Used Eubama Rotary Transfer Machine for sale (75,712)

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Kedpfx Asw Hglmjg Ajdu

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Kdjdpjdg Da Iofx Ag Aou Year 1988 Pristine Condition Not been used for 15 years

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 61062, bar passage: 24 mm, TECHNICAL DETAILS Spindle bore: 24 mm Bar loader Model: IEMCA PRA52 F33 Year of manufacture: 2004 Maximum bar length: 3300 mm Maximum bar diameter: 9.1 mm Control system: Siemens S7-200 Drive for parting unit Stroke per slide: 7.15 mm Actuation angle: 26.565° Facing chuck PKD 80 MACHINE DETAILS Operating voltage: 230 / 400V Frequency: 50 Hz EQUIPMENT Nordmann tool monitoring with touchscreen Tool Monitor Chip conveyor (Knoll 500 K-1/450, year 2004) Oil filtering system (Knoll FKA 150) Scraper conveyor with coolant system High-pressure unit FKA / 250 Tubes with coolant connections Hydraulic unit Central lubrication Hydraulic schematic and accessories Pressure intensifier HC3 - 4.0 - B Deflection plate T-T Pneumatic accessories (for 4 cylinders) Compressed air service unit DA 300 Clamping plate for chuck TK420 Oil distributor 2-jaw chuck (Röhm, ID no. 431074, stroke 4.25 mm) Cut-off saw with gear transmission Clamping flange (diameter: 100 mm) Spindle unit complete with toothed belt drive Coolant supply Cover plates for empty stations Material stop (stroke: 60 mm) Parting unit extended by 35 mm Measuring system Z-axis Ksdsyx Ia Njpfx Ag Asdu Spindle unit with hydraulic NC-axis Device for rinsing the clamping jaws Change parts for material clamping Stops for hydraulic unit carrier Change parts for bar loading magazine Tools Tool holders Additional clamping with collet Further details about the machine can be found in the attached documents.

Condition: ready for operation (used), A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transfer. 7) Hydraulic system. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and interlinked system for NC control valve production. The production of additional components can presumably be set up. Documentation available. An on-site inspection is possible. Kdedozbl N Sspfx Ag Asu

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Kdedpfoi Ew Dpex Ag Aeu

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Kedpfx Aop S Sq Deg Aodu

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Kodpfx Ageu T Rhbs Ajdu

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Kodpfxjw Emx Rj Ag Aodu

Condition: used, Year of construction: 2006, machine/vehicle number: HB45, functionality: fully functional, Year of manufacture 2006 / revision 2009 Connected load 40 KW Machine weight 9650 kg Processing units 12 Kjdpsvt Ummefx Ag Ajdu horizontal 12 vertical 6 Total units 18 Circular indexing 0.7 seconds Number of collets 12 Type B45 Maximum clamping 45.00D diameter Length of workpieces max 170 mm Hydraulic unit 10L/Sp-30ccm/4Kw/NG 150 Control cabinet / gallows + pendant control OP 10C Loading magazine 4.20 M Platform Coolant system Exhaust nozzle Stairs

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Ksdeu T Rg Ropfx Ag Ajdu

Condition: new, Year of construction: 2026, functionality: fully functional, Flexbility: Our Rotaflex machines stand out due to their exceptional flexibility, surpassing that of competitors. These machines are versatile, capable of performing a variety of operations including turning, milling, threading, and recessing. Each station operates independently with up to 5-Axes, ensuring efficient and precise machining. Advanced Turning Capabilities: Rotaflex machines are designed for real turning operations, featuring chucks that can simultaneously position on the B axis and perform turning at speeds up to 6,500 RPM. Please find the demonstration videos below: Innovative Plug-and-Run Chucks: Our Plug-and-Run Chucks enable swift chuck changes within seconds, allowing for seamless transitions between jobs. This technology sets Technica apart in the rotary transfer machine industry. Why Choose Technica Rotaflex Machines: Kdedpfx Aeyg Nwdsg Aju Technica machines offer unparalleled versatility and precision, making them ideal for mass production environments that demand high-quality and adaptable machinery. Combining Swiss engineering precision with the multifunctionality, our machines provide reliable and efficient performance.

