Used Für Paul Kme 2, Bm Und K2V Spacers, Saw Bushes, Cv-Saw Blades for sale (85,888)

Condition: new, New spacer rings for PAUL KME 2 and BM, with bore diameter 75 mm, outer diameter 120 mm, in widths 41, 30, 26, 22, 20 and 10 mm, new spacer rings for PAUL K2V, with bore diameter 60 mm, outer diameter 90 mm, in widths 40, 30, 20, 10, 2 and 1 mm, Saw bushings for saw shafts with diameters of 60 mm, 50 mm, 45 mm and 40 mm, new hard-chromed CV saw blades in various diameters for KME 2, BM and K2V Iaodpfxeh Anyfj Ahzjw

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Ijdpfxjirmulo Ahzjaw

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Original PAUL saw bushings with effective clamping lengths of 55 mm and 110 mm for the KME 2 and BM Isdpsiimz Ajfx Ahzjaw Original PAUL spacer rings in various widths for S 900 re-cutting saw, outside-Ø 150 mm, bore-Ø 110 mm, with 2 keyways

Condition: new, Sample configuration: 2x 12m worktable 20kW Raycus fiber laser source Boci BLT461T+AB rotary axis FSCUT 9200 system Iaedpfowxvl Tex Ahzsw HL-20000 water chiller Yaskawa servomotor Optional: air compressor

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm pass-through width • Saw spindle newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw spindle diameter • Mechanical height adjustment of top rollers • Integrated chip removal conveyor belt Iedpfx Ahsyudquezsaw • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop-inspected • Machine newly painted • Hydraulic width adjustment •

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings Iodpfx Ahsw Slwkozeaw • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw

Condition: excellent (used), CATALOG NUMBER: 7949 Technical data: - Track width: 380 mm - Shaft width: 420 mm - Max saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max cutting height: 120 mm - Table width with clearance: 1060 mm - Table length: 2050 mm – Top section: - Pawl/anti-kickback row - Metal pressure roller - Kickback fingers - 2 metal feed rollers - Hold-down clamp - Saw shaft - 3 metal pressure feed rollers – Bottom section: - Guide - Kickback fingers - Track - Stepless feed speed adjustment - Feed motor: 1.5 kW - Main motor: 30 kW - Centralized track lubrication Iedpfx Ahozkuawjzeaw - Extraction outlet diameter: 250 mm - Roller tables: 2 pcs 1st table length: 3500/800 mm 2nd table length: 2550/800 mm - Roller width: 700 mm - Table height: 950 mm - Overall dimensions (LxWxH): 2950 x 2000 x 2000 mm - Weight: approx. 3000 kg Advantages: - Made in Germany - 2 roller tables - Used multirip saw - Very good condition Net price: 32,900 PLN Net price: 7,833 EUR Net price calculated at the rate of 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: excellent (used), Original spacer rings 145 Ø x 86 Ø with 1 groove 16.5 mm in various widths, 1 used saw shaft 60 mm Ø with 2 wedges 16 mm wide including 1 sliding bush 120 mm effective clamping length with left-hand threaded clamping nut suitable for right-hand machine and bearing bush for front flap Iaodpfx Ahjwaiaaozjw

Condition: excellent (used), Paul KME 2/1000R Passage/working width: 1000 mm Cutting height: Up to approx. 120–125 mm. Iaodpfx Ahoyxmlkszow Motor power: 18.5 kW Cutting system: movable saw (saw sleeves), computer controlled Feed: Infinitely variable feed adjustment Hydraulic adjustment of the upper roller height.

