Used Fritz Werner Durchmeser 180 Mm for sale (72,583)

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts Ppodjb A Rctepfx Al Sjr -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Condition: used, / weight 295 kg Center height: approx. 180mm dimension Length: about 480mm Width: about 450mm Pedpfx Asykvbdel Sopr Height: 280mm Weight: 110kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head -Height: adjustable Ppodpfx Aledna Acs Ser -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Podpjymga Nefx Al Sspr Total weight: 160 kg

Condition: ready for operation (used), jaw width: 200 mm jaw height: 60 mm span width: 115 mm total height: 130 mm Psdpfjd Hyftex Al Sspr

Condition: ready for operation (used), Horizontal rotary table, manually operated Bore diameter: 145 mm Podpfxewx H Ire Al Sspr Including 3 inwardly stepped jaws Space required: 500 x 500 x 300 mm

Condition: used, Year of construction: 1986, Machine: TC800 Serial number: 25132 Year of manufacture: 1986 Ppsdpfx Alex Eyt Uo Ssr Control: Sinumerik System 8 Tool holder: SK50 Travel: X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallet table surface: 800x800 Pallet exchange system Tool magazine: 60 tools Power supply: 380V 50Hz 55kW.

Condition: used, table diameter 630 mm weight of the machine ca. ca, 0,35 t Pjdpfoymf U Eox Al Sopr table height 220 mm

Condition: ready for operation (used), Year of construction: 1984, Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible. Psdpfx Aloxl Elys Sjpr

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min Podpjwv Havofx Al Sopr - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Year of construction: 1973, condition: used, grinding length 1600 mm centre height 185 mm diamter spiral cutter 55mm mm Pedpfx Aepid Ivel Sspr indexing 4-32 Modul length 5900 mm width 2300 mm height 2000 mm weight 7 t

Condition: good (used), Tailstock make Fritz Werner Tip height adjustable maximum tip height 150 mm minimum tip height 130 mm Foot width 180 mm Base depth 115 mm Width of the Paß stone 14 mm Weight 10 kg Shipping dimensions: L. 210 x B. 120 x H. 140 mm Pedpfx Aed Hurisl Sjpr

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner Pjdon Atchjpfx Al Sspr type FKR 16 year 73 No. 5275/8012 technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: good (used), Universal milling angle head, milling angle head Ppodjb A Nu Ropfx Al Sor -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Condition: used, Fritz-Werner Model TC 800: Pjdsxura Nopfx Al Sepr Working areas: X-axis: 1,600 mm, Y-axis: 1,000 mm, Z-axis: 1,100 mm Workpiece carrier (pallets): Clamping surface: 800x800, 800x1,000 mm, changeover time: 38 sec Rotary table division: 360x1 degree, NC table (B-axis): 1/1000 degree, max. load capacity: 2,000 kg Travel paths: Y-axis (min-max): 150-1,150 mm table top/spindle center; Z-axis: 200-1,300 mm table center/front edge spindle Feed rates: Linear 10,000 mm/min; Circular 7,000 mm/min; Rapid traverse 15,000 mm/min Main spindle: Drive power 32 kW, front bearing diameter 100 mm. Steep taper ISO 50, speed range 20-4,500 rpm Weight approx. 25,000 kg Space requirement incl. pallet changer: approx. 5.8 x 5.2 m Tool magazine: Number of stations: 50; chip-to-chip time 12.5 sec; tool change time 4 sec.

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm max. length between centers: 3000 mm max. grinding length: 2950 mm min./max. diameter of the grinding wheel: 40 / 250 mm Ppodpfxsv Sm Nqo Al Ser main drive power: 8.5 kW With accessories. Movie with machine underpower available

Condition: good (used), Upper support Slide width 145 mm Height 72 mm Bolt circle diameter 180 mm Centring spigot diameter 70 mm Surface 240 x 220 mm Weight 23 kg Transport dimensions: L. 490 mm B. 220 mm Psdpfx Aodq Nviel Sspr H. 270 mm

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm -Groove width: 24 mm Ppedpfsfz Rd Usx Al Ssr -Weight: 234 kg

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, fork thickness: 80 mm, fork width: 180 mm, Telescopic crane 5000 kg with a load center of 600 mm Telescopic length on the hook: 3600 mm with a payload of 950 kg See load diagram for load center capacity One swivel hook with a payload of 5000 kg with a shackle One swivel hook with a payload of 3000 kg with a shackle Pedpsiuh I Aofx Al Sopr Height adjustable via grid Galvanized bolts secured with a rope Fork pockets for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping

Condition: good (used), Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake Ppjdpfx Aob A Nlqsl Ser -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Ppedpfsytpl Uox Al Sjr Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: good (used), Bosch starter motor Ppsdeit Rmfspfx Al Sor -Manufacturer: Bosch starter motor 12 V, unfortunately without type designation -Voltage: 12 V -Teeth: 10 -Solenoid coil: Type Dimensions: see photos -Overall dimensions: 340/180/H115 mm -Weight: 13.8 kg

Condition: excellent (used), Tailstock for PINACHO Lathe Ppjdpfx Aeyr E Dwjl Ssr Centre height: 180 mm Cone: CM3 Spindle exit: 160 mm Sole dimensions: Length 210 mm x Width 160 mm V Spacing: 135 mm In very good condition

Condition: good (used), Year of construction: 1994, Window processing line, CNC window manufacturing plant, window angle system, clamping device Podpfx Asyibvhsl Sjpr -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 180 mm -Geared motor: SSB type SSB DS-SgFFH008 0.25 kW / 405/57 rpm -Encoder: ferrocontrol SAE-1020 H -Number: 2x clamping device available -Price: per piece -Dimensions: 850/450/H240 mm -Weight: 42 kg/pc.

Condition: new, DEMAG rope pulleys / rollers - 19 pieces: 6 pieces diameter 180 mm. / inside 40 mm. 2 pieces - 260 mm. / 45 mm. 6 pieces - 260 mm. / 90 mm. Pedpsu U Rayjfx Al Sopr 1 piece - 310 mm. / 90 mm. 4 pieces - 410 mm. / 90 mm.