Used Fruit Washer Elevator Mill for sale (12,522)

Year of construction: 2026, condition: new, The fruit washer elevator mill is made from stainless steel. Firstly, the operator of the machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 3000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Bdedjflpmkepfx Ahmsh Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. - Powerful 4 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel and easy to clean after using.

Year of construction: 2026, condition: new, The fruit washer mill is made from stainless steel. Firstly, the operator of machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 1000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! Bdedsflpfbopfx Ahmoh - Machine has additional table in front of the basin for putting fruits or boxes on it. It facilitates the process of pouring the products into the basin. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - The speed of the belt conveyor is adjustable in the control panel. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. - Machine is easy to clean after using. - Powerful 2.2 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel.

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Bjdpfxetu Ikcj Ahmjdh Weight: 160 kg

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Bjdpfx Ahsy Iyw Somjdh

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. Bdodpfov Srguex Ahmsh • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan Bdjdpfx Aev Hcwtshmoh OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: new, Elevator SA200 with centrifugal mill rotatable capacity up to 1 000 kg/h power: elevator 0,37 (0,5) kW (PS) mill 2,2 (3,0) kW (PS) electric outlet 400V 50Hz (3 phases) Bsdeb I Ucajpfx Ahmedh fuse 16 A dimensions: length 2 620 mm width 700 mm height 2 100 mm insertion resp. discharge height 800 mm weight 185 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 1 ½ “ outside mash discharge height 1 260 mm suitable for pomaceous and stone fruit, berries

Condition: used, Machine ready for operation with a capacity of up to 4 tons, depending on the product. The machine is equipped with a fan for aeration at the bottom of the washer. It can be used for soaking fruit to prevent oxidation. Bdodpfx Ahey Hfp Djmoh Please check out my other listings.

Condition: used, The machine is ready for operation Bdsdpfxeyrxr Io Ahmjh

Condition: used, Length - 470 cm Width - 135 cm Feeding height - 120 cm Bedexn Utrspfx Ahmsdh Discharge height - 160 cm Belt width - 62 cm Cleat height - 5 cm Cleat spacing - 40 cm Frequency inverter - yes

Condition: new, Year of construction: 2026, The fruit washer for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. Initially, the fruits are immersed in water for thorough pre-cleaning. Afterwards, they are transported further via the conveyor belt and carefully cleaned with fresh water. Technical Information • Capacity: 1000 kg/h • Power requirement: 0.75 kW, 230 V, 6 A • Material: WNr. 1.4301, AISI 304 stainless steel • Water connection: 3/4” quick coupling Bdjdpfsv Srp Ajx Ahmjh • Electric control cabinet with IP65 protection rating • High-quality workmanship • Equipped with rollable wheels • Low maintenance requirements Dimensions: Length: 2915 mm Width: 840 mm Height: 2270 mm

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total height: 1,560 mm, total width: 1,100 mm, total length: 700 mm, overall weight: 400 kg, workpiece weight (max.): 100 kg, Apex comminuting mill Capacity > 100 kg / h (The engine is larger than Schutte) Bdsdpez D Tbwefx Ahmsh Stainless steel Simple design Compact size Used machine Screen sizes 2mm + one very small one (Will we get desired particle size)

Year of construction: 2026, condition: new, Specifications: - Performance: 3000 kg/h - Electric demands: 0,75 kW, 400 V, 16 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 750x2100x2800 mm - Output height: 1820 mm - Weight: 135 kg - Tub water capacity: 280 L/shift - Washing water supply: (20-100L/h depending on the setting) - Water connection: 3/4“ quick connector - IP65 certified electronics Bdedofd E Trjpfx Ahmsh The fruits go to the input hopper, after soaking the elevator towards the fruit under the secondary clearwater sprays. Easy to clean, with massive polypropylene/acetal modular elevator, steplessly adjustable speed in both ways, with 2pcs rotating, 2pcs fix wheels. It requires minimal maintenance.

