Used Fritz Werner Spitzenhöhe Mm for sale (71,152)

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head Hsdpsdna Acsfx Ab Nsnl -Height: adjustable -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg

Condition: good (used), Tailstock make Fritz Werner Tip height adjustable Hnedpfxjd Hurie Ab Nol maximum tip height 150 mm minimum tip height 130 mm Foot width 180 mm Base depth 115 mm Width of the Paß stone 14 mm Weight 10 kg Shipping dimensions: L. 210 x B. 120 x H. 140 mm

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm Hedeb A Rctopfx Ab Nonl -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm swiveling dividing head with three-jaw chuck from Forkardt F250 Hnedpjymga Njfx Ab Nsl Chuck diameter: 250 mm Total weight: 160 kg

Condition: used, / Hedpfxeykvbdj Ab Njnl weight 295 kg Center height: approx. 180mm dimension Length: about 480mm Width: about 450mm Height: 280mm Weight: 110kg

Condition: ready for operation (used), jaw width: 200 mm jaw height: 60 mm span width: 115 mm Hnjdpsd Hyftofx Ab Nol total height: 130 mm

Condition: ready for operation (used), Horizontal rotary table, manually operated Bore diameter: 145 mm Hjdpowx H Irefx Ab Nenl Including 3 inwardly stepped jaws Space required: 500 x 500 x 300 mm

Condition: used, Year of construction: 1986, Machine: TC800 Serial number: 25132 Year of manufacture: 1986 Control: Sinumerik System 8 Tool holder: SK50 Travel: X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallet table surface: 800x800 Pallet exchange system Hjdsx Eyt Ujpfx Ab Nsnl Tool magazine: 60 tools Power supply: 380V 50Hz 55kW.

Condition: used, table diameter 630 mm Hnedpjymf U Esfx Ab Njl weight of the machine ca. ca, 0,35 t table height 220 mm

Condition: ready for operation (used), Year of construction: 1984, Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible. Hnjdpfx Aexl Elyob Njl

Condition: ready for operation (used), For sale here is an optical profile grinding machine by Fritz Werner, type SP. The machine is in very good condition and can be tested on site. Technical data: - Axial relief: 0 to +35 - Lateral relief: ±15 - Grinding carriage stroke, fine adjustment: 36 to 72 per min Hodpfewv Havox Ab Nenl - Maximum grinding wheel diameter: 175 mm - Grinding spindle speed: 1925 to 3850 per min - Maximum workpiece height: 125 mm - Workpiece length: 250 mm - Variable speed motor for grinding spindle: 1400 to 2800 per min Should you have any further questions, please feel free to contact me.

Year of construction: 1973, condition: used, grinding length 1600 mm Hnodpepid Ivofx Ab Njl centre height 185 mm diamter spiral cutter 55mm mm indexing 4-32 Modul length 5900 mm width 2300 mm height 2000 mm weight 7 t

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 year 73 No. 5275/8012 Hnedpfjn Atchjx Ab Nol technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: good (used), Universal milling angle head, milling angle head -Recording: SK 50 Hnedpfx Aeb A Nu Rjb Nsl -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Condition: used, Fritz-Werner Model TC 800: Hnedpfoxura Njx Ab Njl Working areas: X-axis: 1,600 mm, Y-axis: 1,000 mm, Z-axis: 1,100 mm Workpiece carrier (pallets): Clamping surface: 800x800, 800x1,000 mm, changeover time: 38 sec Rotary table division: 360x1 degree, NC table (B-axis): 1/1000 degree, max. load capacity: 2,000 kg Travel paths: Y-axis (min-max): 150-1,150 mm table top/spindle center; Z-axis: 200-1,300 mm table center/front edge spindle Feed rates: Linear 10,000 mm/min; Circular 7,000 mm/min; Rapid traverse 15,000 mm/min Main spindle: Drive power 32 kW, front bearing diameter 100 mm. Steep taper ISO 50, speed range 20-4,500 rpm Weight approx. 25,000 kg Space requirement incl. pallet changer: approx. 5.8 x 5.2 m Tool magazine: Number of stations: 50; chip-to-chip time 12.5 sec; tool change time 4 sec.

Condition: ready for operation (used), Year of construction: 1978, Spline shaft grinding machine Fritz Werner type SKR 30 Y.o.m.: 1978 Hnjdpfxsv Sm Nqs Ab Nel center height: 200 mm max. grinding diameter: 150 mm min. grinding diameter: 10 mm max. length between centers: 3000 mm max. grinding length: 2950 mm min./max. diameter of the grinding wheel: 40 / 250 mm main drive power: 8.5 kW With accessories. Movie with machine underpower available

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm -Groove width: 24 mm -Weight: 234 kg Hjdpfx Aefz Rd Ujb Nsnl

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 5,000 kg, fork thickness: 80 mm, fork width: 180 mm, Telescopic crane 5000 kg with a load center of 600 mm Telescopic length on the hook: 3600 mm with a payload of 950 kg Hnedpfx Abjiuh I As Njl See load diagram for load center capacity One swivel hook with a payload of 5000 kg with a shackle One swivel hook with a payload of 3000 kg with a shackle Height adjustable via grid Galvanized bolts secured with a rope Fork pockets for forks up to 180 x 80 mm Safety chain to prevent the crane from slipping

Condition: used, Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 250 mm -Dimensions: see drawing in the photos Hedpfoqddknox Ab Nonl -Dimensions: 285/180/H280 mm -Weight: 21.6 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head -Peak height: 120 mm -Height: adjustable -Recording: MK2 -Drawing with the photos -Dimensions: 170/100/H130 mm -Weight: 6.4 kg Hodpob Hbxdsfx Ab Nsnl

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tailstock: center height 125 mm -Type: 36642.M2 -Recording: MK2 Hodexfgz Aepfx Ab Nenl -Dimensions: see photos -Dimensions: 255/200/H170 mm -Weight: 7.1 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe -Handover: in the current condition as seen Hjdpfx Ajitdiysb Nenl -Bracket: cracked, see photos -Tailstock: center height adjustable, 155 to 165 mm -Dimensions: see the drawing in the photos -Dimensions: 430/175/H210 mm -Weight: 21.7 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe Hedjit Evwopfx Ab Nsnl -Tailstock: center height 110 mm -Dimensions: see the drawing in the photos -Number: 2x tailstock available -Price per piece -Dimensions: 130/100/H160 mm -Weight: 2.7 kg/pc.

Condition: good (used), Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 110 mm -Drawing: in the photos -Dimensions: 180/95/145 mm Hsded N Uyrjpfx Ab Nonl -Weight: 4.2 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head Hnodpfx Absd Aghhe Nol -Peak height: 135 mm -Height: adjustable -Recording: MK2 -Drawing: in the photos -Dimensions: 240/115/H140 mm -Weight: 11.8 kg