Used Eurobin Wash Frame for sale (13,829)

Year of construction: 2021, condition: excellent (used), Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph Nedsnbdtiepfx Ai Tewn

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Nwodjztaufjpfx Ai Ten

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Manual colour registration Web guiding control One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Units for web-turning, peel-off, lamination included Nwjdpfx Aiexrdb Hs Tjn Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Nsdpfozylxisx Ai Tjwn Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: good (used), Year of construction: 2023, Vegetable washing machine for vegetables in bundles, with leaves, in crates or loose Consisting of: Infeed elevator 240 x 60 cm Frame and chassis in stainless steel Two-ply PVC belt, width 600 mm, fitted with cleats with a height of 40 mm at a pitch of 450 mm Drive by geared motor Cast iron bearings Drive drum diameter 105 mm, steel coated with rubber Return drum diameter 105 mm, steel Washing machine 400 x 60 cmFrame and chassis in stainless steelStainless steel mesh belt with 12 mm opening, width 600 mmDrive by geared motorPVC pipe with an outer diameter of 42.4 mm4 upper spray bars4 lower spray bars1 left side spray bar1 right side spray bar Nwodpfx Aez Rf Ukji Tjn Electrical cabinet with speed controller for the belt and elevator 220 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Nsdpfecmat Ujx Ai Tewn Mechanical compression setting more photos an questions

Condition: new, max. tool diameter 400 mm 0 180 mm operating pressure 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in various sizes and at short notice Designs are available and can be requested on special claims be modified. As a rule, water-based cleaners are used deployed. But solvents are also used in ours cleaning machines. If necessary, the systems can be ex-protected version are delivered. Technical details EMSA ROTATHERM Mini: ----- Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230V Frequency: 50Hz Dimensions ----- Depth: 530mm Width: 650mm Height: 630mm Weight: 48kg ----- Price of the basic machine in the above design: On request! ----- Accesories: ----- Order No.: 1.521 Raised lid/max. Tool length 310 mm Order No.: 1.522 HSK 63 F tool holder for changing with basket Order No.: 1.523 HSK 63 E tool holder for changing with basket Order No.: 1.524 Tool holder for Weinig Powermat to change with basket Order number: 2.006 small parts basket, Order number: 1.504 filter system (0.08m²), Order number: 1.510 pressure gauge, Order No.: 1.511 Electromotive basket drive, Order number: 1.512 mobile frame, Order number: 1,513 rolls, Order number: 1.514 suction device, Order number: 1.516 oil separator / belt skimmer, Order number: 1.518 system completely in stainless steel, Order number: 1.519 nozzles in stainless steel, ----- Nwodpfx Aeyrtytji Tsn Price on request The ROTAHTERM tool washing machine is also available in larger versions Standard, Maxi and XL available. All devices are also available in special voltages. Surcharge on request. When ordering accessories, the specified technical data and possibly the delivery time! The values ??given are guide values. Construction changes reserved. Delivery time: short term and after Agreement. All prices ex works plus packaging, transport, insurance and legal VAT. (technical information according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Nwedpfxoz Rztvj Ai Ton Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, functionality: fully functional, For sale: a window and door pressing machine, model Junior, manufactured by the Italian company Casolin. Bale pressing machine. Nwjdozzn Dwepfx Ai Ten Working area: 3000 mm (width) x 2500 mm (height). The machine is in good working order. We have the instruction manual in English. Export price – domestic price + VAT. Transportation is the responsibility of the buyer; loading is the responsibility of the seller.