Condition: good (used), 15 kW motor Cutting height 8 cm Cutting width 40 cm Roller length 4 m x 2 Working width of rollers 43 cm Isdeyzxfuopfx Ahzsaw

Condition: used, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: T28, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, Hello, we are offering a small UV dryer here for drying screen printing and pad printing inks. This compact, mobile dryer is equipped with two mercury UV lamps, making it suitable for common printing inks and coatings. The conveyor belt has adjustable speed and a width of 300 mm. Lamp 1 has 1077 operating hours, and lamp 2 has 682 operating hours. The two lamps can be used individually or together. The base frame is included. However, the dryer can also be easily placed on a table, etc. The rolling base frame was very convenient... and it made the dryer very easy to move around. Power connection: high-voltage, 400V/16A plug. If you have any questions, please feel free to write to us, and we will be happy to help. Iodpfx Ahjzll Rpszsaw

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 3,000 kg, Four-way side loader Ijdpfx Ahju Acuzezeaw Condition: Ready for use and fully functional Technical condition: good Description: Little-used spreader for Combilift CB2500 and CB3000, two units available – one for the 135 cm and one for the 175 cm fork carrier.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,500 kg, maximum load weight: 18,700 kg, overall weight: 26,200 kg, axle configuration: 2 axles, total length: 12,400 mm, total width: 2,550 mm, tire size: 205 / 65 r 17,5, Additional Information Chassis, Saddle, Haulage Company Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins, rear slope to approx. 1920 mm, continuous lashing rail for ramps at the rear and front on the gooseneck, sliding rollers at the rear, low-bed to the axle group after the slope. Drawing approval required from the customer in case of an order! Pair of lashing points recessed in the outer frame at the top and side, 10 tons each. Pair of lashing eyes recessed in the outer frame on the gooseneck, 5 tons each. 24-ton, 2-stage support winch, single-sided operation, with straight lower part, without stroke compensation. Foldable rear support, mounted externally. Wheel chocks with holder. Aluminum side impact protection. Steel underrun protection for EC, if technically possible. Quarter panel fenders. With anti-spray flaps according to EC. 1 pair of wheel recesses recessed in the low-bed area after the gooseneck, sloped for entry. Length at the bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on the rear slope. Depth approx. 200 mm. Note: Frame in the main beam area is 200 mm higher than the wheel recess. A detailed technical review is still required in case of an order. Wheel recess cover retractable from the low-bed with hardwood inserts, on the rear slope with hardwood inserts. Electric winch, 24 Volt, pulling force 5500 kg, mounted in the slope of the gooseneck, does not reach into the loading area, operation with wireless remote control, rope length 35 m x approx. 10 mm, with roller rope guide and detachable guide roller on the rear slope. Axles + Suspension SAF or BPW drum brake axles at our discretion. Air suspension with lift and lower valve + auto-reset function. Wheels and Tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 tons tire load capacity at max. 90 km/h. At the manufacturer's choice. Steel rims in twin arrangement, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. 2 non-interchangeable coupling heads at the front, without connecting line. EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable (brake calculation sent to the customer for approval. 07/15/2021). Attention: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scale). Electrical System Iodpfx Ahoi Ri Hrozoaw 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Floor Gooseneck with steel / checkered plate covering. 30 mm sieve floor, in the low-bed between the longitudinal beams in the middle. In the wheel track area covered with toothed grating, in the wheel recesses with steel / checkered plate covering. Ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg. Pair of steel ramps for entry into the low-bed. Pair of steel ramps for driving onto the gooseneck. Side boards Approval / Signs Country of registration: Germany With DEKRA approval and certificate (according to §13 EC - FGV). Prepared for single-row license plate holder. Contour marking with reflective strips according to ECE R 048, yellow on the

Condition: ready for operation (used), TFT monitor/screen for Deckel, Philips and Maho 432/10, serial number: 153197, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ijdjy Ntbtepfx Ahzsaw

Condition: ready for operation (used), Zoller CH-2501 projector and transmitted light for H4000, used, in good condition, 100% functional, scope of delivery as per photos. Iaedpfx Ajy T Dqtshzjw

Condition: ready for operation (used), Huber Ministat 240 Compact Refrigerated Circulating Thermostat for Laboratory and Industrial Use, SN: 74948/07, used, normal signs of wear, 100% functional, scope of delivery as per photos. Iedpex Etu Ejfx Ahzoaw

Condition: used, mileage: 1,001 km, color: brown, driver cabin: other, gearing type: other, loading space volume: 8 m³, loading space length: 4,400 mm, loading space width: 2,300 mm, loading space height: 800 mm, Vehicle location: Bovenden, steel body, flap, jet drop sides Body: Meiller body NEW approx. 8 cbm, roof protection ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iedjvhg Edspfx Ahzjaw - .

