Used Extrude Hone Abrasive Flow Machine for sale (67,341)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: R95-0839, Extrude Hone Vector Precision Deburring and Polishing System, Model 8/6. Capable of polishing large extrusion and forming dies, deburring and polishing precision parts in small to medium batch quantities. Worktable height 46.5", column spacing 28". Maximum opening 22.75", minimum opening 2.75". Media tube diameter 8". Media tube displacement 628.3". Media extrusion pressure 197-844 psi. Media delivery rate 0-2.53 cubic inches per minute. Hydraulic camping force 22.0-29.4 tons. Includes a 5 hp power pack, and an operator panel SPECIFICATIONS: Year: 1995 Serial No. R95-0839 Media Cylinder Diameter…………8″ Media Cylinder Capacity…………628.3 cu.in. Hydraulic Ram Diameter…………6″ Hydraulic Clamping Force…………29.4 Ton Opening Between Tooling Plates – Maximum…………10″ Worktable Height…………46-1/2″ Distance Between Columns…………24″ Compressed Air Required…………58 PSI Bedpfx Ameryv Ixezodf Media Extrusion Pressure…………197 – 844 PSI Media Delivery Rate…………0 – 2,053 cu.in./min. Electrics…………230-460V/3Ph/60Hz Dimensions – Approximate Overall when Closed…………41″(L) x 51″(W) x 106″(H) Weight – Approximate…………5,000 Lbs. EQUIPPED WITH: Allen Bradley Programmable Logic Controller (PLC) 20 HP Hydraulic Power Pack Unit Media Displacement & Cycle Timer Counters

Condition: good (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, warranty duration: 6 months, Extrude Hone machine for surface finishing by abrasive paste flow. Paste cylinder diameter 250 mm Bdodpfx Amevkt Uwszof It has a rotating table and paste cooler. It has an upper cylinder closure to prevent the paste from falling at the end of the cycle.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: M1042, Technical characteristics: # Working chamber: 980 × 860 × 900 mm (W × H × D) # Working table height: 935 mm # Mechanical weight: 1900 Kg Electrical Equipment # Power supply: 400 VAC, 3-phase, 50 Hz Bdsdpexx Nkyofx Amzsf # Installed capacity: 30 kVA # Generator output: 450 A / 43 V DC (pulse technology included) Dimensions # Machine Dimensions (L×W×H): 2100 × 2000 × 2600 mm; Equipment consists of: # Main machine, electrolyte filtration system, industrial cooler, electrolyte treatment (CR-6 elimination) Dosing unit for electrolyte stabilization # Control system: Siemens HMI – User-friendly interface: Touch panel with integrated tool menu # Communication module for tooling needs: up to 12 signals # Safety features: Light curtain or sliding door for operator protection # Process monitoring: Real-time data tracking and short-circuit detection Machine status: WORKING # Safety light barrier – needs replacement

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. Bedpfx Aev Awrwjmzjdf + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Bjdpfsrualpex Amzsdf Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: excellent (used), INNOWEP ABREX Hand Abrasion Testing Device Manufacturer: INNOWEP GmbH Type: ABREX Machine Type: Hand Abrasion Testing Device / Abrasion Testing Machine For sale is a used INNOWEP ABREX hand abrasion testing device for material and surface testing. The testing device was developed to simulate hand abrasion and to test the mechanical and chemical resistance of surfaces and materials. It is particularly suitable for testing laboratories, quality assurance, and research and development. Technical Data: Manufacturer: INNOWEP GmbH Type: ABREX Device Type: Hand Abrasion Testing Device / Abrasion Testing Machine Year of Manufacture: 12/2001 Power Connection: 230 V Power Consumption: 0.5 kW Operation: Touch Panel CE marking present Dimensions: Dimensions (L × W × H): approx. 1,300 × 600 × 800 mm Weight: approx. 50 kg Equipment: Touch operating panel Pneumatic testing system FESTO pneumatic components Test fixture Various clamping and holding elements Bodpfxszrfk Aj Amzodf 2 transport cases with accessories Additional accessories as shown in the pictures Areas of Application: Material testing Surface testing Abrasion testing Hand abrasion simulation Quality assurance Research and development Testing laboratory Scope of Supply: INNOWEP ABREX hand abrasion testing device 2 transport cases with accessories Clamping and holding elements Additional accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplate present. Availability: by arrangement. Scope of supply as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction max.degree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights Bdodpowrh H Nofx Amzef *

