Used Farmet Oilseed Screw Press for sale (16,146)

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Tsdpfjxa Hy Ujx Afweb Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Year of construction: 2006, condition: good (used), functionality: fully functional, Screw press Farmet FS1000 for rapeseed, soybean, sunflower. Capacity from 800kg to 1.000kg, depending on motor. It is complete, in good condition. Manufactured in 2006 Todpfxjtxc Ite Afwjb

Year of construction: 2006, condition: good (used), Oilseed screw press Farmet FS1000, 55kw long. In a good condition, complete, ready for loading. Capacity up to 1.400kg/h. Tsdpfx Aoxrc Ixsfwob

Year of construction: 2007, condition: good (used), functionality: fully functional, For sale: complete Farmet two-stage cold oil pressing line for rapeseed and sunflower seed. Manufacturer: Farmet Main equipment: FS1000 pre-press + FS1000 final press Pre-press motor: 55 kW Final press motor: 45 kW Filtration: automatic oil filtration system, approx. 10 m² Capacity: up to approx. 1,400 kg/h depending on seed quality, moisture, temperature and operating setup Daily capacity: up to approx. 32 t/24 h Condition: used, fully functional Location: Slovakia, EU The line is designed for double cold pressing of high-oil seeds such as rapeseed and sunflower seed. Included: Farmet FS1000 pre-press Farmet FS1000 final press Automatic oil filtration system, approx. 10 m² Oil piping / connection equipment as shown in the photos Electrical and control components as shown in the photos The two-stage pressing process allows higher oil recovery from high-oil seeds while keeping the process natural and energy-efficient. The filtered oil can be stored after removal of cake residues and solid particles. Suitable for: rapeseed oil production sunflower oil production cold pressed oil production organic / non-GMO oilseed processing small and medium oil mills feed cake production The line is available for inspection in Slovakia. Sold as shown in the photos. Loading possible. Price: FCA Slovakia, plus VAT. Zu verkaufen: komplette Farmet Zwei-Stufen-Kaltpresslinie für Raps und Sonnenblumenkerne. Hersteller: Farmet Hauptausstattung: FS1000 Vorpresse + FS1000 Endpresse Tjdoxuafyjpfx Afweb Motor Vorpresse: 55 kW Motor Endpresse: 45 kW Filtration: automatische Ölfiltration, ca. 10 m² Kapazität: bis ca. 1.400 kg/h, abhängig von Saatqualität, Feuchte, Temperatur und Einstellung Tagesleistung: bis ca. 32 t/24 h Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Die Linie ist für die doppelte Kaltpressung ölreicher Saaten wie Raps und Sonnenblumenkerne ausgelegt. Enthalten: Farmet FS1000 Vorpresse Farmet FS1000 Endpresse Automatische Ölfiltration, ca. 10 m² Rohrleitungen / Verbindungsteile wie auf den Fotos Elektrische und steuerungstechnische Komponenten wie auf den Fotos Das zweistufige Pressverfahren ermöglicht eine höhere Ölausbeute bei ölreichen Saaten und bleibt gleichzeitig ein natürlicher und energieeffizienter Prozess. Geeignet für: Rapsölproduktion Sonnenblumenölproduktion kaltgepresste Öle Bio- / Non-GMO-Ölsaatenverarbeitung kleine und mittlere Ölmühlen Presskuchenproduktion für Futtermittel Besichtigung in der Slowakei möglich. Verkauf wie auf den Fotos.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Todpfx Ajzt H Uxofwob Made in Germany.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total width: 2,100 mm, total height: 2,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 5,000 kg, power: 11 kW (14.96 HP), input frequency: 50 Hz, In working condidion, el motor is replaced with the smaller one for efficiency Tjdpfx Aozi A Iyjfweb

Condition: excellent (used), Year of construction: 1999, operating hours: 43,019 h, functionality: fully functional, machine/vehicle number: 1127, overall weight: 750 kg, total length: 1,610 mm, total width: 970 mm, total height: 1,380 mm, power: 37 kW (50.31 HP), volume flow: 366 m³/h, operating pressure: 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER BS61 Screw Compressor 37kw 6.1m3/min 7.5bar. compressor For sale KAESER BS61 screw compressor in excellent condition. Maintained from new, serviced throughout. last major service performed at 86009 operating hours Manufacturer: Kaeser BS61 Year of manufacture: 1999 serial number: 1127 Operating pressure: 7.5bar Power: 37 kW Capacity: 6.1 m3/min 366 m3/h Operating hours: standby: 86033h loaded: 43019 h Sigma Control control. engine speed: 1500 rpm Todpfx Aeydr Igjfwsb Overall dimensions: 1610 x 970 x 1380 mm Tail weight: 750kg

Condition: good (used), Year of construction: 1974, Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base Tsdpfx Afeigwdwowsb -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Todpfx Afox Hyfyowob Engine power: 11 kW

Condition: good (used), Year of construction: 2010, operating hours: 85,410 h, power: 15 kW (20.39 HP), Screw compressor Manufacturer: Atlas Copco Type: GA 15P Tjdezu Aw Eepfx Afwob Year of manufacture: 2010 Operating pressure: max. 9.8 bar Volume flow: 2.39 m³/min Power: 15 kW Operating hours under load: approx. 85,410 h Weight: 500 kg Includes refrigerant dryer.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,611 h, PROD. ATLAS COPCO TYPE GA90 S/N API624230 YEAR 2016 POWER (kW) 90 CAPACITY (m3/min) 16.48 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 3611 Todpfozxxnbsx Afwob VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Year of construction: 2007, condition: used, REINARTZ AP15 rapeseed press, 45kW engine, manufactured in 2007. Todpezbyqwofx Afweb Capacity: 1 ton/hour (8,000 tons per year). We also have other related equipment for oil production.