Condition: used, Year of construction: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of Manufacture: 1971 Weight: approx. 4,500 kg General Information / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling operations in workpieces, with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 3 – Vertical drilling unit, type: BE VK, collet chuck mounting Station 4 – Horizontal drilling unit, type: BE VK, spindle mount: sleeve Ø 36 mm Kdedpfx Agow E Hpvj Aju Station 5 – Vertical spindle unit, type: BE VK, spindle mount: sleeve Ø 28 mm Station 6 – Horizontal drilling unit, type BE VK with additional guide, spindle mount: sleeve Ø 28 mm Station 7 – Horizontal drilling unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 36 mm Station 8 – Vertical spindle unit, type: BE VK, power 2.2/3 kW, spindle mount: sleeve Ø 28 mm Drilling feed: mechanical feed via quill Rotary indexing table: mechanically indexing, 8 positions, Ø 500 mm Workpiece clamping: manual via collet Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / connected load: 380 Volt, 50 Hz Accessories / Special Equipment: • Machine is designed for high-volume production • Features a robust cast machine table with chip conveyor to the rear and a separate large coolant tank • Extensive range of clamping devices and auxiliary tools included • The machine is equipped with a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Extremely stable machine bed, also ideally suited for rebuilding as a special-purpose machine

Condition: excellent (used), Year of construction: 1995, High-performance rotary transfer machine, specifically designed for the mass production of medium and large-sized parts. Thanks to reduced production times, high precision, and reliability, it contributes to greater efficiency in the mechanical machining sector: it can perform up to 15 machining operations, transverse machining operations, or front-side machining operations on both sides. Ksdpfx Ajznnpmsg Asdu

Condition: good (used), Year of construction: 2002, The EUBAMA S6 is a 2002 model bench-type machine. Number of clamping (jaw) stations: 8 2-jaw chuck system Maximum clamping diameter: 40 mm Maximum workpiece length: 330 mm Maximum output (cycles/minute): 40 Hydraulic clamping system Machine control: CNC Siemens SINUMERIK Number of processing units: 15 FMB MT/42/4200/B driver magazine Magazine loading capacity: 4.2 meters Kedjv Ef N Aspfx Ag Aodu KNOLL chip conveyor KNOLL coolant tank (VRF 250/1250) The machine is in working condition.

Condition: good (used), Horizon RD-4055 Rotary Die Cutting Machine The machine is in perfect condition, has low mileage, and is ready to work. Machine setup is via the control panel. Kedpjz R Iq Uofx Ag Asdu Made in Japan. The set consists of: – FFU-4055 sheet feeder – RD-4055 rotary die cutter with double magnetic cylinder (top and bottom) – SPC-4055 separator Manufacturer’s description: – Cost reduction thanks to multiple die reuse, – Machine operation via TOUCH & WORK touchscreen, – Short machine setup time, – Precision and excellent final product quality, – Very easy and quick die assembly on the magnetic cylinder Technical data: – Maximum sheet size before processing: 400 x 550 mm – Minimum sheet size before processing: 200 x 275 mm – Processed material: standard paper, coated paper, and cardboard – Material thickness: 188 to 400 g/m² – Feeder stack height: 500 mm – Production speed: 6,000 cycles per sheet hour Factory set of tools and accessories, instructions.

