Used Felder Edgebander With Pre-Milling for sale (21,373)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Rcsdpfx Afezqapks Red Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, - Year of manufacture: 2020 - Made in Bulgaria - DTR, CE TECHNICAL SPECIFICATIONS: Rodpfxow H Ryus Af Rjcd – Height of workpieces: 8-45 mm – Minimum length of workpiece: 100 mm – Minimum width of workpiece: 100 mm – Edge thickness: 0.4-3.0 mm – Feed rate: 9.5 m/min – Cutting unit - motor power: 1 x 0.27 kW – Milling unit: 2 x 0.35 kW – Milling unit: 12,000 rpm – Corner rounding unit - minimum length of workpieces: 250 mm – Corner rounding unit - motor power: 1 x 0.35 kW – Corner rounding unit: 12,000 rpm – Pre-milling unit: 1x 1.1; 1 x 0.75 kW – Pre-milling unit: 12,000 rpm – Edge trimming unit: – Glue removal unit: – Polishing unit - motor power: 2x0.18 kW – Polishing unit: 2800 rpm – Extendable support with rollers: – Diameter of dust extraction nozzles: 120 mm – Compressed air pressure: 6.5 bar – Total power: 6.7 kW – Dimensions - L x W x H: 4130x1220x1470 mm – Weight: 1180 kg

Condition: excellent (used), SINGLE-SIDE Sizing-Milling & Edge Banding Line PRE-FORMING (DIRECT POSTFORMING), composed of the following machines: A) Double station bridge loader "TREVISAN", with motorised roller conveyor B) Single-side Sizing & Edge Banding "HOMAG" Mod. Profi VFL79/3/P/A Preforming Edges (tape) thickness in rolls (min/max) max mm 0.35 (for U and L profiles) Panel thickness (min/max) mm 16 / 30 (optional mm 50) Working width (min/max) min mm 150 - Variable feeding speed (m/min) 10 - 32 Numerical control / PC 22 software / WoodCommander 01°) Horizontal milling unit (for top incision) Kw 2,2 02°) Hogging Unit (Kw 15) 0°-15° (for pre-hogging from above) 03°) Milling Shaping Unit Kw 6,6 (top rebate milling) with Hydro-clamp 04°) Milling Shaping Unit Kw 6,6 (bottom rebate milling) 0°-120° (with Hydro-clamp) 05°) Milling Shaping Unit Kw 0.7 (radius milling for profile finishing) 06°) Milling Shaping Unit Kw 1.85 (U profile milling) HSK25 07°) Milling Grooving unit UF 11 (Kw 4) for grooving or rebate milling 08°) Milling Shaping Unit Kw 2,2 (milling for chamfering and laminate overhang at top) 09°) Milling Shaping Unit Kw 2,2 (milling for the bottom bend groove) 10°) RIGHT SIDE: Milling Shaping Unit Kw 6,6 (grooving & rebate milling) panel width mm 160 - 1050 11°) RIGHT SIDE: Fine trimming unit (2 x Kw 1) for top and bottom edging and finishing (0°-25°) 12°) Cleaner / Blower (Kw 0,55) of postformed piece 13°) Laminate overhang control (to detect laminate breakages) 14°) Glueing Unit (P.U.R) Glue (PU34+QA34) spray glue application (with nozzles) Rcsdpfsnzhxqjx Af Red 15°) Pressure zone for "L" profile (VF Direct) for panels up to max. thickness 50 mm 16°) Pressure zone for "U" profile (for spacer profile R = 2.5 mm) 17°) Upper Circular Knife 18°) Fine Trimming Unit / Finishing Unit (2 x Kw 0.55) HSK25 (0°-30°) 19°) Oscillating upper cleaner (1 x Kw 0.25) C) Double station bridge unloader "TREVISAN", with motorised roller conveyor

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit allows you to pre-mill the upper and lower edge overhang -with keying: from 1 side each -1x engines Perske -Power: 1.125 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -1x engines Perske Rsdpjb Uhvcefx Af Recd -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/340/H600 mm -Weight: 50 kg

