Used Frech W50Zn-Rc for sale (3,473)

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope Lhsdpfjiu Smbex Agtok 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number Ljdpswc Tdzsfx Agtehk System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001

Condition: new, Year of construction: 2025, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2 Cover for drop through area at the subframe with scale/chute 1.0.3 Cover for small parts in the subframe 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1.2 Ejector function package "Technology" including SensiEject 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.0.1.2 Casting assistance package Technology including SensiInject 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.5 Maintenance plus package 5.6.0 Special cable lengths 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional Ljdpfxjx Hp E As Agtehk machine 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.1 Spray rail CR 155

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Lsdjzvnfwjpfx Agtehk Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer Lodpfx Aey Diauogtehk

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Ledpeza E Rmofx Agtshk

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Lhjdpfx Agozv S Rwstek Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working width: 1350 mm Abrasive belt width: 1350–1380 mm Abrasive belt length: 2150 mm 1 contact roller unit 1 combined sanding unit EPS 52 – Segmented electro-pneumatic pressure shoe. Constant workpiece inlet height: 900 mm. Abrasive belt drive with wear-free system. Abrasive belt blowing device Machine safety stop in case of improper use 7" graphic touch-screen display Conveyor belt feed with: adjustable feed speed via inverter, from 3 to 15 m/min. Infeed roller table, 250 mm wide, with rubber-coated rollers. Total installed power: approximately 33 kW Weight: approximately 4,000 kg Includes infeed and outfeed conveyors Few operating hours, used for approximately 3 years Lhedpfx Agszumywjtok

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Lhedewywn Ejpfx Agtek

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 157, working width: 400 mm, overall weight: 2,200 kg, total width: 400 mm, For sale: a complete, used line for applying and curing oil/oil-wax on wooden floors (Soest + Prochera). I am selling a set of four machines that form a line for oil-waxing floorboards, used in a production facility for two-layer parquet in Krotoszyn. The line has not been used for approximately 3 months and has been regularly maintained and repaired during this time. The set includes: 1. SOEST RC-L-400 (Netherlands): application unit with a roller, serial number 157, year of manufacture 05/2017, total weight 580 kg, CE marking. 2. SOEST VP-400-2P-B (Netherlands): spreading/brushing unit (spreading oil, stain, or other coatings using pads and brushes), serial number 264, year of manufacture 05/2017, total weight 480 kg. 3. SOEST UV-3-400 (Netherlands): curing/drying unit, serial number 286, year of manufacture 04/2018, total weight 780 kg, CE marking. 4. PROCHERA SPL1-400C (Poland, Ziębice): brushing/polishing unit, no. 7, year of manufacture 2024, weight 355 kg, power 2 kW, CE marking. All units have a working width of 400 mm and are equipped with integrated conveyor belts and control/electrical cabinets. Total weight of the set: approx. 2,195 kg. Technical condition: unused for approx. 3 months, regularly maintained and repaired. Price: PLN 182,500 net (negotiable), plus VAT. Ledpfx Agozrm Ucetshk Note: the line is sold as used, in its current condition. Before purchasing, an on-site inspection and individual verification of suitability for a specific type of finish are recommended (e.g., UV oil vs. classic oil-wax cured by air).

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm Ledpfx Agjyzt D Eotshk distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m General overhauled Die Casting machine DAW 80 GO with DataLogic control for the use of zinc alloys. Excerpt from the overhaul: · Upgrade of the machine with new control cabinet and operator panel including new electric machine installation · Renewal of the hydraulic system (blocks and valves) · locking unit overhaul Details available upon request The machine is equipped with the following options: Front door motorized, rear door manual handling Cover for drop through area at the subframe Hanging operating desk with monitor 1.0.2 Cover for drop through area at the subframe with scale / chute 3.2.4 Multi-chamber furnace with pump TOC 3.2.1 furnace control cabinet 4.0.1 Hydraulic system for water glycol 6.1.3.1 Wired signal interface for extraction device (DISPO 010) 6.5.2 Equipment package, Remote Service Dialog (RSD) with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.3.1 Lubricant container TD 20 7.4.0.3 Spray rail CR 275 Other options can be offered upon request

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI – Complete line for packaging bulk products For sale: a complete, fully functional line for packaging bulk products, such as: - pellets, - anthracite, - granulated fertilizers, - aggregates, Lsdpfx Aezh N N Usgtjhk - and other bulk materials. The machine allows for packaging products into polyethylene bags weighing from 1 to 20 kg. It handles: - flat bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 receiving conveyor, - frame with an operating platform, - filling hopper with a bucket conveyor, - dust extraction system (2 filters), - screw compressor, - compressed air tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – No. 3016 Weighing dispenser RW-04 – No. 2093 Receiving conveyor RC-50 – No. 3018

Condition: excellent (used), Decoiler FRECH 2 to x 650 mm, coil-inside-diam. 240 - 270 mm, coil-outside-diam. 1500 mm Lhsdszd R Ttjpfx Agtek

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Ledozv N Hpjpfx Agtshk Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: used, Year of construction: 1994, functionality: unexamined, Serial No.: 30194.117.0 Roll bar including wiring harness including robot hand-held control unit including control software and logbook Lhedpfxszvyq Ss Agtsk

