Used Exner H4Sp 340 for sale (2,213)

Year of construction: 1967, condition: ready for operation (used), A four-column stamping press Exner with electronics overhauled in 2011 is available. Press force: 340t, pressure cylinder: 1, pressure cylinder diameter: 380mm, ram stroke: 180mm, stroke adjustment: 100mm, installation height: 400mm, ram diameter: 260mm, table dimensions X/Y: 910mm/610mm, machine dimensions X/Y/Z: approx. 1300mm/1600mm/2950mm, weight: approx. 6500kg. An on-site inspection is possible. Gbodpey Hvqfsfx Almol

Condition: good (used), Year of construction: 1970, pressure 80 t passage width 350 mm stroke 600 mm Gedpfx Alovwgqrjmobl table dimension - longitudinal 400 mm dimensions of the machine ca. 1400 x 1050 x 2350 m

Condition: refurbished (used), Year of construction: 1996, machine/vehicle number: 2269, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 180 mm, operating speed: 300 mm/s, reverse speed: 180 mm/s, table width: 400 mm, table length: 400 mm, table height: 900 mm, distance table to ram: 300 mm, oil tank capacity: 200 l, total length: 1,700 mm, total width: 1,500 mm, total height: 2,700 mm, overall weight: 2,600 kg, installation height: 300 mm, pressing speed: 15 mm/s, Equipment: documentation/manual, safety light barrier, The press was retrofitted in 2010 in accordance with the latest safety regulations. Gbsdpsxyx Absfx Almsl

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t Gsdot Hw Dwepfx Almebl dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 1985, pressure 40 t distance between columns 495 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 300 mm table surface area 490 x 400 mm hole in the table 50 mm table height over floor 950 mm side window 155 mm ram surface 150 mm speed down 480 mm/s speed up 480 mm/s working speed 20 mm/s oil volume 115 l power requirement 7,5 kW Gbsdsyx Imvepfx Almol weight 2,2 t dimensions (WxDxH) 1,35 x 1,1 x 2,2 m with oil-hydraulic drive, upper and lower stroke limitation, mechanical depth stop, two-hand and foot operation

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm Gbodpevut N Njfx Almjl table surface area 700 x 820 mm table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1989, machine/vehicle number: 10131, functionality: fully functional, Manufacturer: Maschinenfabrik Exner GmbH & Co. KG Model: EEX 300 SB-ZR Machine No.: 10131 Year of manufacture: 1989 Press force: 3,000 kN (300 t) Drive power: 80 kW Gjdpfx Aewr Um Aelmjbl Overrun distance: 36 mm Overrun time: 103 ms Hydraulic oil capacity: approx. 2,400 liters Total weight: approx. 47 tons Condition: inspected, videos can be provided upon request. Location: 59227, Ahlen Disassembly and transport to be arranged by the buyer.

Condition: excellent (used), Year of construction: 2002, EXNER Press Gbsdpfx Asy Erlpolmjl EXSBZRD 500/100 Press force: 5,000 kN Tool dimensions: 1,800 x 1,200 mm Max. stroke length: 600 mm Working speed: 16/30 mm/s Rapid traverse speed: 400 mm/s Including feed and transfer unit

Condition: good (used), Rigo Lamibind 340 HM Perfect Binder Machine in perfect condition, manufactured in 2016, with very low mileage. Ready to use. Hot Melt Binder Machine is very quick to set up – controlled via a touchscreen panel. Disc milling. External waste extraction. Instructions included. Gbsdpoy E Ewrjfx Almol Technical specifications: Capacity up to 290 cycles/h Binding thickness 40 mm Max. format 340 x 450 mm Min. format 80 x 80 mm Cover thickness 300 gsm Weight 300 kg Power supply 230V

Condition: excellent (used), Catalogue number 7280 TECHNICAL DATA - track width: 340mm - shaft width: 400mm - max blade diameter: 350mm - blade bore diameter: 80mm - max cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm from above: - pawls - metal slip pressure roller - pawls - metal slip pressure roller - shaft with saw blades - 2 pcs metal slip pressure rollers from below: - guide bar - metal slip roller - pawls - track - electric body lifting 0.55kW - central lubrication Gedpeymnryjfx Almjbl - variable feed speed control 1.5kW - main motor 37kW - dust extraction nozzle diameter: 200mm - overall dimensions (L/W/H): 1800x1670x1780mm - weight approx. 2500kg – German made – Used multi-blade saw, in very good condition Original photos Net price: 76,900 PLN Net price: 18,300 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalogue number 7446 TECHNICAL DATA - Track width: 340mm - Roller width: 400mm - Max. saw blade diameter: 350mm - Saw blade bore diameter: 80mm - Max. cutting height: 120mm - Table width with clearance: 700mm - Table length: 1720mm From above: - Pawls - Metal slip pressure roller - Pawls - Metal slip pressure roller - Shaft with saw blades Godpsyz Tzwsfx Almsbl - Two metal slip pressure rollers From below: - Guide bar - Metal slip roller - Pawls - Track - Central lubrication - Variable feed speed adjustment 1.5kW - Main motor: 37kW - Extraction outlet diameter: 240mm - Overall dimensions (L/W/H): 1900x1750x1980mm - Weight approx.: 3000kg ADVANTAGES – German made – Variable speed control – Insert for short workpieces – Used multi-blade saw, in very good condition Net price: 79,900 PLN Net price: 19,000 EUR depending on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 Gbsdpeyz Dtdjfx Almol - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Gedpjyvgrhsfx Almjbl Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Gbodpfxsuw S A De Almel Table depth: 800 mm mech. depth stop