Year of construction: 2026, condition: new, Fruit and vegetable washer AQUA 3000 is designed for washing and cleaning fruits and vegetables before processing. Fresh water and soft brushes leave product intact, wash gently and cleanly. Capacity – 3000 kg/h. Bdedpfx Aoflpg Njhmoh - Entirely made of stainless steel. - Mounted on pivoting wheels. - Easy cleaning of the whole washer after use. - Washer cover can be opened for inspection and cleaning. - Operation at the central command box. - The speed of the washer is adjustable – the speed of the washer dictates the capacity of the processing line. - Gradual exchange of water during the washing: the inflow of fresh water comes in at the exit of the washer, the outflow of the wastewater goes out through the small tube at the entrance of washer. - Long slide at the outlet for draining fruits and removal of dirt (e.g. leaves, branches, etc.).

Year of construction: 2025, condition: new, Capacity up to 2000 kg/h Mill motor 3,0kW Elevator motor 0,37 kW Stepless speed regulation with frequency inverter Automatic start-stop-function for the elevator controled by 3 member sensor in the hopper from the following machine (press, mashpump,..) Stainless-steel construction on 4 wheels (2 tractable, 2 fixed roller) Dimensions: (lxwxh) 3100x675x2200mm weight: 230kg Fold-away sorting table integrated Central wastewaterdrain on the bottom (ø75mm) Bjdpfxe Hmtdo Ahmodh

Condition: new, Nominal rating up to 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Bsdpfxjb I Sy Ss Ahmsdh Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½" inside Connection for washing vessel 1½" outside Height fruit outlet 1750 mm

Year of construction: 2020, condition: excellent (used), The Moba CTW6500 automatic industrial machine designed to denest, wash, stack, and dry plastic egg trays at a capacity of up to 6,500 trays per hour. High Capacity: Processes up to 6,500 plastic egg trays per hour to keep up with large egg grading and processing facilities. Full Automation Cycle: Automatically performs the entire handling and cleaning sequence, including de-nesting (separating stacked trays), washing with water and detergent, drying, and stacking clean trays for reuse. Hygienic Design: Built for poultry farms and packing stations to meet strict biosecurity and food safety standards by removing dirt, egg residue, and contaminants Complete and in good working condition Shipping can be arranged Bdjdpfx Aez D Uurjhmeh

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak Bdedpez Dvrrefx Ahmjh • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Speed: 1,470 rpm Bodpezr Hziefx Ahmedh Protection class: IP55 Insulation class: F Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Control system Star/delta connection possible Spare parts can be supplied for an additional charge.

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, spindle speed (max.): 8,000 rpm, table width: 406 mm, table length: 1,372 mm, rotational speed (max.): 8,000 rpm, overall weight: 3,100 kg, space requirement width: 2,280 mm, space requirement length: 2,900 mm, space requirement height: 2,550 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis: 1.000 mm Y-axis: 500 mm Z-axis: 530 mm Table size: 406 x 1.372 mm Spindle nose: BT 40 Spindle speeds: 1 - 8.000 rpm Controller: Fagor Featured with: Bdodpfevpl I Tjx Ahmoh - Cooling unit - User Manuals Country of origin: Taiwan Motor power: 10 HP Machine LxWxH: 2.900 x 2.280 x 2.550 mm Machine weight: 3.100 kg

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Bdodpfx Aszvgdlshmoh Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Bedpfxozvgvno Ahmsdh Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Bodpfxsq Nf Uwe Ahmsdh Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: ready for operation (used), Year of construction: 1960, Available immediately ex works: Table drilling machine, Scharmann Type FB 125 b Year of manufacture 1960 Complete retrofit in 2020 Spindle 125 mm Metric 80 / SK 50 mounting Quill stroke 800 mm Table 1600 x 1200 mm Table traverse 2000 mm Installation height, spindle / table 1400 mm Table longitudinal travel 2500 mm Spindle speeds 5 – 740 rpm, 7.5 – 1100 rpm Bodpfxjz Hu Dro Ahmsdh With Wohlhaupter machining: 5 – 74 rpm 3-axis Heidenhain digital display Vertical head Large Wohlhaupter turning head Various other accessories Weight 21 tons Price: Euro 7,500.00 + VAT, ex works

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp Bedpfx Ahox Hkd Hjmedh - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition