Used Femco Durga 25 E for sale (77,709)

Condition: used, Year of construction: 2000, FEMCO DURGA 25 E LATHE CNC FANUC O-T 2 AXES ASA: 6" NEW SELF-CENTERING CHUCK! BAR CAPACITY: 52 mm AUTOMATIC TURRET WITH DOUBLE DISC, 12 + 12 POSITIONS HYDRAULIC TAILSTOCK CHIP CONVEYOR REFURBISHED Fgodpfx Afsxn Taweujh

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 9,402 h, load capacity: 2,500 kg, lifting height: 4,250 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 2,080 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,190 kg, total length: 2,400 mm, drive type: Elektro, construction width: 1,150 mm, Electric four-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: Impulse Fgodpfx Afsz Ifvboueh Technical condition: good Front tire type: Superelastic Front tire size: 2 x 23x9-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 18x7-8 Rear tire condition: 20 - 40% Battery voltage: 80V Battery capacity: 625Ah Battery year of manufacture: 2014 Additional single hydraulic circuit, integrated side shifter, half cab, full free lift, impulse control, battery from 2014.

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. The average wastewater discharge is 3-10 m³/day. Fsdpfx Afoz Eiigouegh The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 10,212 h, load capacity: 2,500 kg, lifting height: 3,265 mm, free lift: 1,444 mm, fuel type: electric, mast type: duplex, construction height: 2,224 mm, fork carriage width: 1,250 mm, fork length: 1,200 mm, empty load weight: 4,800 kg, total length: 2,650 mm, drive type: Elektro, construction width: 1,250 mm, Electric 4-wheel forklift Load center: 500 ISO class: integrated Mast type: Duplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 250/60-12 Front tire condition: 40 - 60% Fgjdpjz Ifyysfx Afush Rear tire type: Superelastic Rear tire size: 2 x 200/50-10 Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 625Ah Battery year of manufacture: 2015 Double auxiliary hydraulics, fork positioner with side shift, full cabin with heater, integrated hydraulic load handling forks, armrest steering, switchable single/double pedal, Blue Spot, battery from 2018, 2x work lights front, 1x work light rear.

Condition: like new (used), Vacuum filler Type: Vemag Robot HP 25 E Hopper capacity: 350 liters, single-piece Filling mechanism: bushing double screw Steplessly adjustable filling speed: 0–100% Production capacity: up to 25,000 kg/h, depending on product and fill type Control: PC graphic Fjdey Hhi Hspfx Afuogh Portion weight: 5 to 60,000 grams Compatible for use with clipping machine Compatible with Vemag grinder 982 Vacuum pump: 40 m3/h Loading device for standard bins Machine dimensions in mm: Width: 1400.0 Length: 2400.0 Height: 2180.0 Rated power: 31.0 kW Voltage: 380 V, 50 Hz Machine weight: 1450 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 1001877, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 14,100 m³/h, intake vacuum (max.): 450 mbar, suction capacity: 14,100 m³/h, intake manifold diameter: 450 mm, filter area: 125 m², actuation type: electric, total height: 5,800 mm, total length: 2,100 mm, total width: 2,100 mm, overall weight: 2,000 kg, Equipment: CE marking, documentation/manual, dust extraction, Schuko Ecovar extraction system, 14,000 m³/h – complete and operational Complete Schuko Ecovar industrial extraction system for sale, including a 22 kW main fan, a 7.5 kW transport fan, and the corresponding control system. The system is currently in operation and can be inspected while it is running. Due to an expansion of our capacity, this system will be replaced by a larger, new Schuko extraction system. An interesting complete system for companies looking for a powerful used extraction/filtration system with a capacity of approximately 14,000 m³/h. Key features * Capacity: approx. 14,000 m³/h * Filter area: 125 m² * Main fan: 22 kW * Transport fan: 7.5 kW * 100 filter hoses Fgedpfxez Egzmj Afuoh * Electric/pneumatic filter cleaning * Antistatic filter material * Includes the corresponding control system * Complete system * Currently in use and can be inspected while running Technical data for the filter system Brand: Schuko Type: Ecovar 04 22020/25/125, through-flow Design: overpressure, static Number of elements: 1 Material extraction: transport fan Filter material: antistatic polyester needle felt, BIA, AWN 05 Diameter of filter hoses: Ø 160 mm Length of filter hoses: 2,500 mm Number of filter hoses: 100 pieces Filter fabric area: 125 m² Filter cleaning: electric/pneumatic Weight: approx. 2,000 kg Dimensions of the filter system (L × W × H): approx. 2,100 × 2,100 × 6,000 mm Main fan Brand: Schuko Type: S 450/O/L2 Connection diameter: Ø 450 mm Capacity: 14,100 m³/h at 3,412 Pa Motor power: 22 kW Drive: direct Transport fan Brand: Schuko Type: TSK 250/O/S4 Connection diameter: Ø 250 mm Capacity: 4,500 m³/h at 3,344 Pa Motor power: 7.5 kW Drive: indirect Design: reinforced Condition and availability The extraction system is currently operational and is being sold only because it is being replaced by a new Schuko system with a larger capacity. This provides the opportunity to inspect the system while it is running before dismantling. Availability upon consultation. Dismantling and transport upon consultation. Serious interest? Please feel free to contact us for additional information, photos, technical data, or to arrange an appointment to inspect the system while it is running.