Condition: used, Year of construction: 1970, pressure 1 t Stroke 315 mm Todpov Td Erjfx Afwjb

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Todpjyy U Shsfx Afwjb Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: used, Pressing screw REG-MAC Todpfeztmx Dsx Afwjb for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Tedpfx Ajwiwpujfwsb

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. Tsdjzu Aibepfx Afweb The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 1984, operating hours: 29,950 h, functionality: unexamined, machine/vehicle number: 6051, Used BOGE screw compressor, model VEX 40D11, from industrial stock. Robust, proven technology with documented operating hours, control system, and cooling. Suitable for workshops, backup operation, or further use. Technical data: - Power: 30 kW - Volumetric flow rate: approx. 4.0 m³/min - Maximum pressure: 10 bar - Speed: 4,360 rpm - Connection: 380/400 V, three-phase - Current operating hour counter: 12,622.7 h - Documented previous counter reading: 17,326.4 h - Documented total hours: approx. 29,950 h - Base load/idle control via pressure switch FF142 - Switching range: 8.5–9.5 bar - WILO industrial circulation pump Tjdpszrn Ahsfx Afwsb Condition: used and commensurate with its age. In operation until dismantling; no functional test currently performed, therefore functionality is unverified. Sold as is, as viewed, or according to the photos. Location: 65618 Selters (Taunus), Germany.

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Todpfxewiwqfs Afwjb

Condition: used, BOGE C 9 Screw Compressor, 7.5 kW / 10 bar Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Machine Type: Screw Compressor / Industrial Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar For sale is a used BOGE C 9 screw compressor, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system, separate stroboscope hand lamp, connection cable and operating manual. The compressor is suitable for supplying compressed air to machines, workshops, production facilities and manufacturing companies, as well as for general industrial compressed air applications. Operation is via the BOGE base control system with a digital operating and display panel. Technical data: Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Equipment Type: Screw Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar Motor Power: 7.5 kW Motor Speed: 3000 min⁻¹ Operating Hours (according to display): 15,749 h Control System: BOGE base control CE Marking: present Made in Germany ELMED HELIO-STROB: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Equipment Type: Stroboscope Measuring System Mains Connection: 115 / 230 V AC Mains Frequency: 50–60 Hz Max. Power Consumption: 80 VA External Clock Input: present CE Marking: present BOGE base control system Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp External clock input Digital display Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. BOGE operating display shown in the on state. ELMED HELIO-STROB shown in the on state. Nameplates present. Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Shipping Data: Tjdpfozxpi Nox Afwjb Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of equipment: approx. 219 kg plus cable and operating manual Shipping by freight forwarder possible Scope of Delivery: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 250 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 55 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 4 kW / 10 bar (also available as a 7.5 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure vessel refrigerant dryer fine filter Tedpezpxx Ijfx Afwjb New machine, delivery time approx. 1 week We would be happy to demonstrate the machine at our premises. Highly efficient, permanently excited servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color screen single-stage screw unit air-cooled durable and low maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria Technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 250 kg Pressure: 10 bar Flow rate: approx. 0.6 m³/min at 10 bar Noise level: 55 ± 2 dB(A)

Condition: like new (used), Year of construction: 2014, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 1058, overall weight: 7,000 kg, total length: 3,706 mm, total width: 2,276 mm, total height: 2,360 mm, power: 315 kW (428.28 HP), volume flow: 2,382 m³/h, operating pressure: 15 bar, pressure (min.): 4 bar, pressure (max.): 15 bar, noise level: 79 dB, type of cooling: air, Equipment: compressor, documentation/manual, type plate available, Kaeser FSD571SFC, 315kW Variable speed drive screw compressor, purchased and installed in 2014, the machines were never commissioned or used, so have only 2 hours manufacturers hours use. Can be viewed running in our facility in York UK prior to purchase Tjdpfx Ajzww H Tefwjb

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, overall weight: 1,654 kg, Equipment: refrigerant dryer, type plate available, Atlas Copco air compressor, model: GA90VSDFF, oil-injected screw compressor with frequency converter (VSD), with dryer, pressure: 12.7 bar, air flow: 293.1 L/s, motor: 3508 rpm, year: 2016, weight: 1654 kg. Shipping throughout Europe not included, VAT not included. Reference: 1167 Tedpfx Afjyxpz Uowsb

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer Tjdpszlaa Eefx Afwjb The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: API607459, overall weight: 1,580 kg, power: 55 kW (74.78 HP), volume flow: 637.2 m³/h, operating pressure: 7 bar, pressure (max.): 7.3 bar, type of cooling: air, Equipment: refrigerant dryer, Atlas Copco GA55+ FF screw compressor – 55 kW – manufactured in 2009 For sale: a well-maintained Atlas Copco GA55+ FF screw compressor with an integrated air dryer. The compressor has already been serviced and is ready for immediate use. Specifications: Type: Atlas Copco GA55+ FF Year of manufacture: 2009 Motor power: 55 kW / 75 hp Capacity: 10.62 m³/min Working pressure: 7.3 bar Todpfjzku Ubjx Afwjb Motor speed: 2,978 rpm Weight: approx. 1,580 kg Operating hours: 17473/4022 Equipped with an integrated air dryer Serviced and ready for use This compressor is suitable for industrial applications that require a reliable compressed air supply. Optionally available with a new or used compressed air tank.