Used For Sale Is A Hein Baking Oven System for sale (91,383)

Condition: used, functionality: fully functional, Year of construction: 2012, DUE TO CHANGEOVER TO HEUFT THERMAL OIL OVEN TECHNOLOGY WE OFFER: Isdpfx Aeu Uubhsbbstf Used HEIN oven system 5 StoneRoll 2 Ecostone² with baking technology 5 HEIN STONEROLL ANNULAR TUBE DECK OVENS ▪ TYPE: SR 106 3/8 ▪ 3 BAKING TRAYS 1000 X 600 PER SHELF ▪ 8 LEVELS = 24 BAKING TRAYS ▪ BAKING SURFACE: 14.4 M² ▪ USABLE HEIGHT PER DECK ~ 178.7 MM ▪ EXTERNAL DIMENSIONS: 1900 X 2500 X 3590 (BHT) ▪ BURNER: OIL ▪ WITH TROLLEY DRIVE ▪ YEAR OF CONSTRUCTION: 2012 ACCESSORIES: ▪ 15 BAKING TROLLEYS WITH 8 TRAYS ▪ 2 STONE TROLLEYS ▪ 1 LOADING TROLLEY ▪ 1 UNLOADING TROLLEY ▪ 1 COOLING TROLLEY 2 HEIN ECOSTONE² RACK OVENS ▪ TYPE: LR1-108-5-D ECOSTONE ▪ ROTATING PLATE ▪ FOR BAKING TRAYS 1000 X 600 ▪ BAKING SURFACE: 12 M² ▪ EXTERNAL DIMENSIONS: 175 X 168 X 2970 (TBH) ▪ CONNECTED LOAD ACCORDING TO MANUFACTURER: 100 KW ▪ BURNER: OIL ▪ TOUCHSCREEN COMPUTER CONTROL ▪ YEAR OF CONSTRUCTION: ONE OVEN BUILT IN 2019, ONE OVEN BUILT IN 2017 Below are the key details: • Loading: We will load the equipment onto the buyer’s trucks. • Condition: Sold as seen on site, without installation or warranty. • Inspection: The ovens are currently operational and can be visited for inspection at their location in St. Vith, Belgium, near the German border. Note: All information is provided to the best of our knowledge but without guarantee. Errors, prior sale, and technical changes are reserved. There may be deviations from the listed accessories.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Itsdpfeyniz Eox Abbef Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. Iodpeuxmt Tofx Abbstf The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Itodpfx Absb Rnv Sobjf Startup type negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Itsdpsxu Upmofx Abbof Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in) Ijdju Ibhwspfx Abbstf  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch)  Workpiece movement speed: up to 45.72 cm (18 in) per second  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each)  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port  Operating system: Windows (recommended Windows10)  Hewlett Packard HP driver  Trusted by professionals in 55 countries worldwide!

Condition: new, Year of construction: 2026, TITAN DOUBLE Trade Industrial Company AB is a Polish manufacturer of modern professional equipment trusted by professionals in over 55 countries worldwide. Industrial printer TITAN DOUBLE is designed for inkjet large format contactless full-color CMYK printing. OUR ADVANTAGES = YOUR BENEFITS: TITAN DOUBLE The new printing machine from TICAB PRINT has two print heads. Now, you can print in a single pass on large items. Your benefits: • Enhanced workflows. • Wider range or samples to print on. • More comfort during printing. We are official partners of the Hewlett Packard Company. You can get the TITAN DOUBLE printing machines at the manufacturer’s price. Online education and full technical support is provided. KEY FEATURES of TITAN DOUBLE: 1) Average printing speed is 50 units per minute. 2) The opportunity to print from 1 copy without increased cost per piece. 3) No preparations or cliches are needed. 4) Low cost per copy is from 0.01 euro/unit (you will see an accurate amount on the monitor during printing). 5) Printing on different materials: paper, carton (assembled and disassembled boxes), textile, wood, and plywood. 6) Branded software from TICAB PRINT (included in the printer's price). 7) Printer's components and accessories of our own design and production. TITAN DOUBLE is an innovative printing system. It allows you to feed huge items beneath the printer head. Printer heads can be adjusted up to 10 cm above the conveyor belt. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches. and water after the image dries. Technical Characteristics of the Printer head: Print area width - up to 59.4cm (23.4 in) Print area length - from 2.54 cm (1 inch) to 91.44 cm (36 inch) Workpiece movement speed - up to 45.72 cm (18 in) per second Printing speed - up to 50 arc\ min A4, up to 16 arc\ min A3 Print resolution - 1200x1200dpi Colors - CMYK (Cyan, Magenta, Yellow, Black) Ink type - water-based pigment ink Information connection - Ethernet 10/100/1000 Base-T network port Operating system - Windows (recommended Windows10) Hewlett Packard HP driver TICAB software: The current status of the printer is being monitored. Number of prints is calculated - the total and the current task. Iedpfxsvt Uvzj Abbjtf The calculation of the value of ink consumption. Monitoring the current level of ink in the cartridges. Starting the printer nozzle maintenance and cleaning functions. Starting the procedures for replacing the cleaning mechanism. Calibrate the printer nozzles for linearity and color uniformity. Start the procedure for high-speed printing of a large number of copies.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is designed for automatic crack detection on ring-shaped components such as bearing races and gears, using the eddyvisor C. Additionally, customers can test for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot handles and guides the sensor precisely along the contours of the test piece. Iodsyx E D Eopfx Abbotf The machine conducts tests using up to two probes. All relevant scan parameters and communication for controlling the eddyvisor C are integrated into the robot’s scanning program. At the heart of the system is the eddyvisor C 2-channel eddy current tester, which ensures reliable detection of cracks and grinding burn. Process automation is managed by an integrated Stäubli TX2-60 robot. The entire system is controlled and operated via a control cabinet featuring an integrated control and operator panel. A vertical spindle with a chuck securely clamps each test part during inspection. Non-conforming parts (NOK) detected during testing are automatically sorted onto two dedicated NOK discharge lanes. A separate staging area for reference and master parts supports calibration and continuous quality assurance during testing. The system includes the Optical Reflection Sensor by ibg (iORS) for precise, non-contact inspection of rings. For further information, please visit our website.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 2,800 mm, total width: 410 mm, overall weight: 800 kg, operating hours: 50 h, We offer this very good Griggio Tornado Limited Edition thickness planer, year of construction 1999. If you have any questions or need more information, feel free to send us a message or give us a call. Itodpfoyz Tmmox Abbef

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation Iodpfsyuvq Tox Abbstf 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Condition: good (used), power: 264 kW (358.94 HP), fuel type: diesel, color: yellow, Year of construction: 2023, operating hours: 8,108 h, Equipment: air conditioning, Technical information Track width: 65 cm Drive: Track Make of engine: SAA6D140E-5 Empty weight: 41.700 kg Condition Technical condition: good Visual appearance: good Identification Serial number: KMT0D105TPC088980 Other information Delivery terms: EXW Transport dimensions (LxWxH): 8.68x4.13x3.51 Production country: JP Additional information Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = Itodpfsyzwqisx Abbof - Single shank ripper

Condition: good (used), power: 264 kW (358.94 HP), fuel type: diesel, color: yellow, Year of construction: 2024, operating hours: 7,278 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMT0D105APC089054 Technical information Track width: 65 cm Drive: Track Make of engine: SAA6D140E-5 Empty weight: 41.700 kg Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 8.68x4.13x3.51 Production country: JP Additional information Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = Itedpfeyzl D Rjx Abbof - Single shank ripper

Condition: good (used), power: 264 kW (358.94 HP), fuel type: diesel, color: yellow, Year of construction: 2023, operating hours: 9,189 h, Equipment: air conditioning, General information Field of application: Construction Serial number: KMT0D105JPC088983 Technical information Track width: 65 cm Drive: Track Make of engine: SAA6D140E-5 Empty weight: 41.700 kg Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 8.68x4.13x3.51 Production country: JP Additional information Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Itodpsyzwqcefx Abbef = Additional options and accessories = - Single shank ripper