Condition: good (used), The scope of delivery includes: Gbsdpfoir U Trox Almol 01x shelf connector, used Material color: galvanized Manufacturer: SSI Schäfer Type: PR350/400 total length: approx. 340 mm clear width (shelf distance): approx. 257 mm Hole diameter: approx. 25 x 10 mm profile dim.: approx. U 80 x 50 mm Weight/pc.: approx. 1.52 kg

Condition: used, Year of construction: 1970, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t Gbjdpfxovxltbj Almsl safety light frame ja bei beiden

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, NEW EXNER C-frame press EEX SLL 40 Standard Line LIGHT Year of manufacture: 2025 Pressing force: 400 kN Installation height: 400/450 mm Stroke: 250 mm Table (width): 700 mm Table (depth): 450 mm Gbjdpsw Nx Nhofx Almol Throat depth: 230 mm

Condition: new, Year of construction: 2024, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, EXNER hydraulic single-column press NEW Series EEX SL 40 - Pressing force: 400 kN Gbedpfxet D Ah Ao Almjl mech. depth stop Control: Siemens S7 - 1500 Installation height: 400 mm Stroke: 250 mm Tables: 700 x 450 mm

Condition: new, Year of construction: 2024, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, installation height: 400 mm, Equipment: safety light barrier, EXNER hydraulic double column press EX SLL 40 new machines year of construction 2024 pressing force: 400 kN Installation height: 400/450 mm stroke: 250 mm Table (width) 700 mm Table (depth) 450 mm Godpfx Alsuv Hm Ijmobl

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 60 t, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Height: 2,430 mm Gbodpfoxtpltox Almol Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm Gbedpfxetqqwue Almsl dayligth 250 mm table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: good (used), Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Perforation up to 3 mm in one cycle Quick and easy replacement of perforation strips Possibility of using strips with / without a recess for the hanger. There is a shaker on the delivery. Maximum working width. 340 mm Format / Dimensions min. 120x105mm Format / Dimensions max. 340x340mm Maximum cutting thickness. 3mm Mechanical cycles per minute 80-100 cycles Power supply 380V Weight 1580kg Gbsdpfx Alowt Stvsmel

Condition: used, Manufacturer: EXNER Type: EX 20 Maximum pressing force: 20 t Table size: 480 x 350 mm Maximum tool height: 230 mm Gbodpfx Alexbf Ndemel

Year of construction: 1974, condition: used, Pressure: 340 T Length of stroke: 200 mm Down table size: 100x800 mm Distance between up-down: - open 510mm (daylight) Godpfj Du Uwjx Almjbl - closed 310mm New hydraulic and electric systems

Condition: used, mileage: 480,000 km, power: 255 kW (346.70 HP), first registration: 09/2009, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 6x4, wheelbase: 5,980 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 10,000 mm, total width: 2,550 mm, Year of construction: 2009, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, = Additional options and accessories = - 6x2 - Aluminium fuel tank - Digital tachograph - Lift axle - Air suspension - PTO (power take-off) - Radio/CD player - Sun visor = Further information = Gsdpfx Ajy Rtvyjlmebl Front axle: Tire size: 385/55 R 22.5; Steered; Left tire tread: 20%; Right tire tread: 20%; Suspension: Leaf spring. Rear axle 1: Tire size: 315/70 R 22.5; Twin tires; Left inside tire tread: 20%; Left outside tire tread: 20%; Right inside tire tread: 20%; Right outside tire tread: 20%; Reduction: single reduction; Suspension: Air suspension. Rear axle 2: Tire size: 385/55 R 22.5; Left tire tread: 20%; Right tire tread: 20%; Suspension: Air suspension. Number of cylinders: 6 Engine displacement: 9,365 cc Unladen weight: 18,000 kg Payload: 10,000 kg Gross vehicle weight: 28,000 kg Damages: none