250 mm - Maximum Opening Between Tables: 1,100 mm - Rapid Approach Speed: 220 mm/s - Main Working Table: 1,000 × 1000 mm - Blank Holder Table: 650 × 650 mm - Control Panel: SIEMENS SIMATIC HMI 1200 - Motor Power: 22 kW (SIEMENS) - Lubrication: Automatic guide lubrication - Warranty: 12 months MACHINE TECHNICAL SPECIFICATIONS Machine Frame: Heavy-duty industrial steel construction, designed for high rigidity, stability and reliable performance under demanding operating conditions. Hydraulic System: Two-cylinder hydraulic system with a 200-ton main pressing cylinder and an independent 80-ton blank holding cylinder, operating at a maximum hydraulic pressure of 250 bar. Control System: SIEMENS SIMATIC HMI 1200 operator interface for machine operation and process control Operation Functions: - Hydraulic pressing - Deep drawing - Part ejection Safety Light Curtains: Safety light curtain system with 14 mm resolution. Safety Indication: Four-corner LED operating status indication. Safety Operation: Two-hand control system. CE Compliance: Manufactured in accordance with applicable CE safety requirements. OPTIONAL EQUIPMENT & UPGRADES - Remote monitoring and control system - Remote diagnostics, servicing and troubleshooting Gkedjz R Tbtepfx Afuec - Customized tooling and table configurations - Additional automation solutions according to customer requirements CUSTOM HYDRAULIC PRESS MANUFACTURING TEHSLA is a Slovenian manufacturer of industrial hydraulic and mechanical presses. In addition to the advertised GV200/80 model, we manufacture customized hydraulic presses with different pressing capacities, blank holding forces, table dimensions, stroke lengths and technical configurations. Our machines can be adapted to specific production requirements, including deep drawing, pressing and part ejection applications. MADE IN SLOVENIA Manufacturer: TEHSLA Model: GV200/80 Country of Manufacture:Slovenia, European Union Machine Location: Ljubljana, Slovenia Warranty: 12-Month Manufacturer's Warranty Inspection & Test Run: Available by prior arrangement Contact us for further technical information, machine availability, customization options or a quotation. Other press capacities, dimensions and customized configurations are available directly from the manufacturer upon request

Condition: excellent (used), Year of construction: 1999, Used hydraulic rescue set including spreader, cutter, and two rescue cylinders in very good condition. All devices are in excellent optical and technical condition, have no damage whatsoever, and only show minor scratches or other normal signs of wear, which, however, do not in any way restrict the use of the devices – see pictures! The set consists of: - Power unit AMKUS EH 2A-HR, year of manufacture 1999 - Spreader AMKUS M28, year of manufacture 1999 - Cutter WEBER S 140-26, year of manufacture 2007 - Rescue cylinder WEBER RZ-2-1250 - Rescue cylinder WEBER RZ-1-850 All devices are equipped with single couplings. 1 transport case 110x60x90cm, approx. 100 kg Collection is possible during our regular opening hours. Please arrange an appointment! Gkedozn Nnkjpfx Afuec Shipping via freight forwarder is possible for an additional charge. The sale is exclusively to commercial businesses. You will receive an invoice without VAT, as the seller is a public entity. Private buyers have the option to purchase the equipment "on behalf of a customer"; a direct commercial sale to private individuals will not take place! The goods are sold with the exclusion of any warranty or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, or health. Please do not hesitate to contact us at the address provided if you have any questions regarding prices or technical details.

Condition: excellent (used), Year of construction: 2025, Multifunction Safety Tester KT 1880B Multifunctional Safety Tester KT 1880B – Test Automation in 6U The KT 1880B is a compact safety tester in a 19" rack-mount format (5U) and combines all relevant test types in one device: high-voltage test (AC/DC), protective conductor test, insulation test, substitute leakage current test, function test, and continuity test. This enables the KT 1880B to meet the requirements for efficient, safe, and standards-compliant safety testing according to IEC, EN, UL, VDE, and other international standards – ideal for final inspection, manufacturing, and quality assurance. Technical Performance Data - High-voltage test AC: 100 - 5,500 V / 0 - 3 mA - High-voltage test DC: 100 - 6,000 V / 0 - 10 mA - Insulation measurement DC: 100 - 6,000 V / 250 kΩ - 1 GΩ - Protective conductor test AC: 10 - 30 A / 0 - 400 mΩ - Substitute leakage current test AC: 100 - 270 V / 0 - 10 mA - Continuity test DC: 24 V / 0 - 600 mA - Function test / current consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) - Wide-range power supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Operation Thanks to the integrated 4.3" TFT color display with intuitive menu navigation and freely configurable test programs, the KT 1880B enables a fully automated test sequence. The test item only needs to be connected once – no need to change connections. This significantly reduces test times and potential sources of error, making it a clear advantage, especially in automated production environments. Compliance with Standards & Operational Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the requirements of EN 50191 for safety-current-limited devices. As a result, it can also be operated by non-electricians – ideal for companies with mixed testing staff structures. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results – even with demanding test cycles and under production conditions. Typical Applications - Serial production & final inspection - Type testing according to international safety standards Godpjzwlfwefx Afuskc - Production of electrical devices, components & assemblies - Automated testing environments & test benches Flexibility, Safety & Automation Combined The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test types, fully electronic high-voltage technology, intuitive operation, and safety-current-limited design, it meets all the requirements for modern test automation. PLC KT 1880B Safety Tester Year of manufacture: 2025 Manufacturer's price: €6,545.00 gross Calibration: 06.03.2025 Remaining warranty available Accessories A3/1800-K Connection and operating panel + CEE16 Manufacturer's price: €1,318.00 gross Knürr TW 05 Device trolley, pre-assembled with: HL 02 Holder for high-voltage test probes SP 02 / SP 03 HL 81 Holder for protective conductor test probe PE 81-i KH 01 Cable holder Manufacturer's price incl. accessories: €3,300.00 gross Test probe SP02 + SP03 Manufacturer's price: €521.00 gross Protective conductor test probe PE 81-i Manufacturer's price: €311.00 gross PLC D 2012 Test dummy Manufacturer's price: €711.00 gross Rack-mount housing EH 1905-y Manufacturer's price: €653.00 gross Warning light set with LED WL25 Manufacturer's price: €327.00 gross "All from one source: We would be happy to offer you suitable bank financing for your project." More articles - new and use