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm Fjdevh Naqepfx Afusgh longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X387X00082, Year of construction: 2020, operating hours: 17,468 h, load capacity: 2,500 kg, lifting height: 3,000 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 3,000 mm Free lift: 1,500 mm Overall height: 2,000 mm Load capacity: 2,500 kg Fedpfx Asz I N Uzefuogh MACHINE DETAILS Mast type: Duplex Vehicle type: Electric 4-wheel forklift ISO class: ISO Class 2 = 1,000–2,500 kg Unladen weight: 3,230 kg Battery voltage: 80 V Operating hours: 17,468 h EQUIPMENT Semi-cab Telescopic forks Side shifter Fork positioner 3rd valve 4th valve External reference: SL15009SP

Condition: used, Manufacturer: Grenier - Charvet Fgedpfx Asx R Azxefujh Model: E 25 Type : High viscosity paste mixer   Motor power : 25 CV - 18 KW Speed variation: mechanical Previous use : Painting Agitation tool: approx. Ø 800 mm butterfly / cloverleaf type Vessel clamping: pneumatic Vertical movement: hydraulic unit

Condition: good (used), Year of construction: 1987, machine/vehicle number: 12871, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, oil tank capacity: 120 l, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DELEM, controller model: EA 22, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake - including foot switch and the bending tool located on the machine Fgsdpfoz I N D Nex Afueh FCA D-35614 Aßlar - loaded onto a truck

Condition: good (used), functionality: fully functional, 2 Index MS 25 E machines in very good condition and fully functional – also available individually – for sale. Fgodpozicxljfx Afush Inspection while the machines are powered on is possible.

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 9255, spindle speed (max.): 5,635 rpm, spindle speed (min.): 3,850 rpm, type of input current: three-phase, overall weight: 900 kg, center height: 125 mm, pivoting range: 350 °, travel distance X-axis: 410 mm, travel distance Y-axis: 205 mm, travel distance Z-axis: 310 mm, grinding spindle motor power: 550 W, input frequency: 50 Hz, input voltage: 380 V, year of last overhaul: 2026, workpiece length between centers: 685 mm, For sale is a professional, high-precision Universal Tool and Cutter Grinder, model NUA-25, manufactured by PONAR Wrocław. Known for its exceptionally rigid cast-iron construction and reliability, this machine is ideal for grinding and sharpening a wide range of cutting tools, drills, milling cutters, as well as surface and cylindrical grinding.The machine is the manual version, which is highly preferred by operators for its simple maintenance and direct control feel. It is in good working condition, original paint, and has been well-preserved. Included Accessories & Equipment (Large Lot): This offer includes a very valuable and comprehensive package of original attachments loaded on separate pallets: - Original dust extraction system (vacuum unit with hose) - Universal dividing/indexing head - Internal grinding attachment - Radius grinding attachment - Set of tailstocks (left & right) and steady rests - Tooth rest holders for spiral milling cutters - Assorted wheel dressers and profiling attachments - Large lot of tooling arbors, mandrels, and machine brackets Fedpfx Aszw D Dljfusgh

Condition: good (used), Year of construction: 2003, Bahmüller Double Champion 25/36, ref. 3050 Year 2003 Model DLN 25/36 SG Processes two-part or single-part blanks Max. width: 3600 mm Max. height: 2500 mm Fgsdpfez Iltmsx Afush Stitching speed: 850 staples per minute Suitable for 5 and 7-layer applications Includes gluing unit Stacker currently available

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage Fjdpfxez Eq Eps Afusgh DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: used, Year of construction: 2015, operating hours: 12,439 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, nominal power (apparent): 30 kVA, workpiece length (max.): 250 mm, workpiece width (max.): 250 mm, workpiece height (max.): 185 mm, operating hours of spindle: 12,439 h, number of slots in tool magazine: 20, input voltage: 415 V, type of input current: three-phase, Lumex Avance-25 by Matsuura, including automatic CAM software. For clarification: this is a machine that, during the melting process (all 10 layers in standard configuration with a layer thickness of 0.05 mm), also performs surface finishing through HSC milling. This means that the contour is milled to the exact dimensions every 0.5 mm, resulting in clean surfaces as typically seen in CNC milling. The Lumex Avance-25 is an excellent solution for those who want to participate in the world of hybrid additive manufacturing at the highest level. It combines laser sintering and milling in a single machining center. With its help, you can efficiently produce complex and precise parts while simultaneously benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Build volume: 250x250x185 Gallery of manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ With its robust design and proven performance, the Lumex Avance-25 is an investment that pays off. It offers a combination of reliability, precision, and efficiency, making it an excellent choice for any workshop or production line. Please do not hesitate to contact us for further information or to arrange a visit. We look forward to helping you discover the potential of the Lumex Avance-25 for your company. Further inventory and prices can be found at: inventar-verkauf.de/id/alesco Voltage: 415 V Voltage tolerance: ±10 % Frequency: 50 Hz Frequency tolerance: ±1 Hz Number of phases: 3 Capacity: 30 kVA Current: 41 A Short-circuit current: 30 kA If you have any questions or require further information, please feel free to send us a message or call us. Fgjdpfx Afszm Ub Hjujh

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW Fodpfxsv Raate Afuogh - 6 cross slides - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P

Condition: used, Year of construction: 2004, pressure 25 t throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 3,5 kW Fgjdpfjykb D Dox Afuoh weight of the machine ca. 2,8 t

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Machine Brand: Technica Fsdpfxjz Hmfbe Afusgh Machine Model : Rotaflex DV 25/15 The Construction Year : 2006 The machine will be refurbished before delivery. Made in Switzerland Number of Stations : 15 Stations Number of Modules : 14 Modules Number of Spindles : 26 Spindles Tool Holders : HSK-32 Condition of the Machine : Refurbished Complete electrical-electronical refurbishment, new Fanuc CNC control system Necessary mechanical refurbishment Accessories : 1) NORDMANN Tool Monitoring 2) Kraft&Bauer CO2 Fire Extinguishing System 3) STÄUBLI TX60 Robotic Arm 4) MAPAL Recessing Heads

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter Fedozzrwbjpfx Afuegh 50mm Round Holes, 8mm Thick All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Condition: good (used), Year of construction: 2008, Offer 26289 Approximate technical specifications: - CNC flame cutting machine with 2 torches, as shown in the picture - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Supporting table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons Fjdpfxozvnb Ss Afujgh - Without supporting table!

Condition: used, Year of construction: 1999, machine/vehicle number: 211237, functionality: unexamined, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 127 t, oil tank capacity: 250 l, Equipment: CE marking, safety light barrier, Used machine, includes many tools. Fsdpjzqux Tsfx Afuegh Cannot be tested. Collection only.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 1,300 kg, Cardboard clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2019, ISO 2A (41 cm), Capacity 1300 kg / 600 mm, Sideshift, Width 1150 mm, Clamps 1270x1200 mm, Opening range 440-1820 mm, ID OS2097. Fsdpfxjzz Ebgs Afuegh

Condition: excellent (used), Year of construction: 2011, Robust, Right-Sized Packaging System Automated machine for cardboard packaging, Cardboard cutting machine, Cardboard die-cutter, Cardboard manufacturing machine Packsize EM7-25 MT, year of manufacture 2011 Fsdpfxoz Ig E Rs Afusgh Weight EM7-25: 4,500 lbs EM7-35: 5,500 lbs Footprint with Bales EM7-25: 15' 8" x 10' 2" EM7-35: 15' 8" x 13' 5" Unlimited number of cardboard sizes and styles 15’ 8″ x 13’ 5” Fully-loaded footprint Max. 4 plies of corrugated cardboard in various grammages The EM7-25™ is a patented, automated machine for the “On-Demand Packaging” process, designed for use in a wide range of industries. The EM7-25™ system, developed in Sweden, offers a range of advanced features for cardboard production, including longitudinal and transverse cutting, scoring, perforating, and die-cutting of handles and openings. The machine supports the “Lean Packaging” concept and also enables material feed in the reverse direction (so-called *Back-Feeding*), allowing for an unlimited variety of cardboard designs that are precisely tailored to the respective product dimensions. The EM7-25™ model can be seamlessly integrated into the PackNet.Server® software, which is used for production control and process optimization. This provides those responsible for the packaging process with the necessary tools and analysis data to efficiently coordinate and control both single and series production, as well as highly complex processes in the manufacture of corrugated cardboard packaging. A configurable user interface provides easy access to local reports on machine operation and is controlled via an integrated control panel.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, good condition. Capacity: Up to 3000 products /h Product dimensions: Length: 160 - 400 mm, Height: 50 - 150 mm Power input: 5 kW Fgodpoylurkofx Afush Air: 6,0 bar Ready to ship

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm stroke 8 - 80 mm Fgedpsykb Dkefx Afueh no. of strokes 120 Hub/min ram adjustment 45 mm table surface area 800 x 580 mm clamping plate 800 x 450 mm ram surface Platte 575 x 220 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t