Condition: like new (used), Year of construction: 2020, Equipment: documentation/manual, BRINOX BWS 912 – Pharma-GMP Pallet Washing System – Year of Construction 2020 – Like New For sale is a high-quality pharmaceutical pallet washing system from BRINOX Process Systems, model BWS 912, year of construction 2020. The system has been used very little and is in excellent, almost new condition with minimal signs of wear. It was specifically developed for the automated cleaning, rinsing, drying, and cooling of plastic pallets under high pharmaceutical hygiene requirements. Nedj Afmr Espfx Ai Tswn The machine is manufactured in high-quality stainless steel and features a modern SCADA control system with recipe-controlled cleaning programs. Technical Data Manufacturer: BRINOX d.o.o., Slovenia Model: BWS 912 Year of Construction: 2020 Serial Number: 1003187 Project Number: B-0001187 Condition: Like New, barely used Chamber internal dimensions: approx. 900 × 1,200 × 1,200 mm Maximum chamber load: approx. 150 kg Drying temperature: 80–120 °C Electrical connection: 400 V / 50 Hz Connected power: 39 kW Rated current: 59 A Protection class: IP54 Compressed air supply: 6 bar Sound level: below 85 dB(A) Water connection: DN25, 2–6 bar Exhaust connection: DN150 Cleaning and Drying System Fully automatic, recipe-controlled washing programs Rotating spray arms and special nozzles Integrated cleaning agent dosing Automatic rinsing and post-rinsing processes Integrated hot air drying Automatic cooling phase Heat exchanger for temperature control of the process air Cleaning rack for up to 4 plastic pallets Pallet format: 1,195 × 795 × 160 mm Control and Automation Siemens IFP 1500 multi-touch control panel SCADA process visualization Automatic and manual operating modes Recipe management and process reports User management and access control Audit trail and electronic signature functions Alarm management and process monitoring The control concept was developed in accordance with GAMP 5 and FDA 21 CFR Part 11. Equipment and Scope of Delivery Stainless steel washing and drying chamber Automatic sliding door with inflatable door seal Special pallet cleaning rack Stainless steel transport trolley Washing pumps and dosing system Heating, drying, and ventilation components Control and operating unit Associated pipelines and stainless steel components Technical documentation Extensive manufacturer documentation is available: Factory Acceptance Test (FAT) Operating and maintenance manuals HMI and SCADA user manual Maintenance plans and checklists Technical drawings and layout plans Electrical and pneumatic documentation Spare parts lists and material certificates Cleaning and loading instructions Testing and deviation protocols Condition and Availability The system was manufactured in 2020 and has been used very rarely. Due to the short operating time and the excellent condition, it can be classified as like new. The machine is currently disassembled and stored. An inspection is possible by appointment. Location: 42699 Solingen, Germany Price: Upon request We will gladly provide further information and technical documents. Subject to prior sale.

Condition: excellent (used), Year of construction: 2015, Vertical glass washing machine Maximum glass height: 2500 mm Working direction: from left to right 6 brushes Glass thickness: from 3 to 19 mm Minimum glass size: 300 x 50 mm Nwodpfe Afnprsx Ai Ten More technical information can be found attached as Tech. data file Excellent condition ! As is Available immediately

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. Nedpfs Aa A Eqjx Ai Tjwn 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: good (used), For sale: HESS frame press pneumatic, retrofitted with pressure booster control max. press length approx. 355 cm in good condition, from a small carpentry workshop. Nwjdpfx As Af Humsi Tsn

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Nsdez Azz Eopfx Ai Tswn Output capacity 750kg p/h

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 100 h, input voltage: 415 V, input frequency: 50 Hz, pressing force: 120 t, stroke length: 500 mm, table width: 1,300 mm, table length: 2,500 mm, throat depth: 1,000 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 1,000 mm, total length: 3,000 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 2,900 kg, Equipment: CE marking, SCM Sergiani PF Cold Platen Press, New 2021, Model PFH DIGIT 25/13 Platen area 2500 x 1300 mm, with 6 x 90 mm dia chromed hydraulic cylinders giving 120 tons pressure via a double rack and pinion Nodpfx Ae Ad Hatoi Town system connected by a torsion bar to grant a planar movement of the movable press platen. Controlled by Siemens colour touch screen control panel. Suitable for pressing plasics, composites, wood inc door panels etc and some light sheet metalwork.