Condition: used, Delapena Speedhone Model: ‘E’ Electronic (M) Diameter Range: 1.143-79.375mm Bdodezlg Dqepfx Amzsf With lots of tooling Dimensions: 1200 x 1200 x 1600mm high Weight: 410 KGS

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 31.212.003.252, total height: 1,800 mm, total width: 2,000 mm, total length: 2,800 mm, overall weight: 2,750 kg, stroke length: 500 mm, workpiece diameter (max.): 250 mm, power: 3 kW (4.08 HP), For sale is a high-quality Fässler AG D250C gear honing machine, designed for the precise finishing of gears. For decades, Fässler has been recognized as one of the leading specialists in honing technology and is known worldwide for its highest precision and process reliability in gear manufacturing. Bdjdpfx Ajzd T Tiomzof The D250C is ideally suited for the machining of spur gears and transmission components in the automotive, mechanical engineering, and drive technology sectors. Thanks to its robust construction, precise CNC control, and proven Fässler technology, it enables excellent surface qualities, reduced noise levels in the gears, and the highest dimensional and geometric accuracy.

Condition: refurbished (used), Year of construction: 2011, operating hours: 15,620 h, functionality: fully functional, center width: 1,400 mm, center height: 500 mm, center height in crank: 500 mm, spindle motor power: 30,000 W, total length: 4,560 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 2,200 rpm, quill diameter: 70 mm, quill stroke: 750 mm, feed force X-axis: 65,000 N, feed force Z-axis: 65,000 N, feed length X-axis: 310 mm, feed length Z-axis: 600 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, workpiece weight (max.): 1,100 kg, input voltage: 400 V, power: 45 kW (61.18 HP), warranty duration: 12 months, The machine is in very good condition and has been completely overhauled by us. We offer a 12-month warranty. Bdedpfozluh Rjx Amzjf We would also be happy to provide installation, commissioning, and training services. Training in metal forming or product development is also available and offered separately. The machine is equipped with a Sinumerik 840 D CNC control system, including playback software.

Condition: used, functionality: fully functional, input voltage: 400 V, Equipment: documentation/manual, Precision cross honing machine Used Sunnen Eclipse EC-3500 CGM-27 Bore diameter – honing range: 1.5 – 165 mm Stroke length – honing length: 6 – 170 mm Bdedpfx Aoyx Dv Hjmzjf Spindle speeds: 200 – 3,000 rpm Stroke rates: 60 – 500 strokes Total power consumption – spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1200 kg Depth: 1.6 m Width: 1.2 m Height: 1.9 m SICK safety light curtain Oil filtration / filter system for the honing oil is integrated – spare filter cartridges – available Horizontal cross honing machine / honing machine, TYPE EC 3500, and operating manual Documentation/manual, nameplate available An inspection while the machine is powered on is possible after prior appointment. Price upon request All technical specifications are subject to typographical errors and changes. Sale exclusively to countries within the EU.

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 218224, Abrasion testing machine from ABREX. The machine is new and was purchased a few years ago. Bjdpszlz Rrofx Amzjdf Operating hours: 0 hours, as we no longer have any use for this machine. Delivery conditions: Self-collection in Königsbach-Stein.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 50/2150, (Please tell us your offer price) Sale only within Europe, incl. Turkey Bjdpfx Amozlxlyszjdf Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 208, workpiece weight (max.): 17 kg, type of input current: AC, spindle speed (min.): 150 rpm, spindle speed (max.): 2,500 rpm, total height: 1,550 mm, total width: 800 mm, total length: 1,450 mm, hone diameter: 50 mm, overall weight: 500 kg, Equipment: rotational speed infinitely variable, For sale is a high-quality Pemamo MDR 140 NC honing machine (year of manufacture 2004) in good and operational condition. Bdodpozb Enzsfx Amzof The machine is ideally suited for precise internal machining in the micrometer range and has been used reliably. Highlights: • Swiss precision machine (Pemamo) • Very high accuracy • Ready for operation – demonstration possible • Robust and durable design The machine is immediately ready for use and can be inspected while powered on after prior arrangement. Sold without warranty, ex works. The machine will be delivered without power and compressed air supply. Payment before collection.

