Used Ev Car Stator Assembly Line (2021) for sale (27,499)

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation Nedpfxszc N Axo Ab Relh 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C Nlodjzc N H Dspfx Ab Rsh WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Condition: used, machine/vehicle number: 008708, Position 1: Continuous Cycle Presses BIELE-FRAME ASSEMBLY + PRESSING LINE Njdsztaufjpfx Ab Rslh

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed Njdpfxozhub As Ab Rolh - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 Nodpfx Aoz Rnu Tsb Rolh • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Njdpfx Aszuukqjb Rjlh Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: used, Year of construction: 2023, Assembly Station Manufacturer: PROZAP Type: EK0 Assembly line station Year of manufacture: 2023 Control system: Siemens Technical data: Nledpfx Abjzbvmho Reh - Voltage: 400 V, 50 Hz - Current: 40 A - Power: 15 kW - Operating pressure: 4.5 bar - Weight: 1,600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for press-fitting individual components into a battery cooling plate - Pressing process via pneumatic cylinders and servo motors - Pneumatic suction system for the cooling plate Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Nlsdorq Eawjpfx Ab Rsh

Condition: good (used), Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Electric drive, foot pedal control. Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (2.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a cutout for the hanger Njdpoz Sluzofx Ab Rslh 380V power supply Weight: 195 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Nsdpfxozgayuo Ab Rslh Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor Nljdpfstiy Ntex Ab Rjh 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: used, Year of construction: 2016, Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment. Njdoz I Dc Hopfx Ab Rslh

Condition: excellent (used), Year of construction: 2016, operating hours: 9,001,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. Nsdpfx Ajy Uk A Ssb Rslh VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Njdpfsrn Sqhjx Ab Rslh Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Length (retracted): 6000 mm Length (extended): 18000 mm Band width: 600 mm Njdpfxsglamve Ab Rslh

Condition: used, Length (retracted): 8800 mm Length (extended): 27300 mm Band width: 800 mm Nledpfx Aeglanzob Roh Type: MR3185-800

Condition: new, Year of construction: 2027, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET * OVERHEAD CONVEYOR AND LOAD TROLLEYS Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included Nsdpfxovv Rfdj Ab Rslh We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: used, Year of construction: 2021, Overview Nodpozk U Eyjfx Ab Rslh This compact canning line combines a Wild Goose Quick Change Gosling semi-automatic can filler, a Zomerdijk TWIST can rinser and a Crafted Goose EME automatic labeller (type JE-1100/185-S2) with a Cyklop CM220 thermal inkjet printer. Built in 2021 (filler and labeller), the line runs at up to 600 cans/hour and is compatible with 0.33 L, 0.44 L and 0.5 L can formats (currently tooled for 0.44 L cans). The filler is mounted on a wheeled base frame and includes DO buster and CO₂ regulation equipment as well as low- and high-flow foam control for beers above 4.2 g CO₂/L. The filler's production counter reads approx. 35,000 fill cycles - light craft-scale use. The line is still installed and under power, and can be viewed on request. Technical data - Line type: Small canning line (filler + rinser + labeller) - Capacity: 600 cans/hour - Can formats: 0.33 L / 0.44 L / 0.5 L (currently tooled for 0.44 L) - Filler type: Semi-automatic - Filler electrical supply: 230 V single-phase, 50/60 Hz, 8 A - Foam control: low- and high-flow, for beer >4.2 g CO₂/L - Labeller: EME type JE-1100/185-S2, automatic, with Cyklop CM220 thermal inkjet printer - Recorded use: approx. 35,000 fill cycles (production counter) - Year of manufacture: 2021 (filler and labeller) Scope of Delivery - Can Filler | Wild Goose | Quick Change Gosling | Semi-automatic; wheeled base frame; DO buster and CO₂ regulation; low- and high-flow foam control; tools and basic spare parts kit; format kits for 0.33/0.44/0.50 L cans | 2021 - Can Rinser | Zomerdijk Engineering | TWIST | Infeed buffer on stand, 2 rinse cages, post-rinse collection table; for 0.33/0.44/0.50 L cans - Labeller + Printer | EME (Crafted Goose) | JE-1100/185-S2 | Automatic label application; Cyklop CM220 thermal inkjet coder | 2021 Condition Used - light craft-scale use; still installed and under power at the seller's site. The line can be visited and demonstrated on request. Availability Available now. Location: Spain.

Condition: used, Assembly machine / production line The device was previously used to assemble and press together upper and lower parts. Components include: - Kuka Scara KRC2sr robot, manufactured in 2010 - Pneumatic control system - Electrical control system with frequency inverter - 4 conveyor belts Description of robot type KR 5 scara R350: Nledpfx Ajglp Uysb Rsh Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point of working space: intersection of axes 3 and 4 Weight approx. 20 kg Robot data sheet Control system data sheet You can find more new and used items in our shop! International shipping costs available upon request! Item condition: used

Condition: new, Year of construction: 2014, Siemens SIMOTICS Torque Motor, Stator/Rotor Pre-Assembly, 1FW6090-0PB15-1JC2 Manufacturer: Siemens Series: SIMOTICS Type: Torque Motor, Stator/Rotor Pre-Assembly Model: 1FW6090-0PB15-1JC2 Design: Pre-assembled torque motor (stator/rotor unit) Weight: 28 kg per unit Date of manufacture: 03.12.2014 Serial number example: YFED6 133380 02 002 Origin: Made in Germany Nodpfoyr Abgsx Ab Relh Scope of delivery: Torque motor unit with connection cables and packaging Available quantity: 5 units Condition: NEW, original packaging (NOS)

Condition: used, ZIM Hülsta Body Uprighting Device This body uprighting device is used to upright and further transport assembled bodies. Body uprighting devices are typically used with body presses that have a continuous flow system. It simplifies handling when setting up large workpieces. Transport and assembly device within a body assembly line. Behind a continuous flow body press, the pressed bodies are placed on their back using this device. Assembly work on the underside can thus be carried out. Manufacturer: ZIM Hülsta-Werke Type: Body Uprighting Device Dimensions: Roller conveyor L x W x H: 2800 x 900 x 800 mm Roller width: 800 mm Tilting area: L x W 1000 x 900 mm Nljdpfovdb Ixex Ab Roh Power supply: 3x400 V AC Connected power: 2 kW You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. Nledpfx Abezzp Tts Roh CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Nledpozi Eimefx Ab Rjh

Condition: excellent (used), Max. working width: 55 mm Max. working height: 75 mm Nledpfswrcwvsx Ab Rjh Min. working width: 24 mm Min. working height: 34 mm Length: 14 m Width: 4 m Very good condition.

Condition: excellent (used), Year of construction: 2022, operating hours: 800 h, Equipment: documentation/manual, Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Nedpfjzii N Djx Ab Rjlh