Condition: used, Polzer frame press – hydraulic, with 4 press plungers and lateral pressure device For sale is a robust Polzer frame press from the machine engineering sector, manufactured in 1992. This press is ideally suited for the production and gluing of wooden frames, doors, window frames, and other frame constructions in carpentry and joinery applications. The four hydraulic press plungers are particularly noteworthy, as they enable uniform pressure distribution and support the precise gluing of frame constructions. The additional lateral pressure device allows the workpieces to be aligned and compressed laterally. This allows frames to be glued together accurately and at right angles. Equipment and advantages - 4 press plungers for uniform and targeted pressure distribution - Hydraulic pressing device for powerful and comfortable operation - Lateral pressure device for compressing and aligning the frames - Robust, solid steel construction - Versatile for use with various wooden frame constructions - Ideal for carpentry shops, joineries, and wood processing companies Technical data - Manufacturer: Polzer Maschinenbau GmbH, Herborn - Machine type: according to the nameplate, probably RP 30/21 - Year of manufacture: 1992 - Drive: hydraulic - Mains connection: according to the nameplate, 380 V - Motor power: according to the nameplate, probably 1.5 kW The Polzer frame press impresses with its robust design and the practical combination of four press plungers and a lateral pressure device. This is an interesting machine for anyone who wants to glue frame constructions efficiently, precisely, and reliably. Nodpfe Abbd Isx Ai Tjwn On-site inspection (Luxembourg) is possible by appointment. The price is gross for net within the EU outside of Luxembourg, meaning 0% VAT.

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus Nodpfxjz R Uvxe Ai Tswn 350 mm, with numerous frame saws and grinding machines.

Condition: good (used), Briand TREMPLS – Crate-Based Leafy Vegetable Washing Machine – 2014 Manufacturer: Briand – France Model: TREMPLS Year of manufacture: 2014 Industrial vegetable washing machine manufactured by Briand (Claire Fontaine S.A., France), suitable for professional vegetable processing and food production facilities. The machine uses a single-line immersion washing system in which crates are fully submerged in water. Vegetables are washed using an air-bubble system and rinsing process. Specifications - Type: TREMPLS - Year: 2014 - Condition: Used, sold as inspected - Manufacturer: Briand, France - Machine type: Crate-based leafy vegetable washer - Construction: Stainless steel - Overall length: 975 cm - Overall width: 130 cm - Overall height: 1180 cm - Throughput: Approx. 270–1,300 crates/hour - Electrical supply: 380 V, three-phase, 50 Hz - Listed electrical power: 3 kW - Air-bubble system: 200 m³/h, 1.5 kW - Maximum crate dimensions: 600 × 400 mm - Crate height: 160–320 mm Features Nwjdpfx Aij Aa Hzpj Tjn - Air-bubble washing bath - Adjustable speed - Heavy-duty industrial construction - Long stainless-steel washing tank - Integrated conveyor system - Water circulation connections and washing equipment - Suitable for professional vegetable processing operations - Single-line immersion washing tank - Ideal for family farms and agricultural businesses - Suitable for most standard crate sizes More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), functionality: fully functional, LIMAS AB / VEB L-1048 & Type 6-76 | Line for slicing (dicing), washing, and weighing vegetables Manufacturer: Limas AB / VEB Maschinenfabrik Bad Gottleuba Model / Type: L-1048 complete with VEB Type 60 drum washer Serial number: L-10-8-01 (slicer) 1204 (VEB washer) Year of manufacture: 2008 (Limas slicer) Power supply: 380 V, 50 Hz VEB washer: power 1.1 kW, protection rating IP44 Line composition: - Limas AB potato slicer (type: 6x76) Serial number: L-10-8-01 Year of manufacture: 2008 Plastic (mesh) belt Belt width 850 mm Scraper height 50 mm Distance between scrapers 90 mm Plastic roller width 720 mm Cutting system consisting of 6 knives Distance between knives 115 mm Overall dimensions: 3150 x 1550 x 2370 mm. - Belt conveyor Plastic belt Belt width 520 mm Overall dimensions: 2080 x 800 x 980 mm. - Vertical screw conveyor Lifting height 1600 mm Overall dimensions: 1900 x 750 x 2900 mm. - Mobile VEB drum washer Type: 60 Serial number: 1204 Power supply: 380 V, 50 Hz Power 1.1 kW Protection rating IP44 Drum width 470 mm Perforation diameter 10 mm Overall dimensions: 1250 x 1100 x 1790 mm. - Weighing system: - Belt elevator with scrapers Belt width 350 mm / 220 mm Scraper height 50 mm Distance between scrapers 90 mm Lifting height 1700 mm - Systec industrial scale (type: IT3). Dimensions: 770 x 440 x 520 mm. Overall system dimensions: 3200 x 1000 x 2130 mm. Nedpfx Aisz Sfg Ds Town This technological line is a fully automated, synchronized sequence of machines designed for the comprehensive preparation, slicing (dicing), intensive washing, and precise weighing of root vegetables, with particular emphasis on potatoes. The system finds wide application in food processing plants, large commercial kitchens, and vegetable processing facilities of the "marktfrisch" type. The technological process begins with feeding the raw material onto an elevating belt and a precision rotary-knife slicer from Limas, which, thanks to its 6-knife arrangement, ensures perfectly even cutting. Subsequently, the product is transported via conveyors and a vertical screw conveyor to a mobile VEB drum washer, where effective removal of impurities takes place in the drum with 10 mm perforations. The final element of the line is an integrated weighing system, which feeds the raw material directly onto a Systec IT3-controlled scale, guaranteeing full portion control and repeatability of the production process.

