Used Fischer Xdl-Xymz for sale (241)

Condition: good (used), Helmut Fischer XDL-XYmZ X-ray Fluorescence Spectrometer For sale is a professional X-ray fluorescence (XRF) spectrometer from Helmut Fischer GmbH + Co, model XDL-XYmZ. Power: 120 W Voltage: 230 V / 50–60 Hz Model number: XDL-XYmZ Made in Germany This device is ideally suited for precise material analysis in the laboratory, quality control, and industrial environments. Condition: Used (see pictures). Note: Guodpfxoxltm Ej Acaeh For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Helmut Fischer Fischerscope X-ray fluorescence Coating thickness measurement XDL XDL-B XYmZ Gsdpfx Aow Hbimjcaouh

Condition: excellent (used), HELMUT FISCHER Gsdpfx Aez Egi Rscasuh X-ray fluorescence measuring device / film thickness measuring device FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for film thickness and material analysis For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive film thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional layers, anti-corrosion layers, and various metallic coatings, and is used in quality assurance, laboratories, research, and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive film thickness measurement Suitable for functional layers and anti-corrosion layers Large measuring chamber with C-shaped slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Power connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Additional accessories as shown in the pictures Areas of application: Film thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is sold explicitly as is and without warranty. The table shown in the photos, as well as other items not explicitly mentioned, are not part of the sale. Due to its size and weight, shipping can be arranged via a freight forwarder. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Gjdpfsyu Nabex Acasuh Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Condition: used, Year of construction: 2005, sheet width 3100 mm plate thickness 12 mm distance between columns 3260 mm back stop - adjustable 3 - 1250 mm power capacity 37 kW Godoz Sdyvjpfx Acaeuh voltage 400 V weight of the machine ca. ca. 14 t dimensions of the machine ca. 4,00 x 4,00 x 2,20 m CNC-controlled plate shear

Condition: good (used), Year of construction: 2016, Conveyor belt 155 x 20 cmLabels up to 12 cm wideLabel applicator width adjustable to applicate labels on different places above the beltHeight adjustable, for products up to 20 cm highSupplied with a Zebra ZE500-4 printer Godpsz Rgtbjfx Acasuh More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: SFV 80-N, Included with the machine: A wide selection of different forming dies for packaging timber products with various cross-sections. Machine documentation and operating manuals. Gsdpfx Aszuwcpocaouh Suitable for packaging planed timber and various other wood products. The machine can be inspected and tested on-site: Observe the machine in operation. Perform a test run. Inspect the operation of the rollers, chains, and other mechanisms. Inspect all included forming dies. The machine is operating correctly and is ready for production.

Condition: used, Year of construction: 1995, Overall height: 6200 mm Godpfx Asz Nhk Sjcajuh Column + legs (4 pieces), leg extension: 1400 mm Arm length: 1250 mm (12 pieces) Column connectors: (9 pieces), 1040 mm

Condition: excellent (used), Year of construction: 2013, Granite measuring plate Guodpfx Aezmidcscaoh Dimensions: 150 x 140 x 32 cm, weight: 2700 kg Base frame 4 hydraulic buffers Last calibration: 2023

Condition: used, Year of construction: 1986, functionality: fully functional, Hydraulic CNC plate shear Fischer DHS 10 / 3000 Maximum cutting length / sheet width: 3,000 mm Maximum sheet thickness, normal steel: 10 mm Maximum sheet thickness, stainless steel / V2A: approx. 6 mm Control: CNC-controlled back gauge Gusdezl Twqspfx Acajh Machine weight: approx. 7.5 to 9.0 tons Installation dimensions L x W x H: approx. 3.80 m x 2.20 m x 2.00 m

Condition: used, Year of construction: 1995, Brand: FISCHER Overall height: 3150 mm Arm length: 1200 mm Base length: 1000 mm Set: Column + Base: 3-part (1 piece longer) Arms: 6-part Gusdpoz Nhlvefx Acaeh Column connector: 4-part Distance between columns: 1040 mm

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 4633, total width: 1,800 mm, total length: 10,000 mm, total height: 2,140 mm, Working machine in exellent condition from German production System consists of Gsdpfxszhk Avj Acasuh 1 x Honsel type: F13, serial number: 4633 1 x Fischer & Kreck, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints Gusdpjzuz Hlefx Acaoh - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, total width: 800 mm, total length: 1,200 mm, table height: 860 mm, plate height: 160 mm, For sale is a used measuring table in very good condition. The stone plate is undamaged and in very good condition. Plate dimensions: Length: 1200mm Width: 800mm Height: 160mm Gjdozuxt Nepfx Acaeuh Height from the floor to the top edge of the plate: 860mm Center height: 200mm Flatness: DIN 876, accuracy class: 1

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER Gsdez A Aw Ejpfx Acaeuh PRESSURE: 5 x 80 tons TABLE DIMENSIONS: 800 x 560 mm STROKE LENGTH: 500 mm

Condition: used, Year of construction: 1999, HYDRAULIC PRESS FISCHER PRESSURE: 5 x 80 tons Gjdez A Am Hepfx Acajuh TABLE DIMENSIONS: 800 x 560 mm STROKE LENGTH: 500 mm

Condition: good (used), Year of construction: 2005, operating hours: 7,500 h, functionality: fully functional, machine/vehicle number: 3149, Fischer&Krecke Flexpress 16S with 1250 mm printing width. The machine is still in operation and can be viewed at any time. Fully functional and in well-maintained condition. Guedjxqmn Tjpfx Acaoh

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Gujdpfxjzdumqe Acaeh

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Guodezuzptepfx Acaeh Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, functionality: unexamined, total height: 340 mm, total width: 460 mm, total length: 700 mm, overall weight: 50 kg, Ferwood Code: RU0001789 - Manufacturer Code: MW 13,5Y10-4 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - If interested, we offer a refurbishment service; please contact us. Guedpoz Dumbefx Acaoh

Condition: good (used), Johann Fischer Aschaffenburg / Surface Plate / Measuring Table with Base Cabinet Gjdpfsy Shaiex Acajuh - Surface plate with substructure (mobile) - Table size: 1.5x0.6 meters - Accuracy: DIN 876 /1 - Mobile on base cabinet with drawers Dimensions (LxWxH): 1.5x0.6x0.9 meters / 550 kg Subject to errors and input mistakes.

Condition: used, Year of construction: 1975, Press brake manufactured by FISCHER, model HAKS 10/3200. Pressing force approximately 100 tons. Year of manufacture 1975. Brief summary provided – a full technical translation will follow if required for this lot. Godpfjzymazox Acaeuh

Condition: used, Year of construction: 2007, - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 Veneer shear Manufacturer: Fischer & Rückle / Monguzzi Year of manufacture: 2007 Veneer shear with milling unit and gluing unit for butt joint gluing - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) Gsdpfszuzqqex Acaeuh - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 - Length: 7 m - Width: 3 m - Height: 2 m Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Gujdpfx Aszuz Hfscajh Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Year of construction: 1990, condition: used, Capacity: 250 hl/h Guedpfozty Hnex Acash Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65