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Bjdpfjt Hwupex Amzodf Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: used, Year of construction: 1984, honing diameter 12 mm stroke 40 mm Bdsdpst Hwvtefx Amzjf throat mm total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg Bodpot Hw T Sofx Amzjdf dimensions of the machine ca. m

Condition: used, Year of construction: 1996, workpiece diameter 240 mm centre distance 0 mm honing length max. 500 mm Bsdpfx Amot Hwvmszedf max. module 5 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Bdjdpfx Ast Hwzpsmzef Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, honing diameter 165 mm stroke 120 mm centre height 100 mm total power requirement 1,5 kW weight of the machine ca. 1 t We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : SUNNEN (USA) Horizontal Automatic Honing Machine model MBC 1804 G year Serial no 1K1-190075 _____ Honing range – Ø with gauge control 1,5 – 51 mm Bdodsw U U Iqspfx Amzjf with automatic stroke 1,5 – 95 mm with manual stroke 1,5 – 165 mm Workpiece honing length max. approx. 400 mm Workpiece honing lengthe with gauge control 254 mm 12 spindle speeds 200 – 2.500 rpm 5 stroke rates 80 – 310 stroke/min Length range of automatic stroke 6 – 120 mm Power of spindle 0,75 kW - 380 V - 50 Hz Total drive appro. 1,5 kW - 380 V - 50 Hz Accessories / Special Features • Automatic Working Cycle with aut. mechanical stroke, aut. hydr.-mechanic Honingtool-feed and aut. cycle stop when the nominal size is reached • Elektro-mechanical gauge control with a probe in the nominal diameter-size mounted opposite to the main spindle, which initiates the cycle stop when the nominal diameter is reached. • Steplessly adjustable honing tool pressure feed • Footswitch for manual operating • Built-in honing oil supply system • Manuals. Unfortunately there is no tooling with the machine Condition : very good, universal machine for all sorts of honing tasks ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 1995, Sunnen Eclipse Bdjdpozl U Evofx Amzof EC-3500 CGM-27 Bore diameter – Honing range 1.5 – 165 mm Stroke length – Honing length 6 – 170 mm Spindle speeds: 200 – 3,000 RPM Stroke rates: 60 – 500 strokes Total power consumption – Spindle drive: 4.1 kW Stroke motor: 1.1 kW Machine weight: approx. 1,200 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. Bdjdpfx Ametqu Diszef AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: good (used), Working range: 1.9 - 100 mm Spindle speeds, infinitely adjustable in 2 groups: 95 - 3500 rpm Drive motor, gear motor: 380 V, approx. 0.55 kW Working height: 1000 mm Bjdpfx Aezibviomzodf Space requirement: 1150 x 800 x 1250 mm Weight approx.: 260 kg

Condition: excellent (used), Horizontal Bdsdpfxezhl Tvj Amzsf Manual With automatic feeds Honing lenght -406 mm Honing diameter 1.5 - 165 mm Spindle speeds 200- 2500 rpm Misc. accessories MARCELS MASCHINEN AG

Condition: used, TECHNICAL DETAILS - Plate - External diameter : 750 [mm] - Internal diameter : 150 - Main motor rotation speed : 4 [kW] - Supply voltage : 380 [V] - Total installed power : 3.6 [kW] Bdjdpfx Amsxb Em Nezof WEIGHT & DIMENSIONS - Machine floor space : 1100 x 1700 [mm] - Machine height : 2000 [mm] - Machine weight : 1100 [kg] - Number of hours : 5160 [h]