Condition: used, Ferromatik mixing screw Ø 70 mm for IU2495 and IU2650- removed from Ferromatik K-Tec 450 Iedpsyxg Tbofx Ahzsaw - removed from IU2495 - removed from running machine - fully functional- inlet: 69.80 mm - center: 69.80 mm - outlet: 69.80 mm - total length: 225.80 cmmanufacturer: Ferromatik Milacron

Condition: used, mileage: 81,900 km, power: 84 kW (114.21 HP), first registration: 09/2015, fuel type: diesel, maximum load weight: 952 kg, overall weight: 2,800 kg, tire size: 16 zoll, fuel: diesel, color: white, gearing type: mechanical, emission class: euro5, loading space length: 2,400 mm, loading space width: 1,600 mm, loading space height: 1,400 mm, operation weight: 2,000 kg, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, traction control, The vehicle is in excellent technical and optical condition. The vehicles for sale are inspected and repaired in our certified automotive workshop. Non-smoker vehicle. Iaodoi E N Dtepfx Ahzjw Equipment: First owner, ABS, ASR, ESP, driver's airbag, passenger airbag, third brake light, electrically adjustable exterior mirrors, electric windows, headlight range adjustment, fog lights, remote central locking and immobilizer, electric interior locking, air conditioning, hands-free system, onboard computer (MFA), driver's seat with height adjustment and armrest, cup holders, power steering, steering wheel adjustment, multifunction steering wheel, cruise control, front parking sensors, rear parking sensors, navigation system, DAB radio, Bluetooth, sliding door on the right and left, heated rear window with wiper, tie-down points in the cargo area, cargo area lining, wooden cargo floor, tie-down points for cargo, tinted windows, 16-inch tires, DPF EURO5. Total weight: 2800 kg, payload: 952 kg, towing capacity: 2000 kg. Cargo area internal dimensions: length 2.40 m, width 1.60 m, height 1.40 m. We will gladly consider your requests and can carry out various retrofitting work in our workshop: Tow hitch from €800, reversing camera from €600. 1-year Auto Helle warranty according to the warranty certificate. Last oil service at Mercedes with 79,173 km in January 2022. New air conditioning service. Current vehicle inspection. Complete service history or digital service record. Front brake discs and brake pads new. Repair, service, and reconditioning costs are included in the purchase price. Financing possible. Subject to changes and errors.

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Isdpexiza Usfx Ahzsaw

Condition: good (used), Obrzynarko wielopiła Paul Kme2 wysokosc ciecia 125mm szer 750mm silnik 37kw 2 pily ruchome stoł podawczy stol odbiorczy Iaodevn Aunjpfx Ahzow

Year of construction: 1989, condition: good (used), functionality: fully functional, machine/vehicle number: 18678, Used 100,000-liter steel tank Iajdpfx Ahjzaquwszow Year of manufacture: 1989 Located in 79423 Heitersheim Price is negotiable

Condition: good (used), Year of construction: 1983, machine/vehicle number: 8398714, functionality: fully functional, Paul multi-blade saw in good, used condition. K2V800/370/310 - Year of manufacture 1983 The multi-blade saw was used reliably for many years for the production of moldings and is still connected to the power supply. The machine is being sold as part of the closure of our carpentry business. Includes 5 saw blades. Collection price – delivery possible upon request. Iodpfjziuxdex Ahzeaw The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: ready for operation (used), Grundig CNC 36 / 44216-007.00 monitor for Deckel Maho FP4-60, used, in good condition, 100% functional, scope of delivery as per photos. Iajdpfx Aoy Nqayjhzew

Condition: ready for operation (used), Grundig Dialog 12 Deckel Maho control panel / keyboard for FP4-60, used, in good condition, 100% fully functional, scope of delivery as shown in photos Iodpfx Ahoy Nqa Hjzoaw