Condition: good (used), power: 264 kW (358.94 HP), fuel type: diesel, color: yellow, Year of construction: 2024, operating hours: 7,222 h, Equipment: air conditioning, General information Field of application: Construction Isdoyzl Ebspfx Abbjtf Serial number: KMT0D105EPC088958 Technical information Track width: 65 cm Drive: Track Make of engine: SAA6D140E-5 Empty weight: 41.700 kg Condition Technical condition: good Visual appearance: good Other information Emission level: Stage II / Tier II Delivery terms: EXW Transport dimensions (LxWxH): 8.68x4.13x3.51 Production country: JP Additional information Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Single shank ripper

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Itodpfx Asyxz Rnobbof Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis.

Year of construction: 2000, condition: used, Year of manufacture: Feb 2000 New: No Itodperllzksfx Abbsf No guarantee. Please contact us if you can't find what you are looking for

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Key Features of KR2i TFF System: Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Iedexwc Euepfx Abbotf Tablet control for ease of operation and real-time monitoring IP33-rated plastic enclosure is easy to clean Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 2,500 mm, total width: 700 mm, load capacity: 750 kg, total length: 5,300 mm, number of shelf rows: 5, shelf length: 1,700 mm, For sale: Metal display rack for carpets, rugs, and curtains. The rack is new, with external dimensions 5300x2400x700 mm (LxHxW), color anthracite grey, RAL 7016. The sliding system operates on rollers and galvanized tubes, and carpets are held with spring clamps. One assembled module looks exactly as shown in the photos! The rack is stable and does not require floor anchoring. We provide an invoice with deductible VAT! Price plus VAT! Isdpjw S Iqmsfx Abbotf

Condition: used, continuous grilling line grilling surface (w x l) : 600 x 7.500 mm Iodpfxeyz Sfne Abbotf bottom contact grilling + hot air (with flip-over) belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

Condition: used, continuous grilling line all stainless steel bottom contact grilling + top hot air suitable for steam injection useful width conveyor 900 mm belt width 1.000 mm Isdeyz Sddspfx Abbetf net length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C belt washing system/hot water ± 60°C (operational supply) adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm new Teflon belt

Condition: used, Type Combi 12110 TF continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1.100 mm net length 11.000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : ± 13.500 x 1.700 x 2.400 mm Itsdpfeyzyl Aox Abbjf independent platen – air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (± 600 kW) with belt wash system

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Itsdpfx Ajyzc Rujbbjf

Condition: used, all stainless steel electrically heated, max. 280°C adjustable speed 11 inspection/cleaning hatches belt width ± 1.000 mm net length ± 7.500 mm with belt wash system outside dimensions (l x w x h) : ± 9.500 mm x 1.600 mm x 2.400 mm Modular construction system Conveyor belt (opening 13 mm) total power 224 kW heating steam pressure: min 3 bar 10 kg/h per valve Ijdpjyyxwhefx Abbetf max. 3 bar 140 kg/h per valve cooking time min/max : 4min 36sec-120min steam injection (to heat up and to improve product yield)

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2011, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22.5, wheelbase: 9,350 mm, color: white, Year of construction: 2011, Axle configuration Tyre size: 385/55R22.5 Make axles: SAF Rear axle 1: Alloy wheels; Max. axle load: 9000 kg Rear axle 2: Alloy wheels; Max. axle load: 9000 kg Rear axle 3: Alloy wheels; Max. axle load: 9000 kg Weights Empty weight: 9.650 kg Carrying capacity: 29.350 kg Iedpfx Aboyyztrobstf GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OL-78-GG Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Hardwood floor - Lift axle

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 6.690 kg Axle 1: left 4 mm right 10 mm Axle 2: left 5 mm right 10mm Iedpfsyxrf Asx Abbjtf Axle 3: left 10 mm right 12 mm