Used Fasti 202-10-1,5 for sale (32,318)

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 1.5 mm steel Weight: approx. 300 kg Dsdpfx Akoyrrg Sjmowc

Condition: used, Year of construction: 1985, Max. cutting length: 1040 mm Max. sheet thickness: 6 mm steel Mechanically adjustable rear stop in 2 speeds with digital display up to 1000 mm Side stops and table extensions Dwedpoz Hxawjfx Akmsc cutting length limitation Cutting edge lighting knife sharpened Weight approx. 3500 kg

Condition: used, Year of construction: 2018, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Dwjdjz H Ah Sopfx Akmoc

Condition: used, Max. bending length: 1500 mm Djdsudqd Rspfx Akmowc Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via limit switch Manual backgauge Weight: approx. 1000 kg

Condition: used, Year of construction: 2008, overall weight: 190 kg, hopper volume: 7 l, terms of delivery: FCA Pegnitz Dwedpfx Akoz N Igmjmec delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2004, overall weight: 130 kg, hopper volume: 3 l, terms of delivery: FCA Pegnitz delivery time: on request Dwjdpfx Akez Iuapjmsc terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1985, Max. bend length: 1020 mm Max. Sheet thickness: 2 mm steel Djdpszvw S Tjfx Akmswc Good condition Weight: 400 kg

Condition: defective spare-parts repository (used), Used three-roll round bending machine with a roller length of 2000 mm and a roller diameter of 170 mm. Mechanically in good condition. A new electrical wiring installation is required. Dodpfxez N Hr Uj Akmewc

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Dwedpfjwb Efzjx Akmsc Max. round diameter: 1000 mm Motor drive via footswitch Good condition

Condition: used, functionality: fully functional, Year of construction: 1969, machine/vehicle number: 506/10/2,5, control type: CNC control, degree of automation: manual, actuation type: hydraulic, working width: 1,030 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, control voltage: 220 V, Used Fasti guillotine shear, model 506/10/2.5, year of manufacture 1969 Dwedoy Hhiaopfx Akmoc

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Dedpfxjum Ttzj Akmewc Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, functionality: fully functional, Year of construction: 1983, Hand-operated swiveling bending machine Dwodpfx Akoz Ah Apomec Manufacturer: FASTI, Type: 205, 1020 x 2 mm Year of manufacture: 1983 Technical data Manufacturer: Fasti Type: 205 Year of manufacture: 1983 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: approx. 750 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails as shown in the photo All information is subject to change without notice. A demonstration can be arranged at our showroom at any time.

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Dodpsz Icuhofx Akmowc Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: used, plate width 1020 mm plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW Dedpfoz N Hwqox Akmowc weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Motorized rear roller delivery Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Weight: 1200 kg Dodjzl Dngepfx Akmjwc

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Oberwange swivelable Dwsdjq T Ud Sspfx Akmsc Bending angle adjustable via potentiometer Lift height preselectable via scale Manual and automatic bending mode possible Weight: approx. 650 kg

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 204-10-2, Sales only within EU member states! No private sales. Any warranty is excluded. Djdezibtnepfx Akmjwc We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Dwsdpfju Rimmox Akmsc Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Polished bending rail Dwodpfxoyyl Nks Akmec Weight: approx. 1000 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Dsdpfeyyl Nqex Akmewc Polished bending rail Weight: approx. 1000 kg

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Dsdszkmi Djpfx Akmowc Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm Dodpju Ibzwofx Akmswc bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: used, total length: 4,100 mm, total width: 1,400 mm, total height: 130 mm, Colour: Grey Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 2540 - Top roll diameter [mm]: 220 - Bottom roll diameter [mm]: 220 - Transport dimensions: 4100mm x 1400mm x 135mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information Dsdpfx Asz Avg Nekmowc VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Motorized upper jaw adjustment via footswitch Bending rail without dents in top condition Total weight approx. 500 kg Dwsdsf Nwmzjpfx Akmjc

Condition: used, Year of construction: 1981, sheet width 1020 mm plate thickness 1,5 mm daylight opening max. 85 mm Dsdpfx Aksxbtrtemswc weight of the machine ca. 240 kg Smallest bending width factor 10 x sheet thickness s Smallest inner radius factor 1.5-2 x sheet thickness s Lowering capability of the lower and bending beams 20 mm On this swing-beam bending machine, the beams and side stands are reinforced with particularly strong ribbing. The cross-sections are designed to be strong enough to bend even narrow offsets. On the AML 1000 model, the bending beam is balanced by a gas pressure spring. The opening width of the upper beam and the lowerability of the lower and bending beams are generously dimensioned. The machine is being sold as defective because the connection between the lower frame and the right side stand is broken (see photo taken from behind)!