Used Ferromatik Milacron Injection Moulding Machine for sale (72,677)

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Kdodpew Ni Ibsfx Ag Aeu

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Kdodpfxjwl Rucs Ag Aju Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Kdsdpfozub Hrjx Ag Aeu Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: like new (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: H39A0200012, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: ML 3000-540, Serial Number: H39A0200012, Year: 2001, 3,000-ton clamping capacity; platen dimensions: 2.56 × 3.06 m, tie bar spacing (H × V): 1.70 × 2.11 m, knockout (KO) patterns: 3.15 × 0.41 m, 1.63 × 0.41 m, 1.83 × 0.41 m, and 1.83 × 0.71 m, mold height: 0.60 m, maximum daylight: 3.70 m, ejector stroke: 0.40 m, Air Eject, oil capacity: 2,669 L. Approximate overall dimensions: 15.42 m long × 4.70 m wide × 3.66 m high. Equipped with YUSHIN Cartesian Robot, Model: MKA, Serial Number: A245158, 220 V. Machine in full operating condition. Please inspect. ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: ML 3000-540, número de serie: H39A0200012, año: 2001, capacidad de cierre de 3,000 toneladas. platina de 2.56 × 3.06 m, distancia entre barras (H × V) de 1.70 × 2.11 m, patrones de expulsión (KO Patterns) de 3.15 × 0.41 m, 1.63 × 0.41 m, 1.83 × 0.41 m y 1.83 × 0.71 m, altura de molde de 0.60 m, apertura máxima (Max. Daylight) de 3.70 m, carrera de expulsión de 0.40 m, Air Eject, capacidad de aceite de 2,669 L. Dimensiones generales aproximadas: 15.42 m largo × 4.70 m ancho × 3.66 m alto. Equipada con: Robot Cartisano marca: YUSHIN, modelo: MKA, número de serie: A245158, 220V. Máquina en completa operación. favor de inspeccionar. Kodsz Svrpspfx Ag Ajdu

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. Kdjdpfxswm Iz Ne Ag Aeu ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Year of construction: 1995, condition: ready for operation (used), A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible. Kdsdowut Htjpfx Ag Asu

Condition: good (used), Year of construction: 2023, operating hours: 50 h, Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Year of manufacture 2023 Kjdpfx Ajw Ebpwsg Ajdu Machine hours 50 hours Clamping force 2,800 kN Screw diameter 60 mm Injection pressure 2,238 bar Maximum shot volume 905 cm³ Max. distance between tie bars 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1,400 mm Dimensions (LxWxH) 8,500 x 2,100 x 2,500 mm Weight 18,400 kg

Condition: like new (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: H23A0194018, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: VL 1500-288, Serial Number: H23A0194018, Year: 1994, 1,500-ton clamping capacity; platen dimensions: 2.20 × 1.94 m, tie bar spacing (H × V): 1.58 × 1.32 m, knockout (KO) patterns: 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, 1.63 × 0.41 m, and 1.93 × 0.41 m, mold height with ejector box and 2 ram spacers: 0.44 m, maximum daylight: 1.97 m, ejector stroke: 0.26 m, Core Pull, Air Eject, oil capacity: 2,195 L. Approximate overall dimensions: 13.81 m long × 3.70 m wide × 2.56 m high. Equipped with YUSHIN Cartesian Robot, Model: YCII-1300S-35-21, Serial Number: A132862, 220 V. Machine in full operating condition. Please inspect. Kedpsz Svp Ijfx Ag Aedu ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: VL 1500-288, número de serie: H23A0194018, año: 1994, capacidad de cierre de 1,500 toneladas; platina de 2.20 × 1.94 m, distancia entre barras (H × V) de 1.58 × 1.32 m, patrones de expulsión (KO Patterns) de 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, 1.63 × 0.41 m y 1.93 × 0.41 m, altura de molde con caja de expulsión y 2 espaciadores de pistón de 0.44 m, apertura máxima (Max. Daylight) de 1.97 m, carrera de expulsión de 0.26 m, Core Pull, Air Eject, capacidad de aceite de 2,195 L. Dimensiones generales aproximadas: 13.81 m largo × 3.70 m ancho × 2.56 m alto. Equipada con Robot Cartisano marca: YUSHIN, modelo: YCII-1300S-35-21, número de serie: A132862, 220V. Máquina en completa operación. Favor de Inspeccionar.

