Used Fitzpatrick Model L89 Chilsonator for sale (17,048)

Condition: used, Used Fitzpatrick Chilsonator stainless steel system with Fitzpatrick model M5A comminutor. - Manufacturer: Fitzpatrick - Model: L89 - Material: Product contact parts stainless steel AISI 316 - Feed system: Horizontal and vertical screw. - Roll diameter: 8" Gjdpfx Ajzun Euebfjka - Roll width: 2" - Roll pressure: Air hydraulic booster system (ENERPACK BOOSTER) Fitzpatrick Fitzmill - Model: M5A - Material: Product contact parts stainless stell AISI 316 - Rotor speed: 1000 - 3000 rpm - Drive: 3 HP Includes: control panel. Specifications: Number Of Rolls: 2 Roll Width: 2 Roll Diameter: 8 Material Of Construction: Stailness Steel

Condition: used, Used Fitzpatrick Chilsonator stainless steel system with Fitzpatrick model M5A comminutor. Gsdpfx Asxd Alnjbfeka - Manufacturer: Fitzpatrick - Model: L89 - Material: Product contact parts stainless steel AISI 316 - Feed system: Horizontal and vertical screw. - Roll diameter: 8" - Roll width: 2" - Roll pressure: Air hydraulic booster system (ENERPACK BOOSTER) Fitzpatrick Fitzmill - Model: M5A - Material: Product contact parts stainless stell AISI 316 - Rotor speed: 1000 - 3000 rpm - Drive: 3 HP Includes: control panel.

Condition: used, Bushing Cutoff Gkodpfjzt Tauex Abfoa IAC Enclosure

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 Gedpfx Aboztn I Hefska The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Gkedpfxjzmu I To Abfea Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: good (used), Fitzpatrick L1A Fitzmill Gjdpfsrxdp Njx Abfoka 2006, stainless, duel sided knives, 150mm rounded cutting chamber, for wet and dry produce, two boxes of spare parts, mounted on mobile frame

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Gsdpfx Abeziyvhefjka Power supply: 230V Machine weight: 80kg

Condition: excellent (used), Original Stryker Stair-Pro stair chair, model 6252, designed for the safe transport of patients up and down stairs. Equipped with a track system that significantly reduces the effort required by rescuers and increases control during descent. Robust aluminum construction, high load capacity (approx. 227 kg), complete set of safety belts, and foldable components for ease of transport and storage. The equipment is fully operational, complete, and in very good visual condition – ready for immediate use. Made in the USA. Ideal for EMS teams, fire departments, hospitals, ERs, and nursing homes. Key features: • Model: Stair-Pro 6252 • System: track system (safe stair descent) • Load capacity: up to approx. 227 kg • Construction: lightweight and durable aluminum frame Gedpfx Aox N Idcjbfjka • Safety: securing belts, stable handles • Condition: used, very good, fully functional • Manufacture: Made in USA

Condition: excellent (used), Ferno Model 59 T EZ Glide – stair transport chair, 227 kg. Professional evacuation and transport chair by Ferno with EZ Glide system, designed for the safe descent of patients down stairs. Sturdy aluminium frame, complete set of safety straps, foldable components for easy transport and storage. The equipment is functional, well-maintained, and ready for use. Ideal for EMS, fire services, hospitals, and care facilities. Price listed per unit. Gkjdpfxsx N Ic Eo Abfea

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Godpfx Abevbdyfefska Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET • Original “Made in Japan” quality Gkedpew Rdt Iefx Abfja • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: good (used), AFOS Defroster Model T1000 Defrost Twin Chamber Fully stainless steel Complete with refrigerator unit Godpfx Aex Ey Ufsbfeka 400 v / 80 amps

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Godortrzdspfx Abfeka Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Gedpjrtryksfx Abfska Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Gsdpsymaxfefx Abfeka

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Dimensions: 700mm X 1450mm Gkedpfx Absyz R Unefea

Condition: used, Used Cuccolini model VPM900 2/X stainless steel 3-deck screen. Screen measures approximately 900mm diameter. Unit has 0.73Kw, 1440rpm BOMEC vibrator motor. Weight: Estimated: Kg200.0 Dimensions: 1100mm X 1100mm Gkedpfjygvncox Abfea Equipped With: Fitted with 300 micron & 500 micron ball tray screens. Can also include spare 710micron ball tray screen.

Condition: good (used), Year of construction: 2014, 2014 Donaldson Torit Dust Extractor CPV4 Model 21640 Gkodpfxjzt Iy Ae Abfja Airflow Capacity 1,400-2,700cfm Using 4 Advanced PowerCore Filter Packs. Overall Dimensions L1,297 x W1,264 x H1,016mm. Weight 261kg. S/No. 4482926 L1.

Condition: used, Used Zeppelin / Henschel Model FM1000 stainless steel high intensity mixer. Approximate capacity: 1,000 litre (product dependent). Stainless steel mixing chamber rated atmospheric pressure at 200°C. External mild steel heating / cooling jacket rated 5 bar pressure at 95°C. Unit includes 3-tier mixing attachment bottom driven by 250 kW, 1490 rpm, 280/660 V, 50/60 Hz motor. Has a top-clamped lid. Includes pneumatically operated discharge valve. Gkodpfszun Hfjx Abfea

Condition: used, Used IKA model DR 2000/30 ATEX stainless steel Dispax-Reactor. Maximum flow rated 4,000 l/h, Maximum viscosity 5000mPas (product independent). Driven by approximately 58kw electric motor. Includes frequency inverter. Gkjdszun Ebjpfx Abfja

Condition: used, Very little used molecular/short path distillation pilot plant by UIC GmbH (DE) model KD10. Designed for gentle and continuous processing of thermally sensitive materials. The short residence time and high-vacuum operation make it suitable for applications, where thermal stress, product degradation and purity are critical. Typical applications include: - pharmaceutical intermediates - fine chemicals Gkjdpjzunuvefx Abfoa - nutraceutical ingredients - botanical extracts - cosmetic ingredients - high-value oils, - lipids flavours and fragrances Heating surface: 0.1 m2 Feeding rate from 1 to 2 kg/h Condition: limited pilot trials only, no routine production use. Currently machine stored. Stainless steel contact parts and supporting frame. Shipping dims: L 254 cm x W 81 cm x H 211 cm x weight 1500 kg Technical documentation included.

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Gksdpfx Ajykn Sbjbfja Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted).

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Gedpfxsymayio Abfeka Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: used, Reportedly unused since refurbished Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts in 316/316L stainless steel. Approximate capacity 27 to 36 litre working capacity (product dependent). (2) 316/316L stainless steel z-blades driven by 4kw, 3/50, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum rated hood/lid with clamps. External 304/304l stainless steel jacket rated 3.5 bar working pressure at 150 deg.c. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Has control panel for mixer and chiller operation. Gsdoymazaopfx Abfska

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Gkjdpfx Aboymazgsfoa Material: Stainless Steel (321) Capacity: 400 litre (product Dependent) Mixing Chamber: 1,300mm long x 800mm Diameter Type Of Blades: T-Arm Blades Motor: 5.5kW Motor and Gearbox Also Includes: External Mild Steel Jacket Provision for One Chopper but None Currently Fitted. Specifications: Bowl Volume: 105.7 gal Motor Power: 5.5 hp Material Of Construction: Stainless Steel (321) Choppers (Y/N): No Jacket (Y/N): Yes Dimensions: 1300mm long x 800mm Diameter