Condition: good (used), Stainless steel 4,650 x 750 x 2,200 mm (L x W x H) Njdpfx Ais Ab H N Ne Tswn -20% discount when picking up the item at the Erfurt location by October 30, 2026.

Condition: used, For sale: vegetable washer/rinsing machine, used in a green bean processing line. Working dimensions: length over 3.5 meters, width 1.25 meters, height 2.8 meters. Housing made of standard steel. Njdpfx Aiewzwwvj Tswn

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 254002, type of input current: three-phase, overall weight: 130 kg, input voltage: 380 V, number of spindles: 8, input frequency: 50 Hz, Schleicher frame dowel hole drilling machine DBH 600, Drilling motor 1.5 kW, 380 Volt, 50 Hz, Drilling stroke 0 - 130 mm, Special drilling gear with 3 rows and 8 spindles, 1 clamping cylinder, Special stop system for window frames and window mullions Weight approximately 130 kg as is, at the Seevetal location, excluding transport, EXW (Ex Works), Njdpfx Aez Nkutei Tjwn subject to prior sale.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Description 100 TON C FRAME PRESS WITH BOTTOM FORCE BACK UP 40 TON Machine is great working condition, was overhauled cilinder, sealings. AWAILIBLE 3 MACHINES BOTTOM FORCE 40 TON Specifications Manufacturer MULLER 100T Model CEZ 100 Year 1979 Condition Used Nsdpovldxisfx Ai Tewn Press force 100 TON Travel up doen 0-560mm Travel bottom up 0-200mm Power 15Kw

Condition: excellent (used), Year of construction: 2007, Vertical glass washing machine Maximum glass height: 3300 mm Nwedpfe Afnq Nex Ai Ten Working direction: from right to left 6 brushes Very good and clean condition As is Available immediately

Condition: used, Year of construction: 1993, pressing area: 3000mm x 1900mm pressing units vertical: 3 pressing units horizontal: 2 pressing system: elctro - hydraulic machine length: 3500mm machine width: 1000mm Nedpfxoy A Hkzo Ai Tswn machine height: 2600mm waight: ca. 900kg