Condition: like new (used), functionality: fully functional, machine/vehicle number: B-12, 1 CINCINNATI MILACRON Plastic Injection Molding Machine, Machine No. B-12, 500-ton clamping capacity, hydraulic clamping unit, 3.93 in (100 mm) screw diameter, 12.13 in² barrel area, general-purpose screw, 6.70 intensification ratio, 2,640 psi maximum hydraulic pressure, 17,582 psi maximum plastic pressure, 14.17 in maximum shot size, 2,693 g injection capacity, 43.30 in vertical x 43.00 in horizontal tie-bar spacing, 16.00 in minimum mold height, and 55.10 in maximum clamp opening. ESPAÑOL: 1 Máquina inyectora de plástico MARCA Cincinnati Milacron, No. de máquina B-12, capacidad de cierre de 500 Ton, unidad de cierre hidráulica, diámetro de tornillo de 3.93 in (100 mm), área de barril de 12.13 in², tornillo tipo general, coeficiente de intensificación de 6.70, presión hidráulica máxima de 2,640 psi, presión plástica máxima de 17,582 psi, tamaño máximo de disparo de 14.17 in, capacidad de inyección de 2,693 g, distancia entre barras de 43.30 in vertical x 43.00 in horizontal, altura mínima de molde de 16.00 in y apertura máxima de clamp de 55.10 in. Kdsdpsz Svu Dofx Ag Aju

Condition: used, Year of construction: 2011, operating hours: 40,885 h, overall weight: 6,500 kg, displacement volume: 49 cm³, clamping force: 110 kN, injection pressure: 2,236 bar, screw conveyor diameter: 18 mm, terms of delivery: EXW (ex Works) delivery time: on request Ksdpfjw N Egajx Ag Ajdu terms of payment: 100% prior to delivery

Condition: like new (used), machine/vehicle number: B-03, 1 Plastic Injection Molding Machine, Cincinnati Milacron, Machine No. B-03, 500-ton clamping capacity, hydraulic clamping unit, 3.15 in (80 mm) screw diameter, 1,531 g injection capacity, 2,610 psi maximum hydraulic pressure, 20,880 psi maximum plastic pressure, 12.60 in maximum shot size, 34.30 x 34.30 in tie-bar spacing, 8.50 in minimum mold height, and 55.10 in maximum clamp opening. Kdedpfoz Svuwex Ag Asu ESPAÑOL: 1 Máquina inyectora de plástico MARCA Cincinnati Milacron, No. de máquina B-03, capacidad de cierre 500 Ton, unidad de cierre hidráulica, diámetro de tornillo 3.15 in (80 mm), capacidad de inyección 1,531 g, presión hidráulica máxima 2,610 psi, presión plástica máxima 20,880 psi, tamaño máximo de disparo 12.60 in, distancia entre barras 34.30 x 34.30 in, altura mínima de molde 8.50 in y apertura máxima de clamp 55.10 in.

Year of construction: 2018, condition: used, There are six Arburg ALLROUNDER 320C 500-170 available, year of manufacture: 1x 2006, 1x 2008, 2x 2012, 1x 2013, 1x 2018, an on-site inspection is possible. Ksdpfxez Sr Rne Ag Asdu

Condition: like new (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: H26A0196003, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: VL 3000-540, Serial Number: H26A0196003, Year: 1996, 3,000-ton clamping capacity; platen dimensions: 3.00 × 2.57 m, tie bar spacing (H × V): 2.14 × 1.70 m, knockout (KO) patterns: 1.32 × 0.41 m, 1.63 × 0.41 m, and 1.93 × 0.41 m, mold height: 0.86 m, maximum daylight: 2.83 m, ejector stroke: 0.35 m, 3 Core Pulls, Air Eject, oil capacity: 8,781 L. Approximate overall dimensions: 16.37 m long × 4.44 m wide × 3.68 m high. Equipped with MKA Cartesian Robot, Model: YCII-1300S-35-21, Serial Number: A132862, 220 V. Machine in full operating condition. Please inspect. Kdjdpfxjz Svrvj Ag Asu ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: VL 3000-540, número de serie: H26A0196003, año: 1996, capacidad de cierre de 3,0000 toneladas. platina de 3.00 × 2.57 m, distancia entre barras (H × V) de 2.14 × 1.70 m, patrones de expulsión (KO Patterns) de 1.32 × 0.41 m, 1.63 × 0.41 m y 1.93 × 0.41 m, altura de molde de 0.86 m, apertura máxima (Max. Daylight) de 2.83 m, carrera de expulsión de 0.35 m, 3 Core Pull, Air Eject, capacidad de aceite de 8,781 L. Dimensiones generales aproximadas: 16.37 m largo × 4.44 m ancho × 3.68 m alto. Equipada con: Robot Cartisano marca: MKA, modelo: YCII-1300S-35-21, número de serie: A132862, 220V. Máquina en completa operación. Favor de Inspeccionar.

