Used Eyeleting Machine for sale (65,028)

Condition: good (used), Hang 102-20 Eyeleting machine with base This device is like new, the latest product from Hang. Made in Germany. Technical specifications: 1 head Eyelet diameter: No. 24-25. Inner diameter: 4mm. Maximum capacity: 20 sheets of 80gsm Front and side margins Manual operation The device feeds the Eyelet in the correct direction, punches holes, and crimps the Eyelet in a single pass. Instructions are included. Gjdpfxjy Sfa To Alxeub

Condition: good (used), Hang Piccolo 101-20 Eyeleting machine The machine is in perfect condition and ready to use. Made in Germany. Technical specifications: 1 head Gjdpfx Aloy N Dw Soxsub Eyelet diameter inside the hole: 4 mm. Maximum capacity: 20 sheets of 80gsm Front margin: 40 kg. Foot pedal operation The machine punches, feeds, and crimps the eyelet in a single pass.

Condition: used, machine/vehicle number: 101506, Eyelett Thickness: 5,5 mm Projection 320 mm Activation via foot switch Working height 900 mm Cycle time/performance sec.0.50 sec Width 1,200 mm Depth 900 mm Net weight 420 kg Gross weight 480 kg very good condition Gusdpot Na Ecefx Alxjb short-term available

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Technical specifications: 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets 230V power supply Front and side margins Operation: foot pedal or hand switch. The machine punches and crimps the eyelet in a single pass. Gusdpfx Ajy Hgkpelxjb Automatic eyelet feeding.

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s Gedpfoy Ehl Eox Alxeub The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: excellent (used), 2 heads Rivets dimension 5,5mm Gsdpfx Alepmarksxeub

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, overall weight: 130 kg, total length: 1,200 mm, total width: 780 mm, total height: 1,280 mm, Equipment: foot remote control, TECHNICAL DETAILS Grommet size: 4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 780 x 1,280 mm Net weight: 130 kg EQUIPMENT on castors with foot switch Gsdpjyf A S Eefx Alxoub Note: The machine is sold without a riveting head.

Condition: used, machine/vehicle number: 27977, Ösmaschine - Eyeletting machine Hang 103LOSerial-No. 27977 Online-Video-Inspection by Skype-Video Guedpfeh Axgcox Alxob We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Eyeletting machine Hang 101FSerial-No. 11388 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gjdpfx Aleh Axz Esxeub

Condition: used, machine/vehicle number: 11388, Ösmaschine - Eyeletting machine Hang 103SPSerial-No. 11388 Gsdpfx Ajh Axggslxsub Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 14889, Ösmaschine / Eyeletting machine Hang 103 SP SN. 14889Serial-No. 14899 Fußbetrieb / Foot operation Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gedpfjh Axz Nex Alxsub

Condition: used, pneumatische Ösenmaschine / pneumatic Eyeletting machine Falzoni F401.9.S21 Baujahr / Year 2000 - Serial-No. 3710 Sehr guter Zustand / very good condition Gsdpfev Azt Eex Alxoub Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Automatische Ösmaschine / Automatic Eyeletting machine Hang 103 LOK Serial-No. 24707 Für kleine bis mittlere Serien-Auflagen / For small to medium series-batches Arbeitstiefe / Working depth 130 mm Guedpfxsv D N H Ne Alxsb Stückzähler / Counter Auslösung durch elektrischen Fußschalter / Release via foot switch Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Ösmaschine / Eyeletting machine Hang Piccolo 101 Serial-No. ET107 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Guedpfjxlr Sysx Alxjb On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), functionality: fully functional, Hang eyelet press for foot operation, suitable for standard eyelets No. 24 and No. 25, inner diameter 4 mm Gsdpfx Ajxbcg Tjlxoub

Condition: excellent (used), Offer consisting of: very well-maintained double eyeleting machine by Hang Guodpfjx R E Dcsx Alxjb

Condition: used, Industrial Tempering / Heat Treatment Oven – Lister Machine Tools Guodpfx Alsy R D Tiexob Heavy duty industrial tempering and heat treatment oven by Lister Machine Tools Ltd. Ideal for engineering workshops, toolmaking, heat treatment, metal hardening, tempering and industrial heating applications. Fitted with digital temperature controller and insulated chamber with front loading access door. Suitable for precision heating and workshop production use. Features: Industrial electric tempering oven Digital temperature control Insulated heat chamber Front loading design Heavy duty industrial construction Mounted on steel stand Suitable for tooling and heat treatment work Condition: Used workshop condition with cosmetic wear from industrial use. Complete and operational. Ideal for engineering shops, fabrication workshops, blacksmithing and toolroom environments. Loading available on site. Viewing welcome. Transport can be arranged. Open to sensible offers.

