Used Fasti Fasti 204-12-1,75 for sale (21,969)

Condition: used, Max. bending length: 1270 mm Max. sheet thickness: 1.75 mm steel Motorized upper beam adjustment via foot switch Manual backgauge Fedpfoxn Iwdjx Akhsgf

Condition: excellent (used), sheet width 1270 mm plate thickness 1.75 mm ST plate thickness 2.00 mm ALU plate thickness 2.50 mm KU thickness at "Niro-steel" 0.80 mm distance between columns 1300 mm daylight opening OW ~ 380 mm work height max. 900 mm adjustment UW 60.0 mm bending angle max. 180 ° weight ca. 200 kg kg range L-W-H 2000 x 520 x 1500 mm good condition (!!) Fgjdsxaa S Djpfx Akhef Bending splint e.g. reground Furnishing: - robust, manual folding machine - manual lifting by hand lever (incl. gas pressure damper) - manual clamping of the upper beam by means of a handwheel on the side - manual lower beam adjustment - Bending angle fixed stop, with analogue angle display - Upper beam with large opening width - Instructions / description * Machine link : ?machineno=1008-9355182

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm Fgodpfx Akezgu Tijhof - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm Fgsdpfxey Em Dgj Akhef - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper cheek stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Fjdpfx Akjx Ebt Tjhegf Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

Condition: excellent (used), Bending length: 1020 mm Bending capacity: 2 mm Fedpjzr Nthsfx Akhjgf Stroke of the upper beam: 220 mm Adjustability of the lower and bending beams: 60 mm each Total weight: approx. 0.5 tons Equipment: - Finger stop scale, pinion and rack, adjustment range from 0 – 600 mm - Weight compensation for the bending beam

Condition: used, Year of construction: 1961, sheet width 1020 mm plate thickness 2 mm Fgedpjzfax Isfx Akhof

Condition: used, Year of construction: 1992, Max. cutting length: 1250 mm Fodpfoy Dcdtex Akhsgf Max. sheet thickness: 4 mm steel Controlled rear stop Side stops and table extensions cutting length limitation Cutting edge lighting Light barrier for safeguarding the rear area knife sharpened Weight approx. 2800 kg

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms Fgedpfx Asxaa I Sokhjf - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Motorized upper beam adjustment via foot switch Fgodpfof Nwmzox Akhsf

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW Fgjdpfjx Harmjx Akhsf dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba.

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine approx.LxWxH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) Fgedpeu Ibzwsfx Akhof accessories: - 1 set tools *

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm Fsdpfx Akecxxq Eshjgf plate thickness:1,2 mm total power requirement:2,5 kW weight of the machine ca.:2,0 t dimensions of the machine ca.:3,0 x 1,6 x 1,7 m

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Fedpehmmfkefx Akhjgf Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3D BOCI Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000 mm Repeatability: ±0.03/1000 mm Acceleration: 0.8g (m/s²) Rotational speed: 60 rpm Max. positioning speed: 60 m/min Max. weight of a tube: 1500 kg 1. Raycus 6000W laser source 2. BEVEL laser head 3. Welded frame DPL 4. Schneider electrical components 5. Helical rack KH 6. Techmech reducer 7. Yaskawa servomotor 8. SHAC guides 9. Integrated power control 10. FScut 5000 software 11. Integrated electrical cabinet 12. HANLI water chiller Fsdpfei Apfzjx Akhogf 13. Cantilever gantry axis-X FHBS 14. Automatic waste collection 15. Crawler-type automatic workpiece collection 16. Automatic support system 17. Loading frame 12000 mm 18. Unloading frame 12000 mm

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually. Fgsdpfx Ajzi S U Ajkhsf

Condition: excellent (used), Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine Fsdeywzlpopfx Akhegf -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Fsdpfey Iha Uox Akhegf Continuously variable working speed: 3–15 m/min Stop skirt incl. 1 pair of rolls Forward/reverse operation via foot switch

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm Fgedpfozb Emdjx Akhef - GS certification - Roller diameter 105mm - Max. sheet thickness over the entire length 2mm - Foot switch - Safety device Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Fodpfeza D Eiex Akhsgf Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2001, sheet width 2520 mm plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek total power requirement 4.5 kW Fgedpfx Akoy Umd Sehef weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable - 1x free-moving double foot switch - 1x free-moving foot switch - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness * 12.0 mm for 1.50 mm sheet thickness * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Fedpfx Akjy T H N Sjhsgf Manual rear stop with spring fingers up to 1500 mm 5700 kg

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Stepless speed adjustment via handwheel Right and left rotation Hydraulic delivery via foot switch Weight: approx. 550 kg Additional tool on request Fedpoy R S Eaefx Akhegf

Condition: used, Year of construction: 1986, sheet width 2040 mm plate thickness 4,0 mm Fsdpfx Akjy Ezzyehogf distance between columns 2100 mm roll diameter 150 mm total power requirement 7,0 KW weight of the machine ca. 2,2 t dimensions of the machine ca. 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device

Condition: ready for operation (used), Year of construction: 1996, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping Fgodpfx Aexabk Iekhef - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration