Used Fasti Fasti 509-30-6 for sale (64,866)

Condition: used, Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment knife sharpened Hsdpfxevmz Nbj Aamonr Weight: approx. 6500 kg

Condition: used, Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Mechanically adjustable rear stop (2 speeds) up to 1000 mm with analog display Side stops and table extensions Hjdpfxozl Dr Se Aamsnr cutting length limitation Cutting edge lighting knife sharpened Weight approx. 5500 kg

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear Hjdpozi Uq Hjfx Aamonr usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting Hedet Ucgaepfx Aamenr - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 6,500 kg, Hydraulic plate shear Manufacturer: Schrödergroup, Type: Powershear – 3000 x 6mm Year of manufacture: 2020 Technical data Manufacturer: Schröder Type: 530 - 30/6 Year of manufacture: 2020 Sheet width: 3040 mm Sheet thickness: 6.00 mm (400N/mm) Shear gap adjustment: 0.5 – 1.8 mm Stroke rate: 24-61 strokes/min Drive power: 12.0 kW Hnedpfjzi Ezvex Aamor Space requirement (L x W x H): approx. L 4.00 x 3.00 x 1.96 m Weight: approx. 6.5 t Equipment - 12" touchscreen control PSC 150 on a swiveling panel - energy-efficient drive for frequency-controlled motor and pump - automatic shear gap adjustment - Adjustable clamping pressure, pre-selectable via the control unit - motorized back gauge 10-1000 mm on ball screw spindles - pneumatic sheet metal holding device - LED cutting edge lighting - programmable start and end position of the blade beam - angle stop mounted on the left, incl. electronic length measuring system, fine adjustment and side folding stop on linear guide 1000 mm - 2 stop arms with ball rollers, movable on a linear guide - table support made of stainless steel sheets, incl. ball rollers - protection of the rear side with a light curtain - scrap and small parts chute to the front, incl. "Return to Sender" function - movable table extension mounted on a guide rail - finger guard, retractable to approx. 1500 mm, incl. electrical protection All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 82,200 mm, total height: 5,000 mm, clearance between the columns: 3,300 mm, shelf height: 5,000 mm, number of shelf rows: 6, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 82,200 mm, support length: 3,300 mm, 2 single-row pallet racking systems + 2 double-row pallet racking systems (8 x M50113313-4) each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, load capacity 3250 kg. - 30 upright frames (RM5011 - RAL5019) - 80 base plates, shims, and fasteners - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 impact protection/collision guard (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted together, not pre-assembled. Hnedpfjzhi Scjx Aamsr Freight/Delivery: - max. 20 working days after payment receipt - delivery free to construction site/assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made throughout Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), functionality: fully functional, machine/vehicle number: 02212007, control type: CNC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, Swing bending machine in excellent condition. It is powered on and can be inspected at any time. Hsdpsx Eiw Tefx Aamsnr

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove Hnsdpfx Ashmmfkoamer - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 6 mm steel Upper wheel diameter: 150 mm Motorized rear roller delivery Hodpfx Aaezl Dngsmjnr Right and left rotation via foot switch Safety rope pull switch Conical rounding possible Weight: 1200 kg

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Hedpfx Aehtq N Neamonr Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. Hodoza D Eiopfx Aamjnr A demonstration is possible at any time in our showroom.

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Hsdpfx Asy T H N Soamonr Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Manual rear stop with spring fingers up to 1500 mm 5700 kg

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Hsdpfxef Nwvfe Aamenr

Condition: used, Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal holding Side stops and table extensions cutting length limitation Cutting edge lighting Hnjdpfx Aew Hygdsamjr Weight approx. 7500 kg

Condition: used, Year of construction: 1992, Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled rear stop Side stops and table extensions cutting length limitation Cutting edge lighting Hnodpfxjy Dcdte Aamer Light barrier for safeguarding the rear area knife sharpened Weight approx. 2800 kg