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW Rcjdpfx Ajzccuusf Rsd - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Specifications Manufacturer MONFORTS Model RNC4 Year 1993 Description WE OFFER AN VERY NICE CONDITION MONFORTS CNC LATHE INCLUDING COMPLETE TOOLINGS DRAWERS FOR TOOLS Redpfjvk E A Tex Af Rscd MACHINE HAS LIVE TOOLS , DRIVEN TOOLS MACHINE IS CONECTED ON POWER TECHNICAL INFO: Diameter 420 mm Distance between centers 600 mm CNC system Control System F Tools 12 positions Cross travel 250 mm Longitudinal travel 620 mm Hole through spindle 65 mm Spindle speed 70 - 4000 RPM Motor power 18,5 HP Weight 7500 Kg

Condition: excellent (used), functionality: fully functional, Edge banding machine Advantage 4612F - regularly maintained, year of manufacture 2002 - overall length 6000 mm - width 1100 mm - height 1900 mm - weight 3100 kg - feed rate 12 m/min - Workpiece dimensions: width 65 mm, max. thickness: 45 mm, min. thickness: 10 mm, length: 150 mm, edge height 55 mm, pressure 7 bar - with two interchangeable glue pots - pre-milling, flush trimming, multifunction unit, profile & flat scraper, buffing - with pre-milling unit Transport available for an additional charge! Rodpfxox Srp Is Af Rjcd Due to the age of the used machine, when sold to commercial customers, warranty is excluded.

Condition: used, Felder KF700S/03 panel saw-milling machine, year of manufacture 2006, good condition, including folding device for feed and tenon hood, 5.5 kW S6, 3200 mm panel table length, 3500,6500,8000,10,000 rpm, 780 kg Rcedpfxjwzzh Sj Af Rjd Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Screw bookbinding press 40×30 with base Rcsdpfx Aszdat Rjf Rod The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Rcsdjzdatqopfx Af Red Approximate format: 480 x 330 mm 3-ton pressure

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Redpfszmu N Rex Af Recd Automatic format detection. 380V power supply + compressed air.

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 22093, functionality: fully functional, volume flow: 4,000 m³/h, filter area: 24.7 m², total height: 3,420 mm, total length: 2,000 mm, overall weight: 725 kg, TECHNICAL DETAILS Filter area: 24.7 m² Volume flow rate: 4,000 m³/h Negative pressure: 2,110 Pa Suction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar MACHINE DETAILS Connected power: 5 kW Motor power: 4 kW Rated speed: 2,925 rpm Rcedpfx Aszktr Ejf Rsd Rated operating voltage: 400 V Type of current: Three-phase (3 Ph) Rated current: 9.2 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 3,420 mm Weight: 725 kg EQUIPMENT New filters

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit Redpfx Aszlaimsf Rscd 2 knives 1 side cassette after the knife Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. Rcsdpfxjxpq T Ro Af Red • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Rcodewud Tkopfx Af Rsd Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; Rjdpfx Afep Stgnj Recd - length measuring device; - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Pre-milling 3000 rpm Rjdpjzp Nz Hjfx Af Rscd Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Redpfxezp Nyce Af Recd Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X,Y,Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. Rcsdpevupr Tsfx Af Rjd CNC milling plotter CORMAK C2040 is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass, dibond and metals. The plotter is mainly intended for use in the furniture and modeling industries. Dissecting table with four independent vacuum sections with dimensions of 2100x4000 mm. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2100 x 4000mm, Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor Linear bearings: trapezoidal rails, Hiwin carriages Spindle High-quality brushless spindle that is characterized by durability. Additionally equipped with an innovative AIR / not liquid cooling system! The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing Digital Signal Processing The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2100x4000mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1580 kg Machine dimensions 2270x4570x2200mm Table height 715mm Guides linear Vacuum Pump 7.5kW or 5.5kW (optional) Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software Rcedpfx Asiz S Hajf Rjd OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor Rcjdpfjhik Ezex Af Rjd - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Rcedpfxsyuty Sj Af Rsd Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Tool holder, milling holder, milling tool, adapter, intermediate sleeve, tool presetting device -Milling tool holders: Adapter for tool presetting device, 7 pieces Rsdpfx Afopix Nke Recd -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Submission/Price: complete -Overall dimensions: 500/300/H170 mm -Weight: 34.4 kg

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Rcsdszd Rizspfx Af Rsd Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power in overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Year of construction: 1996, condition: used, Unfolding width: max. 200 mm Unfolding depth: 40 mm Profile height: max. 100 mm Vise jaw opening: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by pressing the foot switch Profile clamping by infinitely adjustable vise. Rjdpfxsq Awg Ej Af Rjcd