Condition: like new (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: H23A0196006, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: VL 1500-362, Serial Number: H23A0196006, Year: 1996, 1,500-ton clamping capacity; platen dimensions: 2.20 × 1.94 m, tie bar spacing (H × V): 1.57 × 1.32 m, knockout (KO) patterns: 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, 1.63 × 0.41 m, and 1.93 × 0.41 m, mold height with ejector box and 2 ram spacers: 0.44 m, maximum daylight with ejector box and 2 ram spacers: 1.97 m, ejector stroke: 0.26 m, Air Eject, oil capacity: 2,195 L. Approximate overall dimensions: 13.81 m long × 3.70 m wide × 2.56 m high. Equipped with YUSHIN Cartesian Robot, Model: YAII-1300S-21, Serial Number: 28505001, 220 V. Machine in full operating condition. Please inspect. ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: VL 1500-362, número de serie: H23A0196006, año: 1996, capacidad de cierre de 1,500 toneladas. platina de 2.20 × 1.94 m, distancia entre barras (H × V) de 1.57 × 1.32 m, patrones de expulsión (KO Patterns) de 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, 1.63 × 0.41 m y 1.93 × 0.41 m, altura de molde con caja de expulsión y 2 espaciadores de pistón de 0.44 m, apertura máxima (Max. Daylight) con caja de expulsión y 2 espaciadores de pistón de 1.97 m, carrera de expulsión de 0.26 m, Air Eject, capacidad de aceite de 2,195 L. Dimensiones generales aproximadas: 13.81 m largo × 3.70 m ancho × 2.56 m alto. Equipada con: Robot Cartisano marca: YUSHIN, modelo: YAII-1300S-21, número de serie: 28505001, 220V. Máquina en completa operación. Favor de inspeccionar. Kdedpfxjz Svrcj Ag Asu

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Ksdpfx Agewm Iy Eo Ajdu Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: like new (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 3922A01/925, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: VL 1500-232, Serial Number: 3922A01/925, Year: 1992, 1,500-ton clamping capacity; platen dimensions: 1.94 × 1.94 m, tie bar spacing (H × V): 1.32 × 1.32 m, knockout (KO) patterns: 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m, and 1.63 × 0.41 m, mold height with ejector box and 2 ram spacers: 0.44 m, maximum daylight with ejector box and 2 ram spacers: 1.97 m, ejector stroke: 0.26 m, Gas Assist, Air Eject, oil capacity: 2,195 L. Approximate overall dimensions: 13.81 m long × 3.70 m wide × 2.56 m high. Equipped with YUSHIN Cartesian Robot, Model: YCII-1300S-35-21, Serial Number: A132861, 220 V. Machine in full operating condition. Please inspect. Kdodoz Svqxopfx Ag Aju ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: VL 1500-232, número de serie: 3922A01/925, año: 1992, capacidad de cierre de 1,500 toneladas. platina de 1.94 × 1.94 m, distancia entre barras (H × V) de 1.32 × 1.32 m, patrones de expulsión (KO Patterns) de 0.71 × 0.15 m, 1.02 × 0.25 m, 1.32 × 0.41 m y 1.63 × 0.41 m, altura de molde con caja de expulsión y 2 espaciadores de pistón de 0.44 m, apertura máxima (Max. Daylight) con caja de expulsión y 2 espaciadores de pistón de 1.97 m, carrera de expulsión de 0.26 m, Gas Assist, Air Eject, capacidad de aceite de 2,195 L. Dimensiones generales aproximadas: 13.81 m largo × 3.70 m ancho × 2.56 m alto. Equipada con: Robot Cartisano marca: YUSHIN, modelo: YCII-1300S-35-21, número de serie: A132861, 220V. Máquina en completa operación. Favor de inspeccionar.

Condition: used, Wittmann Battenfeld 3 Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Kjdpfx Agjzpwrge Ajdu Calculated displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Clear tie bar distance: 370 x 420 mm Minimum mold height: 200 mm Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Disassembly and collection must be carried out by the buyer. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2015, condition: used, There are two Arburg ALLROUNDER 270S 350-70 available, an on-site inspection is possible. Kdodpfjz S It Ssx Ag Asu

Year of construction: 2019, condition: used, There are two Arburg ALLROUNDER 420C 1000-290 GOLDEN EDITION available, year of manufacture: 1x 2011, 1x 2019, an on-site inspection is possible. Kedpfx Agez Sr Rzo Aedu

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 Kodpfx Agevdqbhe Ajdu 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Kdjdpfoibyatjx Ag Aju Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (available for an additional charge) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (extra charge for high-speed operation) Wemo 6-5 xDesign robot Year of manufacture: 2017 Kodpfxez Ipfmj Ag Ajdu 4-axis robot: 3 axes driven by electric servomotors Robot safety package included Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR net (price without robot)

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Kjdpez Hn Spjfx Ag Ajdu

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Kjdpfx Aezhpg Tog Ajdu

Condition: used, Ferromatik mixing screw Ø 70 mm for IU2495 and IU2650- removed from Ferromatik K-Tec 450 - removed from IU2495 - removed from running machine Kedpfx Agjyxg Tbo Asdu - fully functional- inlet: 69.80 mm - center: 69.80 mm - outlet: 69.80 mm - total length: 225.80 cmmanufacturer: Ferromatik Milacron