Condition: used, Year of construction: 1987, sheet width - max. 3035 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Hodpfxsyyc A Ue Aamenr Control ELGO total power requirement 8.5 kW weight of the machine ca. 4400 kg range L-W-H 3416 x 2250 x 1760 mm Equipment: - robust NC electro-hydraulic guillotine shears - NC electro-motorized backgauge * with ELGO control unit "TYPE 85" - Manual cutting gap adjustment - front support table incl. recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable front support arms - 1x freely movable foot switch - front finger guard - Rear metal slide - EMERGENCY OFF button at the front - Operating instructions (PDF)

Condition: ready for operation (used), Year of construction: 1996, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Hsdjxabk Iepfx Aamsnr Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) - in checked conditions - machinevideo - ?v=wtEBQ0UawQ8 Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 Hnjdpfx Aexabd Ueamsr total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Year of construction: 2025, condition: new, Eppendorf 5804 centrifuge, including FA-45-6-30 rotor. Hsdpfx Asztmfksamjnr Both items are new and have not been used.

Condition: used, mileage: 109,636 km, power: 88 kW (119.65 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,450 mm, first registration: 06/2021, fuel tank capacity: 80 l, CO₂ emissions: 236 g/km, emission class: euro6, color: grey, number of seats: 3, number of previous owners: 1, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, sliding door, traction control, trailer coupling, = Additional Options and Accessories = - Speed limiter (NHR) - Speed control system (NHR) - Air conditioning - Metallic paint - Sliding door on the right side - Heated exterior mirrors - Bluetooth - Electric windows, front - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Hill-hold control - Height-adjustable driver's seat - Height-adjustable steering wheel - Lumbar support - Front center armrest - Multifunctional steering wheel - Radio - Start/Stop system - Immobilizer - Blind spot monitoring - Rear traffic alert - Partition Hsdpfsztdh Nsx Aamsnr = Additional Information = General Information Number of doors: 5 Model range: June 2019 - June 2021 Cab: Single cab Technical Information Torque: 320 Nm Number of cylinders: 4 Engine displacement: 2,287 cc Transmission: 6 gears, manual transmission Dimensions Length/Height: L2H2 Dimensions (L x W x H): 554 x 205 x 252 cm Weights Unladen weight: 2,060 kg Payload: 980 kg GVW: 3,040 kg Interior Interior: black Consumption Average fuel consumption: 6.8 l/100km Fuel consumption in urban areas: 7 l/100km Fuel consumption on highways: 6.7 l/100km Maintenance, History and Condition Documents: Available APK (Technical Inspection): Valid until 08.2027 Number of keys: 3 (2 remote controls) Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Hsdpfx Aasztmyuemonr Rotor knives: 9

Condition: used, mileage: 216,985 km, power: 140 kW (190.35 HP), first registration: 08/2016, fuel type: diesel, number of seats: 30, gearing type: mechanical, next inspection (TÜV): 12/2026, emission class: euro6, color: white, brakes: retarder, Year of construction: 2016, Equipment: ABS, air conditioning, parking heater,

Condition: used, maximum load weight: 23,580 kg, overall weight: 30,000 kg, axle configuration: > 3 axles, first registration: 11/2013, Year of construction: 2013, Equipment: ABS, Manufacturer HMK Bilcon Model 42 m3 Silo tank 6 Compartment Year 2013 Condition Very good Hnodjzml E Njpfx Aamsr Serial Number UH9FP4BXXD1HB1868 Ref. nr. 8157 Reg. date: Disc brake: ? ABS: ? Rear axles: BPW Suspension: Air Tire Size: 385/65R22,5 Cover% left 30% Total weight: 30000 kg. Net weight: 6420 kg. Load capacity 23580 kg.

Condition: used, Year of construction: 2026, total length: 4,000 mm, total width: 2,100 mm, total height: 2,050 mm, Colour: White Empty weight: 4.020 kg Hnedpfx Aszkr Tboamjr - Year: 2026 - Documentation available: Yes - └ Type Documentation: Technical data, Electrical diagrams, User manual - └ Language: EN - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: Yes - Main motor power [kW]: 2.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 400 - Total stroke [mm]: 400 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Assembled panel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Total pressure [Ton]: 70 - Working pressure [kg/cm²]: 2 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Transport dimensions: 4000mm x 2100mm x 2050mm (l x w x h) - Transport weight [kg]: 4020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening Hsdpfodx R Tfsx Aamenr - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -