Used Frozen Meat Flaker Barflaker 300 for sale (14,359)

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 9,5 kW dimensions of the machine (l x w x h) : ± 2.100 x 1.070 x 1.150 mm Lredpfx Akoy S Rpgjusl capacity : ± 2.500 kg / h for blocks of max. ± 470 X 600 X 200 mm 3 x 400 V

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW Ledey R Rxrspfx Akuerl dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: good (used), Seydelmann GW 300 Frozen Meat Grinder Thanks to their robust construction and their extremely strong power of motor, Seydelmann Frozen Meat Grinders guarantee a perfect cutting image even when grinding whole frozen meat blocks down to -25 °C (-13 °F). A very high hourly output and a very uniform grain size is achieved with any material. Seydelmann Frozen Meat Grinders can be integrated ideally into production lines. The machine frame is made of stainless steel and completely closed so that all pipes, motors and other parts are integrated into the machine. All edges are rounded and all surfaces on the machine are polished very precisely and designed with a slope so that cleaning water will drain completely from all surfaces. Thanks to embedded covers and the closed bottom of the machine frame water cannot enter the machine and pollution is prevented. The first stage of the size reduction process takes place in the hopper with the worm of the Frozen Meat Grinder. With its extended profile and relief grinding windings, the worm cuts off approximately 8 cm (3.2 in) of the frozen meat block with every rotation, and carries the meat to the cutting set for grinding. The GW 300 is equipped with a two-speed drive. The first speed is for deep-frozen blocks of meat or when using hole plates with small holes and the second speed is suitable for reduction with hole plates with bigger holes. Manufacturer: Seydelmann Model: GW 300 Hole plate diameter: 300 mm Capacity: Up to 10.000 kg/h Power of motor: 78/105 kW Power of AC-6 motor: 140 kW Hopper capacity: 450 Liters Machine dimensions LxWxH: 2.700x1.500x2.400 mm Conveyor dimensions LxWxH: 2.500x900x2.100 mm Ledjy Dquyopfx Akuerl Total weight: 3.300 kg.

Condition: new, Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Lrjdpfxoum Tx Re Akuol Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

Condition: new, Year of construction: 2025, Vacuum mixer is designed for mixing crushed meat. Due to the freqency regulator to achieve speed control. The microprocessor control is by German company ADITEC. The working part is with spiral shape and paddles. TECHNICAL DETAILS: MODEL BM 300 Working volume 300 L/ 220 kg Instaled Power 3 kW Shafts speed frequency regulator Ledpfxjwq D Rbo Akuorl Kind of shafts paddle Unload front valve Power 380 V 50 Hz Air power 6 bar L x B x H 1310 x 920 x 1500 mm.

Condition: refurbished (used), Magurit 053 Fromat The machine is in overhaul. Delivery time on request. Lrsdjh Rd Urjpfx Akusl Information: Drive: 5,5kW Stroke rate: up to 35strokes/min Block weight: up to 25KG cross knife: 3.pieces capacity: approx. 4.500KG/h The housing is completely made of stainless steel. The machine is equipped with a feeder. Errors and prior sale reserved. All information is non-binding. The accuracy of the information contained and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: excellent (used), 130mm meat grinder in excellent condition. Lrjdsyw A Hujpfx Akuel

Condition: excellent (used), Robert riser roto claw its just had brand new electrics. Handles blocks up to 9.5’’ thick and 21’’ wide. Blocks can be stacked using the built in air operated loader to achieve higher production. Lrjdpfjur Ngujx Akuol

Condition: new, Year of construction: 2026, KILIA Angle Grinder Wolf E130 – Frozen Meat Version General Description The KILIA Angle Grinder Wolf E130 in the frozen meat version is specifically designed for processing deep-frozen meat at temperatures down to approx. -25 °C. This machine stands out due to its robust construction, high performance, and hygienic stainless steel design, making it ideally suited for industrial use. Technical DataPlate diameter: 130 mmThroughput: up to approx. 1,200 – 2,700 kg/hHopper volume: approx. 160 – 200 litersMain screw: 2 speedsDrive power: approx. 11 kW – 15 kWVoltage: 400 V / 50 Hz FeaturesFrozen meat configuration up to -25 °CReinforced auger and auger housingFull stainless steel constructionElectrically interlocked safety grateIntegrated control cabinetOperation via push button Lredjywafzjpfx Akuel

Year of construction: 2017, condition: ready for operation (used), A complete system for the comminution of frozen cheese blocks is available. 1) Lifting device Karl Schnell 605, use: lifting of transport trolleys, max. trolley volume: 300l, lifting height: 2380mm, lifting force: 3500N, lifting speed: 4.5m/min, machine dimensions X/Y/Z: approx. 3800mm/600mm/800mm, weight: approx. 600kg. 2) Frozen block shredder Karl Schnell 487, inlet height: 2485mm, outlet height: 737mm, opening width: 680mm, tooth width: 44mm, speed: 65rpm, motor power: 30kW, machine dimensions X/Y/Z: approx. 1800mm/1400mm/2700mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible. Ljdpfex S Rb Njx Akuorl

Condition: good (used), GEA AutoGrind 200 grinder for fresh and frozen meat. Currently missing both screws. Can be sold ’as is’ or complete. Lsdpfx Asx Alncskujrl

Condition: reconditioned (used), functionality: fully functional, Rühle frozen meat cutter Model GFR 450 / 250 5.5 kW Cross cutters: 4 units Lredpjxpickefx Akuol

Condition: good (used), Year of construction: 2011, Frozen meat block grinder – CFS Autogrind 280 Lredpsw Hlqujfx Akujl Manufacturer: CFS Slagelse A/S, Denmark Model: Autogrind 280 Serial number: 5000068108 POS.03 Year of manufacture: 2011 Power supply: 3 × 400 V, 50 Hz Power: 117 kW Current consumption: 225.5 A Maximum safe working load: 35 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Frozen Meat Grinder LASKA WWB 200 with LASKA BA 24 Column Loader Frozen Meat Grinder LASKA WWB 200 Manufacturer: Maschinenfabrik LASKA GmbH Model: WWB 200 Lodsxbt Nlspfx Akusrl Year of manufacture: 2009 Serial number: 13129 Power supply: 3 × 400 V / 50 Hz Rated power: 68 kW Current consumption: 130 A Dimensions: 2500x1700x2000mm The LASKA WWB 200 is a high-performance industrial frozen meat grinder designed for processing whole blocks of frozen meat (often without prior thawing). It allows high-throughput processing of large quantities of raw material in a short time, making it ideal for use in large-scale meat processing plants and industrial food production facilities. LASKA BA 24 Column Loader Manufacturer: Maschinenfabrik LASKA GmbH Model: BA 24 Year of manufacture: 2007 Serial number: 12432 Power supply: 3 × 400 V / 50 Hz Rated power: 1.5 kW Current consumption: 3.5 A Height: 2850 mm The BA 24 column loader is used for the automatic loading of standard Euro bins or cutter trolleys directly into the feed hopper of the main machine (e.g. the WWB 200 grinder). It ensures ergonomic and safe operation for operators.

Condition: good (used), functionality: fully functional, Marel Wilk 280mm for frozen meat Lrsdpfx Akjxx Dngjuol Brand: Marel Year of manufacture: 2009 Throat diameter: 280mm This is a professional grinding machine designed for processing frozen products, suitable for use in various industries. It features a high-quality construction for efficient and precise mincing of frozen products.

Condition: good (used), • overall dimensions 1600x1100x1900 mm; • power 5.8 kW; • power supply 400 V; Ljdpjlzhlcofx Akuorl • weight 600 kg.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Combo kit whit 2x Grinders from the well know company Meateq / Lindmeq whit associated transport screw. 1x Lindmeq mod G300-S55 frozen block grinder year of construction 2016. 1x Meateq G2030L Grinder for frozen / fresh products year 2004. 1x Meateq stainless steel transport screw. Capacity of the line up to 10 000 kg / hour. Perfect for grinding frozen blocks down direct to 2 mm. Dimensions: 275 x 110 x 245 cm Lsdpsxmh Utsfx Akujrl

Year of construction: 2024, condition: used, This listing is for the Frozen in Time F100 Automated Freeze Dryer & Frigel Chiller Package. The unit is in full working condition and is ready for immediate release An exceptional opportunity to acquire a high-capacity, premium industrial freeze-drying setup purchased brand new in June 2024. This turnkey package pairs a high-performance Frozen in Time F100 Automated Freeze Dryer with a top-tier Frigel Air-Cooled Industrial Chiller Unit. Lredpfx Aey Tmrmskuol Meticulously maintained and in excellent working condition, this system was built for reliable, continuous production. The current owner is transitioning away from the freeze-dried sweets market to refocus other business sectors, making this high-demand asset available immediately without the standard manufacturer build lead times. What’s Included in the Sale? - [x] 1 x Frozen in Time F100 Industrial Automated Freeze Dryer - [x] 1 x Frigel Industrial Air-Cooled Chiller Unit - [x] 3 x Complete Sets of Production Trays (To fully utilize the 22-slot configuration) - [x] Original Technical Documentation: Complete manufacturer specification sheets, engineering drawings, and manuals. Technical Specifications 1. Frozen in Time F100 Automated Freeze Dryer Designed specifically for food and industrial processes, the F100 handles the entire cycle from initial conduction freezing to final drying within a single pre-programmed sequence. - Manufacturer: Frozen in Time - Drying Capacity: Rated to freeze-dry 100kg+ of product per 16–24 hour cycle (dependent on product type). - Ice Condenser Capacity: 150kg - Ice Condenser Performance: 130kg / 24 hours - Ice Condenser Temperature: -60°C - Defrost System: Hot Gas - Shelves & Slots: 13 shelves featuring 22 tray slots. - Total Shelf Area: 10.4 m² - Shelf Spacing: 30mm - Chamber Temperature Range: -50°C to +90°C - Vacuum Pump: Premium Pfeiffer Duo 65 system - Refrigeration: Powerful 155m³/h Compressor utilizing R404A refrigerant - Unit Dimensions (H x W x L): 2.1m x 1.8m x 3.6m 2. Frigel Industrial Air-Cooled Water Chiller (MRS Series) An industrial-grade process cooling unit characterized by an ultra-efficient, small footprint designed to sit perfectly alongside processing machinery. - Manufacturer: Frigel - Compressor: High-reliability hermetic rotary Scroll compressor - Refrigerant: Ozone-friendly R410A - Condenser Technology: High-efficiency full-aluminium microchannel condenser. Delivers 20% to 40% higher heat exchange performance and a 60% weight reduction compared to conventional finned-tube models. - Working Parameters: Supports water working temperatures from 0°C to 25°C and is rated for high ambient temperatures up to 45°C. - Maintenance: Robust design that is exceptionally easy to clean using a standard pressure washer.

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm Lredpfx Aksy Tv E Ajuol - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Ljdpfxjy Tvw Se Akuerl Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: like new (used), 300 running metres of Nedcon pallet racking New goods, see pictures! A top racking system of the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 6,5 m Depth 110 cm, blue beam length 2,7 m orange Beam with load / shelf 3050 kg Negotiable price: € 50.280,-- net ex stock Offer consists of: Ljdpfxjfi U Afe Akusrl + 108 pcs. frames pre-assembled, depth 110 cm, height 6,5 m + 642 pcs. beams, length 2,7 m, 3050 kg payload/shelf +1284 pcs. suspension locks + 216 pcs. concrete anchors Load plates, documents etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infill panels galvanised. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads possible on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from a wide variety of areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We clear and - or dispose also f [...]

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm Lredpfx Aoy Rzcujkujl - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: excellent (used), For sale: complete pillar jib crane with a professional ABUS GM3 chain hoist, 500 kg lifting capacity. Sturdy German construction – perfect for lifting and handling machines, moulds, and workpieces in factory halls, workshops, and warehouses. - ABUS GM3 Hoist Specifications: • Capacity: 500 kg • Model: GM3 500.6–111 • Year of manufacture: 1997 • Lifting speeds: 1.5 / 6.0 m/min (two-speed) • Power supply: 3-phase 380–415 V / 50 Hz • Motor: 0.11 / 0.50 kW • Electromagnetic brake • Pendant control station - Jib Crane Specifications: • Total jib length: 300 cm • Working radius: approx. 270 cm • Type: column- / wall-mounted • Steel, rigid construction Lredpfx Aksw Rddyeuol • Manual slewing • Complete with trolley and cables ——— - Why choose this unit? • Renowned ABUS brand – one of Europe's leading crane manufacturers • Complete set, ready for installation • Ideal for use with machining centres, lathes, welding stations • 100% industrial-grade setup – not a DIY store toy - The set includes: • ABUS GM3 hoist, 500 kg • Pendant control • 3 m jib arm • Travel trolley • All wiring and accessories as shown in the photos

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 Lredsy Ilvgepfx Akuel • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg Lodsy Drn Uspfx Akujrl - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)