Condition: like new (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: HZQJ240620819, type of input current: three-phase, overall weight: 3,500 kg, input voltage: 380 V, table width: 2,000 mm, roll diameter: 470 mm, product width (max.): 1,800 mm, working width: 1,900 mm, Hongzhong Sublimation Calender (Rotary Heat Transfer Press) For sale: Professional dye-sublimation/rotary heat transfer machine by Hongzhong Machinery. Designed for heavy-duty industrial operation, offering high efficiency, reliability, and precision. Key Features & Advantages: Heating System: Thermal oil-heated drum system, ensuring uniform and stable temperature distribution across the entire cylinder surface. Kdjdpfx Aoz Szc Heg Aou Control: Intelligent PLC touchscreen interface (WEINVIEW) with multilingual support and an over-temperature alarm. Functionality: Automatic felt/blanket tracking alignment and inverter-driven variable speed control. Safety: 4 emergency stop switches and an automatic cool-down function with auto shut-off once the temperature drops below 80°C. Applications: Ideal for the textile industry – supports both roll-to-roll continuous transfer and piece-by-piece (cut parts) production. Technical Specifications & Equipment: Power Supply: 3-phase (380V) Heating Time: Approx. 45 minutes Equipment: Heavy-duty work table, protective tissue/paper tensioning systems, and finished material take-up/rewind system. Easy to operate and maintain, engineered for long-term commercial use.

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Kdodpew H I R Rsfx Ag Aou Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 Kjdpoy Nkhdefx Ag Aedu 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: used, Year of construction: 1963, functionality: unexamined, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical thread-cutting unit Feed of the drilling units: mechanical feed via quill Drilling heads: single-spindle Tool diameter: approx. Ø3 mm to Ø8 mm Kdjdpfx Agowyn S Ue Aou Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø 2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special features: • The machine is designed for large-scale production • The machine features a sturdy machine table with chip discharge to the underside of the table center with a separate large coolant tank • Extensive set of clamping and auxiliary devices included • The machine is equipped with a 6-station rotary indexing table

Condition: ready for operation (used), Year of construction: 2011, DELTA LC 500 – Circular table grinding machine - CE marking - Year of manufacture 2011 - Magnetic table – Rotary table 500 mm - Max. grinding diameter 500 mm - Distance column – grinding spindle axis 315 mm - Grinding height max. magnetic clamping plate – grinding wheel 215 mm - Grinding spindle speed 2840 rpm - Fine adjustment via micrometer 0.01 mm Ksdpszkvz Nofx Ag Asdu - Coarse adjustment (height adjustment) motorized via keyboard - Spindle motor 3 kW - Dimensions of the grinding wheel 200x80x78 mm - Machine enclosure - Coolant system - Documentation Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight 800 kg Errors and omissions excepted.

Condition: used, Rotary transfer table, rotary indexing table with 16 stations Rotary transfer machine + hydraulic press TOX Rotary transfer machine, special-purpose machine with several assembly stations Manufacturing and assembly system using a rotary transfer process From the special-purpose machine manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 Kdodpfx Ajgd D U Esg Aeu - large rotary indexing table WEISS, type TC500, with 16 stations - pressing station with TOX power unit - vibratory conveyor - conveyor belts - inspection stations - some stations are still visible in the pictures but have already been dismantled Space requirement L x W x H approx. 3500 x 2750 x 2300 mm Weight approx. 3000 kg All in like-new condition - The system has never been used in series production.

Condition: ready for operation (used), functionality: fully functional, DELTA LC 400 / Rotary table grinding machine -Max. grinding diameter 400mm -Magnetic chuck -Grinding height / distance between table and grinding wheel approx. 230mm -Spindle speed 2850 rpm -Fine feed 0.01mm -Distance between column and grinding wheel axis approx. 320mm Ksdjz Nkf Eopfx Ag Aedu -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure -Coolant system -Documentation Dimensions: L x W x H 1.2 x 0.8 x 1.8 meters / Weight 700 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2011, A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 110mm, max. workpiece length: 350mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. The machine has an unknown defect. Documentation available. An on-site inspection is possible. Kdsdpfx Agjy Nm U Ho Asu

Condition: ready for operation (used), Year of construction: 2005, A horizontal CNC rotary transfer machine Sinico for tube and bar processing is available. Throughput capacity: approx. 2500pieces/h, max. cutting capacity: 81mm, max. workpiece length: 340mm, max. tube diameter: 81mm, max. bar diameter: 40mm, tool holder: HSK-63, machine weight: approx. 16000kg. Documentation available. An on-site inspection is possible. Kdsdoy Nm U Tjpfx Ag Aeu

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Kjdpfx Agou Ivc Ns Aodu Price for the tools: 97,500 EUR