Condition: used, mileage: 808,000 km, power: 340 kW (462.27 HP), first registration: 04/2016, fuel type: diesel, tire size: 385/65 r 22.5, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,500 mm, total width: 2,550 mm, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, parking air conditioner, parking heater, = Additional Options and Accessories = - 6x2 - Aluminum fuel tank - Digital tachograph - Lift axle - Air suspension - PTO (Power Take-Off) - Radio/CD player - Sleeper cab - Bowl - Sun visor = Additional Information = General Information Cab: Spacecab License plate: 99-BHF-1 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Front axle: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 35%; Tire tread depth right: 35%; Suspension: Leaf spring Rear axle 1: Tire size: 315/60 R 22.5; Dual tires; Tire tread depth left inner: 35%; Tire tread depth left outer: 35%; Tire tread depth right inner: 35%; Tire tread depth right outer: 35%; Reduction: Single reduction; Suspension: Air suspension Rear axle 2: Tire size: 315/60 R 22.5; Dual tires; Tire tread depth left inner: 45%; Tire tread depth left outer: 45%; Tire tread depth right inner: 45%; Tire tread depth right outer: 45%; Suspension: Air suspension Weights Unladen weight: 19,593 kg Payload: 8,407 kg GVW (Gross Vehicle Weight): 28,000 kg Functional Crane: Yes Gsdpfx Afez Ey Uyeuskc Condition Damage: None

Condition: ready for operation (used), Year of construction: 2010, operating hours: 30,343 h, travel distance X-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details. Gksdpfx Afoz Eai Reuoc - Operating Hours (Main Switch On): 67,030 h 12 min- Operating Hours (Machine Fully Switched On): 45,945 h 26 min- Operating Hours (Automatic Production Mode): 30,343 h 56 min- Main Spindle Running Hours: 18,096 h 58 min- Total Tool Changes: 3,129,425- NC Control Manufacturer: Siemens- NC Control Type: 840D- Main Spindle Manufacturer: Fa. Chiron- Main Spindle Motor Manufacturer: Siemens- Main Spindle Motor Type: 1 PM 6105-2 LZ 84-9 EM 1-Z- 4th Axis Manufacturer: Fa. Peiseler- 4th Axis Type: ZAS160- 4th Axis Counter Bearing: Peiseler GP MK3- 5th Axis Manufacturer: Fa. Peiseler- 5th Axis Type: ZAS160- 5th Axis Counter Bearing: Peiseler GP MK3 - Substructure (Base Frame) Manufacturer: Hamül- Substructure (Base Frame) Type: L- Machine Structure Manufacturer: Chiron- Hydraulics Manufacturer: FMB- Hydraulics Type: 3116265- Cooling Unit (Chiller) Manufacturer: Hyfra- Cooling Unit (Chiller) Type: VWK90-D0- Central Lubrication Manufacturer: SKF- Central Lubrication Type: KAF1-M-W-S3+924- Control Cabinet Cooler Manufacturer: Rittal- Control Cabinet Cooler Type: SK3304142- Extraction System Manufacturer: Umwelttechnik 99- Extraction System Type: LCF-3000- Fire Extinguishing System Manufacturer: Total Walther- Fire Extinguishing System Type: (UE-03)K8- Coolant System 2 Manufacturer: Bürener Maschinenfabrik- Coolant System 2 Type: 001300000170- Chip Conveyor Manufacturer: Knoll- Chip Conveyor Type: 750K-1150/- X-Axis Motor Manufacturer: Siemens- Tool Magazine Chain Motor Manufacturer: Siemens- Tool Magazine Chain Motor Type: 1 FT 6034-4 AK 71-3 EA 1- Tool Magazine Linear Motor Manufacturer: Siemens- Tool Magazine Linear Motor Type: 1 FK 7063-5 AF 71-1 EH 2- Chip Conveyor Screw Motor Manufacturer: Bauer- Chip Conveyor Screw Motor Type: BS04-71V/D06LA4

Condition: used, Year of construction: 2007, functionality: fully functional, SE-HSM-40/26-COMPACT-PLUS Horizontal four-head welding machine 2MC Horizontal CNC corner edging machine, motion control WST-30 Horizontal turning station Minimum element size 320 × 320 mm Maximum element size 4,000 × 2,600 mm Maximum element weight 80 kg Gkedpfjzm N Nrox Afujc Minimum working area 320 × 320 mm Maximum working area 4,000 × 2,600 mm