Condition: good (used), mileage: 532,000 km, power: 341 kW (463.63 HP), first registration: 03/2000, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: intarder, color: orange, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 7,300 mm, total width: 2,500 mm, total height: 3,250 mm, Year of construction: 2000, Equipment: ABS, air conditioning, differential lock, onboard computer, power assisted steering, = Additional Options and Accessories = - Differential lock - Air horn - Radio/CD player - Rotating beacon - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system Lsdpfx Aezv Ud Tegtohk = Additional Information = Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Dual tires; Differential lock; Tire tread depth left (inner): 30%; Tire tread depth left (outer): 30%; Tire tread depth right (inner): 30%; Tire tread depth right (outer): 30%; Reduction: External planetary axles Rear axle 2: Dual tires; Differential lock; Tire tread depth left (inner): 70%; Tire tread depth left (outer): 70%; Tire tread depth right (inner): 70%; Tire tread depth right (outer): 70%; Reduction: External planetary axles Number of cylinders: 6 Technical condition: good Optical condition: good

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Lhsdeucfwpepfx Agtjk

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, functionality: fully functional, height adjustment type: electric, working range: 400 mm, warranty duration: 6 months, Roller coating machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2023 (demonstration machine – never used in production!) Includes 6 months warranty on used machinery 2-roller coating machine for applying oil Lhjdpfszgvlmox Agtsk The Cosma roller coating system is used to apply oils to solid wood flooring (parquet), paneling, stairs, garden materials, scaffolding wood, and wall decorations, among other things. Working width: 400 mm Suitable for workpieces with a thickness of: 10 - 50 mm Working height: 900 mm Equipped with: - Metering roller, 0.37 kW - Rubber-coated coating roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height indicator Control panel for: Feed speed, amperage per roller, and height adjustment of the rollers

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 6,452 h, input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,535 mm, travel distance Z-axis: 250 mm, number of axes: 4, Equipment: CE marking, documentation/manual, Biesse Rover C6 — CNC apstrādes centrs Pod & Rail, 2008. gads Lhedpjzvy U Defx Agtjk Biesse Rover C sērijas CNC apstrādes centrs ar pod & rail darba galdu. Frēzēšana, urbšana un profilēšana — paneļi un masīvkoks. Iekārta pilnībā funkcionāla. Apskate un demonstrējums zem sprieguma pēc iepriekšēja pieraksta Kalnciemā, Latvijā. Detalizēta tehniskā specifikācija — precīzs modeļa apzīmējums, darba zona, vārpstas jauda, asu skaits, instrumentu magazīna un darba stundas — pieejama pēc pieprasījuma vai apskatē uz vietas. Cena EXW Kalnciems. Palīdzam ar demontāžu un iekraušanu.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 20 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 27 m/min, working width: 400 mm, warranty duration: 12 months, power: 2.5 kW (3.40 HP), Achieve flawless coating results on wood, MDF, and other flat materials with the Soest Roller Coater. Ideal for furniture, flooring, and panel production, it ensures consistent finish quality and high production efficiency. Lsdpfxoxuh T Ee Agtjhk Suitable for applying water-based, UV, LED oil, lye, stain, or lacquer. The RC-L model is specially configured for lacquer applications, featuring dosing and application rollers with blades and a reversible dosing roller. Alternative roller types or the RC-L blade system can be supplied upon request. Contact us for a quotation or visit our Test Center for a live demonstration.

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: Ledey Stahepfx Agtjhk 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm 2. combi unit - rubberroller and electronic segmented pad, eps system working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM Lsdpfeym Rl Nsx Agtehk total 30 kw - total kg ca. 1900

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal glass convection tempering furnace . For max. glass sizes : 1500 x 3000 mm Glass thikness : 4 - 19 mm Voltage : 400 V 50 Hz Control voltage : 230 V V AC 24 Power : Heating : 296 Kw Motors : 262 Kw Total : 558 Kw Current : Heating : 470 A Motors : 450 A Total : 920 A Lhodpfx Aeyw Hgrjgtek

Condition: used, Year of construction: 1995, closing pressure 2200 kN clamping plate 755x755 mm distance between columns 500x500 mm weight of the machine ca. 8 t lock stroke 430 mm capacity of ejector 110 kN ejector stroke 100 mm height of form 250-600 mm column diameter 85 mm casting capacity 130 kN casting plunger stroke 175 mm injection plunger diameter 70,80,90 mm casting volume (DIN 24480) 450,636,856 cm ³ volume cast pressure 335,260,203 kp/cm² casting area 656,846,1078 cm 2 Traverse Stroke 230 mm Used Die Casting machine DAW 200 S with Datavario control for the use of zinc alloys. Lhedpfx Agovxlufstsk Available in accordance Recommendation from the manufacturer is general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: used, Year of construction: 2007, used electric sprayer Spraymotion 411 E for die casting machines. The device has been tested by the manufacturer for function Lsdpfx Agetwfknotjhk Included support unit and spray- and blowrail (system SR) Connection 24 pin plug electric driving unit with 400mm stroke length