Condition: used, Industrial Sheet Metal Beading / Swaging Machine (Jenny Machine) Heavy duty manual sheet metal swaging and beading machine in solid original condition. Ideal for fabrication shops, restoration work, ducting, panel making. Gsdpjy R Dquefx Alxsub Fitted with adjustable rollers and manual feed controls. Strong cast iron industrial construction mounted on original pedestal base. Perfect for forming beads, swages, strengthening ribs and edging work in sheet metal. Features: Manual hand operated machine Adjustable forming rollers Heavy cast iron construction Original pedestal stand Industrial workshop machine Suitable for steel, aluminium and light gauge sheet metal Condition: Used industrial condition with age-related wear and surface rust. Mechanically complete and turns freely. Ideal restoration or workshop machine. Loading available. Viewing welcome. Open to sensible offers.

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, XYZ 500 LR Vertical Machining Centre (2018) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Gjdpfey R S Unox Alxjub Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79114 Machine Serial Number: SMB0146 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Spindle Speeds 8000rpm Spindle Motor 15hp Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Cutting Feeds 1-20m/min Max. Table Load 300kg T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Godpfx Aey R Srgelxjub Machine Serial Number: MF491 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ SLV Turret Milling Machine Manufactured 2011 Spindle Motor 5 hp Spindle Speeds 70 – 3600rpm Spindle Taper ISO40 Table Size 1473 x 305mm T Slot Size 16mm T Slots 3 off X Axis Travel 1000mm Y Axis Travel 410mm Knee Vertical Travel 413mm Ram Travel 450mm Supplied with: Power Feed Longitudinal (X) Power Feed Cross (Y) Powerd Knee 3 Axis Digital Readout Misc Spindle Tooling Machine Manuals Air Draw Bar We can offer delivery & installation, operator training and warranties. Gusdpfx Alsy R Skcoxeb *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79192 Machine Serial Number: 11501 £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2017) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Indexing Toolpost Machine Handbooks TRAKing®. Guedpfxoy R Rdhj Alxsb Constant Surface Speed. Rapid Traverse with Joy Stick. 3 Point Fixed Steady Travelling Steady Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79001 Machine Serial Number: SLM00072 £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2001, XYZ 1224 Surface Grinding Machine Electro Magentic Chuck 304 x 609mm Max. Longitudinal Grinding Length 609mm Max. Cross Grinding Length 304mm Max. Distance from Table Surface to Spindle Centre 508mm Max. Longitudinal Hydraulic Travel 660mm Longitudinal Travel Variable 5 – 25m/min Cross Travel Automatic Increment 0.1-10mm Cross Travel Automatic Travel 304mm Cross Feed Handwheel Per Revolution 5mm Cross Feed Handwheel Per Graduation 0.02mm Down Feed Handwheel Per Revolution 2mm Down Feed Handwheel Per Graduation 0.01mm Spindle Motor Speed 3000rpm 50Hz Spindle Motor Power 5hp Hydraulic Motor Power 1Hp Standard Wheel Dia. 355mm Standard Wheel Width 38mm Stand Wheel Bore 127m Machine Weight 1700kgs Foot Print (LW) 3550 x 2550mm Supplied with: 2 Grinding Wheels Balancing Unit Coolant & Dust extraction Toolbox Hydraulic Tanks Diamond Wheel Dresser 415V Electrics Machine Pads & Levelling Bolts Low Volt Work Lamp For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79197 Machine Serial Number: 134046 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Gsdpfxey R N Ais Alxeub Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ 1500 Turret Milling Machine (Ex College) 2 Axis Newhall DRO Spindle Taper R8 Spindle speeds to 500 – 3500rpm Gujdpfx Aloy N Ak Rjxob Table Size 1069 x 228mm X – 610mm Y – 305mm Knee Travel: Z – 362mm 415V Electrics Year 2014 Serial Number 103080 Stock Number 2867

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Godpfxox Hp I Rs Alxeub Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady