Used Fella Sm 2460 Isl for sale (2,596)

Condition: used, Year of construction: 2016, Quick blade change freewheel drive shaft / Nsdpfx Agetrf N Dsrjwl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Nodozy Ndcspfx Agrowl Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 2012, machine/vehicle number: PST30, Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: IncludedCE conformity: CE 0409Test pressure date: 2012-11-28Advanced Automation & Control SystemsDesigned for modern beverage production, this aseptic pasteurizer supports automated temperature control and stable holding conditions suited to HTST workflows. It is compatible with typical PLC/HMI architectures used in bottling equipment and packaging machinery, enabling recipe management, alarm handling, and trending through standard plant control systems. Safety interlocks and CE-compliant protections contribute to consistent operation and operator safety during process and cleaning phases.Production Line Integration CapabilitiesBuilt for inline placement within a beverage production or used bottling line, the unit integrates upstream with preparation and deaeration modules and downstream with sterile tanks, fillers, or homogenizers typical of industrial packaging. Format agility at the process level makes it suitable for multiple juice recipes and still beverage SKUs, helping plants adapt to seasonal or private-label demands without extensive hardware changes.Machine Condition & Maintenance HistoryThis is a second hand aseptic pasteurizer previously used for tomato juice and still (non-carbonated) drinks. It is presented as operationally ready for deployment, offering a practical choice for producers seeking proven equipment with established performance characteristics in beverage processing environments.Operational Performance & VersatilityThe system’s aseptic flash process, 125 °C temperature rating, and integrated deaeration help protect color, aroma, and nutritional attributes while reducing dissolved oxygen for improved shelf life. Its capacity range—currently set around 6,000 L/h with headroom to 12,000 L/h—supports both pilot-scale and medium-scale beverage production. This configuration is well suited to juice applications and other still beverages requiring controlled thermal treatment.Installation Requirements & Site PreparationThe pasteurizer is typically skid-mounted for straight... Nsdpfjz E Dlcox Agrowl

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Nodsz Eht Dopfx Agrowl Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, CP 2000: Touch Screen Console Automatic Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer Heidelberg Autoplate (Automatic Plate Changing System) Alcolor Dampening Technotrans Cooling Device Low-Pile-Delivery Impression Account: 138 Mio. Nedpfx Asz Er Ncegrewl

Condition: excellent (used), Year of construction: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Injection Molding Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1,100 g Injection pressure: 2,000 bar Dosing volume: 1,212 cc Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1,100 x 1,000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Nodszy Itcopfx Agrjwl Tie-barless hybrid machine: energy-efficient and very quiet Operating hours: approx. 10,000 in automatic mode Air valves x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Injection unit is wear-resistant and corrosion-resistant Main drive of the machine: servo motor with inverter – energy saving Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: all 6 axes driven by electric servo motors: X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 7.35 x 2.06 x 2.37 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 6232-07-012, type of input current: AC, total width: 4,100 mm, total length: 4,400 mm, input voltage: 400 V, input current: 380 A, feed length X-axis: 3,200 mm, feed length Y-axis: 3,500 mm, working width: 3,200 mm, total height: 1,400 mm, cutting width (max.): 3,200 mm, cutting height (max.): 3 mm, compressed air connection: 8 bar, Innsbruck, May 19, 2026 Good condition: Used S.M.R.E. SM-320-TA High-Performance CNC cutting plotter (year of manufacture 2012) Are you looking for maximum precision and efficiency for XXL cutting? For sale is a high-performance, industrial conveyor cutting machine from the premium manufacturer S.M.R.E. (SolarEdge Automation Machines). The machine is in very good, ready-to-use condition and is ideal for the continuous processing of technical textiles in large formats. The most important highlights at a glance: Year of manufacture: 2012 Working width: 3,200 mm, table length 3,500 mm – perfect for XXL formats without material division Conveyor system: Robust, multi-layered industrial conveyor belt for automatic, endless material feed Drive & Performance: Powerful 8 kW rated power (400 V) for fast and precise cuts Equipment: Vacuum system for perfect material hold, automatic unwinder with precise material guidance correction, and flexible tool heads (including drag/rotary knives and a marking pen). Location: Innsbruck/Austria Perfectly suitable for: Manufacturers of truck tarpaulins, tents, awnings, advertising banners, pool covers, and sophisticated technical products. Take the opportunity to bring your production to the next level with this modern, extremely reliable system. Ready for immediate use! Dismantling and transport of the machine must be organized and paid for by the customer. Nsdpfxjzuzime Agrewl Technical information: Cutter IBK Cutting window X 3,500 mm Y 3,200 mm Connection values: 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 30 kW 1 x 380/400 VAC 50/60 Hz (TN-S / TN-C-S) 15 kW 1 x 230 VAC 50 Hz 200 W 1 x Oil-free compressed air 0.6 MPa 400 l/min Dimensions: Cutter L x W 4,400 x 4,100 mm Unwinder 1 approx. 2,500 x 4,000 mm including material roll Unwinder 2 approx. 2,000 x 4,000 mm including material roll Safety area all around 1,000 mm => Installation area approx. 11 x 6 m + maneuvering/working area Weight: approx. 2.5 tons

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 964,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Nwsdpjzqbk Nsfx Agrjl

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, rotor diameter: 600 mm, rotor width: 1,000 mm, year of last overhaul: 2026, Shredding mill, heavy-duty version Manufacturer: NEUE HERBOLD, D-74889 Sinsheim Drive: 75 kW Hopper: Conveyor belt hopper Working width: 1000 mm Nwedpoz Ak A Esfx Agrol Rotor diameter: 600 mm Year of manufacture 2015, fully overhauled with - new rotor - new hopper - new base frame Examples of applications: Shredding of solid lumps, start-up blocks, profiles, beverage crates, boxes, vegetable crates, etc.

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Heidelberg Autoplate with Heidelberg register system Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Nodpszwhbbsfx Agrswl Largest sheet size: 37 x 52 cm Smallest sheet size: 10.50 x 14.50 cm Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour

Condition: good (used), Year of construction: 1998, functionality: fully functional, For sale: a K+G Wetter SM-65STL meat grinder/cutter. The machine is entirely made of stainless steel and is ready for immediate use. Power: 380V, 50A, 25kW. Knife shaft with infinitely variable speed adjustment, range 50-5000 rpm. Mixing speed (reverse), range 50-500 rpm. Bowl with 2 speeds, 9/18 rpm. 6-blade knife head. Without a deflector plate. Nwedpszxqpwofx Agrsl Further details upon request. Payment by cash or prepayment! Sale only to commercial customers. No guarantee, no warranty.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, wire diameter (max.): 22 mm, type of input current: three-phase, overall weight: 3,000 kg, total width: 2,000 mm, total length: 10,000 mm, total height: 2,300 mm, empty load weight: 3,000 kg, A fully functional, Chinese-made machine for manufacturing pocket springs is for sale. Suitable for mattresses and furniture. Type: SM-B100. Year of manufacture: 2019. Spare parts are readily available, and 24/7 factory support is provided. The machine is located in Hungary, in Budapest. All parts and accessories are included. It has been in perfect working order for 7 years. In addition to this machine, a machine for arranging the pocket springs is required for the complete technological process, which connects the rows of springs. It produces 100 springs per minute and can manufacture springs with lengths ranging from 9 cm to 18 cm. This machine manufactures the springs and packages them in PP bags. The wire collector and the final conveyor belt are also included. It is ready for immediate use. It can be tested in Budapest while in operation. The total weight of the machine is 3000 kg. We will load it onto a truck using a large forklift. An invoice will be issued. If you purchase the machine, we will disassemble it free of charge for transport. Nedpjznwwtjfx Agrswl

Year of construction: 2017, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, The SMRE machine is used for hot air welding of PVC fabrics and synthetic materials. The machine is in like-new condition and has been used very little. The working width is 800 cm. Nwjdpfx Agozkqm Horel

Condition: used, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Jorns, controller model: OP, working width: 6,000 mm, bending angle (max.): 145 °, number of axes: 5, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, total length: 6,800 mm, total width: 1,650 mm, Equipment: emergency stop, foot remote control, We are offering this used Jorns NL125-SM-OP-6 swiveling bending machine, manufactured in 1992. Manufacturer: Jorns Model: NL125-SM-OP-6 Year of manufacture: 1992 Condition: used Nodozmy Eqopfx Agrswl Machine type: Swiveling bending machine If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2019, operating hours: 34,933 h, condition: ready for operation (used), machine/vehicle number: NO-19-05-07358/GE1101824, Technical data (German) Manufacturer: EFD Induction a.s. Type: SINAC 50/80 SM Serial number: NO-19-05-07358/GE1101824 Year of manufacture: 21/19 Electrical data: Input voltage: 400-480 V AC Input current: 90 A Mains frequency: 50/60 Hz Input power: 62 kVA Reactive power: 62 kVAr Nwedpfsvw S Rwex Agrel Output data: Output voltage: Not specified Output current: 350 A Output power: 50 kW Frequency range: 10-25 kHz Cooling & operating conditions: Water consumption: 21 l/min Maximum inlet temperature: 35°C Maximum pressure: 6 bar Min. pressure difference inlet/outlet: 4.5 bar Ambient temperature (operation): +5°C to +50°C Protection class (IP): IP54

Year of construction: 1989, condition: used, Working width: 6000mm, max. sheet thickness: 1.25mm, control panel: Siemens SIMATIC HMI, including electric rotary shear, an on-site inspection is possible. Nsdpfx Agsz Ekc Isrewl

Condition: used, functionality: fully functional, Year of construction: 1989, Working width: 6.0 m Bending capacity: 1.25 mm steel Year of manufacture: 1989 Condition: Good Njdpfx Agszu Ilzsrewl Includes motorized slitting shear Includes digital control system (retrofitted)

Condition: good (used), Year of construction: 2024, Manufacturer: ERMAKSAN Fibermark | Model: Fibermark SM 6000 3X1.5 Gen-5 | Serial Number: 33122-ERH | Year of Manufacture: 2024 | Working area: 3000 x 1500 mm; Resonator: 6000 Watt IPG-YLS fiber laser technology | Max. peak power: 6000 W | Laser wavelength: 1075+/-5 μm | Axes: X-U-Y-Z | Max. axis speed: 100 m/min | Acceleration: 2.5 G | Voltage: 380 V | Power: 28 kW | Protection class: IP 65 | Dimensions (approx.): 5295 mm x 2325 mm x 10360 mm (W x H x L) | Approx. weight: 14590 kg | Colour: Black-White-Orange | Structure: Steel | Working area: 3x1.5 meter laser processing field | The specified dimensions are approximate values. All other details are without guarantee. Njdpfxey N Dkfs Agrewl

Condition: used, machine/vehicle number: 161/93, Rye 40 SM Speedmax is a heavy-duty, automatic rotary shaper / rotary profile milling machine. It is designed for high-volume production and profiling of solid wood and wood-based components. The British manufacturer, Rye Machinery Limited, was a renowned supplier of specialized machinery for the furniture and joinery industries. Electrical Specifications • Supply Volts: 380 V AC (three-phase power supply) • Control Volts: 110 / 240 V AC • Auxiliary Volts: F-215 / A15-180 • Frequency: 50 Hz • Phases: 3 • Full Load Current (F.L.C. Amps): 49.0 A • Machine No.: 161-93 • Wiring Diagram: A3-ER80/031 Technical and Functional Overview The Speedmax series of rotary shapers was engineered to minimize setup times and deliver maximum throughput for profiled components (e.g., chair parts, table tops, furniture fronts): • Rotary Table Design: Features a central, continuously rotating worktable. The operator can safely load and unload components on one side while the shaping heads machine the material on the opposite side. Nwsdpfx Aezfh Svjgrol • Machining Heads: Equipped with pneumatic, heavy-duty shaping spindles that follow a master template to accurately reproduce complex, curved profiles. • Safety & Enclosure: The machine includes a comprehensive acoustic enclosure and safety guarding. This protects the operator from chips, dust, and moving spindles while significantly reducing workshop noise. • Dust Extraction: Outfitted with dedicated extraction hoods integrated near the work heads for efficient chip removal.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6234-05-013, Equipment: CE marking, type plate available, I am offering a used S.M.R.E. (SolarEdge) cutting plotter designed for tracing and cutting acrylic and synthetic fabrics. The machine is equipped with 4 heads, including 3 drag knife heads (2 rotary blades for different material thicknesses, a finger blade) and a plotter pen. Main parameters: - table width: 3200 mm, - rated power: 8 kW, - supply voltage: 400V, - max. roll diameter: 800 mm, - automatic roll feeder with material guiding correction, - manufacturer's software for pattern design, - vacuum fan for holding down the material on the worktable. Nedpexcvt Aofx Agrjwl The machine is fully functional and still supported by manufacturer's service. It remains connected to power and is in active operation.

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Nwedozxr Dcepfx Agrel Workholding fixtures and tools not included. AVAILABLE: November 2026

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Heidelberg SM 52 – 5 P – 2000 Year of Manufacture : 2000 Impression Count : 41 mio imp. 5 colors offset press of size 37 x 52 cm equipped with: Njdpjzhl Igofx Agrewl • CPC Classic Center • AUTOPLATE • ALCOLOR dampening • TECHNOTRANS Refrigeration • All Automatic WASHERS (Blanket, rollers and impression cylinders) • Grafix Alphatronic 200 powder spray • Perfector 5/0-2/3 • Non Stop delivery This machine is in good general condition and is available immediately.

Condition: excellent (used), Year of construction: 2011, Mobile Trommel Screening Plant DOPPSTADT SM 518 Profi Screening drum length: 4.70 m Screening drum diameter: 1.80 m Screening drum aperture: as per agreement Folding side discharge conveyor, length = 5 m Nodpfx Aszwpcyegrjwl Folding rear discharge conveyor, length = 5 m

Condition: used, Year of construction: 2012, machine/vehicle number: 51357, overall weight: 14,000 kg, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a horizontal machining center manufactured by Samag, model: SM. Nwjdpfx Agszy Ui Rersl TECHNICAL DETAILS Type of machining: Internal machining MACHINE DETAILS Total weight: 14,000 kg

Condition: used, Year of construction: 2023, 2 x Engel VC 2460/180 injection molding machines, technical version, manufactured in 2023. Njdpfx Agjzgtvvorjwl