Used Fuchs Mhl 340 F for sale (35,058)

Condition: used, functionality: fully functional, Year of construction: 2018, Machine in good technical condition; with generator; immediately available; wide range of additional attachments available. Blodpsy Dtarsfx Aqwsl

Condition: used, functionality: fully functional, Year of construction: 2012, - Year of manufacture: 2012 - Machine in good, operational condition - Includes used Genesis GXP300R shear and arm - Available immediately - Wide selection of additional attachments available Bjdpfxjztpi Se Aqwell More information upon request.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, - Machine in very good technical and visual condition, completely overhauled - Immediately available Bsdpfxsy I Ubxo Aqwell - Wide range of additional attachments available

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Blsdpfx Aqjyh A Iijwel Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: used, empty load weight: 2,280 kg, maximum load weight: 11,220 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 12/2005, total length: 6,300 mm, total width: 2,550 mm, total height: 1,130 mm, suspension: steel, tire size: 285/70R19.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel superstructure, 2-axle, SAF axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes Bjdjtq Tr Repfx Aqwoll Body: for 1 skip 2x SAF axle, drum brakes! Loading height approx. 940mm! New and used skips available at extra cost. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Fuchs Terex MHL430 machine for sale. The machine is from 2002. Liebherr 924 Litronic machine for sale. Blsdspq R Sxjpfx Aqwol The equipment is from 2007

Condition: used, empty load weight: 1,300 kg, maximum load weight: 2,700 kg, overall weight: 4,000 kg, axle configuration: 2 axles, first registration: 06/1978, loading space length: 4,000 mm, loading space width: 1,750 mm, loading space height: 400 mm, total length: 6,000 mm, total width: 2,350 mm, total height: 2,700 mm, suspension: steel, tire size: 7.00 R 16, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, mechanical ramps. Bledpfx Aqoi Rnllswel Superstructure: mechanical ramps, wooden floor, ramp dimensions: 1800 x 500 mm. Refurbished for EUR 1,500 including paint! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Year of construction: 2006, operating hours: 14,000 h, condition: used, functionality: fully functional, We offer a used Terex Fuchs MHL 320 material handler, manufactured in 2006. The boom with grapple has been refurbished, and new hoses have been installed. Excellent condition. Warranty included. Type and series: MHL 320 Serial number: 3201100680 Permissible maximum weight: 19500 kg Year of manufacture: 2006 Permissible load on the front axle: 10000 kg Permissible load on the rear axle: 10000 kg Net power at the flywheel: 84 kW Standard operating weight: 19000 kg If you have any questions or require further information, please do not hesitate to contact us. Bjdpfxsy Uv Sre Aqwoll

Condition: excellent (used), fuel type: diesel, color: blue, = Additional Options and Equipment = - Central lubrication system = Further Information = Model year: 2019 Drive: Wheeled Number of cylinders: 6 Unladen weight: 37,000 kg Body brand: FUCHS MHL 350 CE certification: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Model year 2019 CE certificate Deutz 6.1 L6 Tier 4 Final EPA 160kW engine Boom reach 16 m, boom 8.5 m, stick 7.2 m Boom hose rupture safety device Cab: hydraulic cab elevation, Fuchs Fox Cab Air conditioning Superstructure: Standard Fuchs color Central lubrication Bljdoyhzpfjpfx Aqwol Undercarriage: Mobile, 4 outriggers 8x new solid rubber tires 12.00-20 Lighting: various lights on boom, grab, and cab General Information: Type: Bridge crane Model year: 2019 Color: Blue Technical data Number of cylinders: 6 Fuel type: Diesel Gross weight: 37,000 kg Emission class: Stage IV FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY OFFERED FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, Year of construction: 2012, operating hours: 5,042 h, Equipment: ABS, TEREX FUCHS MHL 360 Imported / Accident-FREE Bodpfx Aszt Uuteqwell IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2012 ? BETRIEBSSTD. 2 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: ready for operation (used), Pepperl & Fuchs isolation amplifiers, used, 100% functional. Bljdji Ecdnspfx Aqwel

Condition: used, functionality: fully functional, power: 115 kW (156.36 HP), overall weight: 23,000 kg, fuel type: diesel, color: blue, operation weight: 24,200 kg, maximum load weight: 12,500 kg, empty load weight: 24,200 kg, fuel: diesel, gearing type: automatic, Year of construction: 2005, operating hours: 14,800 h, Equipment: adjustable boom, cabin, gripper hydraulics, We are offering this used Terex Fuchs MHL 331 compressor, year of manufacture 2005. A grapple can be supplied upon request. Bljdpfx Aqsynbggowel Manufacturer: Terex Fuchs Model: MHL 331 Vehicle Identification Number: 331110020 Permissible gross weight: 23,000 kg Permissible front axle load: 11,700 kg Permissible rear axle load: kg Year of manufacture: 2005 Engine power: 115 kW Standard operating weight: 24,200 kg If you have any questions or require further information, feel free to send us a message or give us a call. We are happy to provide you with videos and additional images on request.

Condition: good (used), Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Bsdpfx Aqeztpbzowjll Perforation up to 3 mm in one cycle Quick and easy replacement of perforation strips Possibility of using strips with / without a recess for the hanger. There is a shaker on the delivery. Maximum working width. 340 mm Format / Dimensions min. 120x105mm Format / Dimensions max. 340x340mm Maximum cutting thickness. 3mm Mechanical cycles per minute 80-100 cycles Power supply 380V Weight 1580kg

Year of construction: 2006, condition: good (used), functionality: fully functional, VIVA CODIMAG 340 5-COLOR OFFSET LABEL PRINTING PRESS WITH VARNISHING AND HOT-FOIL STAMPING We are pleased to offer the following well-equipped VIVA CODIMAG 340, designed for the high-quality production and finishing of premium labels. The machine combines five offset printing units with an additional varnishing unit, hot-foil stamping, semi-rotary die-cutting, and inline finishing equipment. Its versatile configuration makes it particularly suitable for wine and spirits labels, cosmetics, food labels, and other demanding applications requiring precise printing and decorative finishing. _____ MACHINE DETAILS Manufacturer: Codimag Model: VIVA 340 Year of manufacture: 2006 Web width: 340 mm Printing process: Offset printing Printing units: 5 offset printing units Additional unit: 1 varnishing unit Availability: By arrangement • 1 additional varnishing unit • UV drying system • Inline varnishing capability • Suitable for high-quality label and packaging applications • Precise reproduction of fine text, screens, and detailed graphics Web Handling • Unwinding unit • Rewinding unit • Automatic web-guiding system • Corona treatment system • Stable web transport throughout the complete production process Decorative Finishing • Hot-foil stamping unit • Hot-stamping equipment • Suitable for metallic, decorative, and premium finishing effects • Inline enhancement of labels without requiring a separate finishing process Converting Equipment • Semi-rotary die-cutting unit • Slitting unit • Perforation unit • Inline converting and finishing capability Quality Control • Camera inspection system • Continuous monitoring of print quality and web registration • Improved production control and reduction of waste _____ WHY THIS VIVA CODIMAG 340? • Premium Offset Printing Quality The offset printing process is particularly suitable for applications requiring sharp details, fine screens, smooth gradients, and high-quality color reproduction. This makes the machine an attractive solution for premium labels in industries such as wine and spirits, cosmetics, pharmaceuticals, and specialty food products. • Five Printing Units Plus Varnishing The machine is equipped with five offset printing units and one separate varnishing unit. This configuration allows multi-color labels to be printed and protected or visually enhanced with a varnish in one production process. • Integrated Hot-Foil Stamping The hot-foil stamping equipment enables metallic and decorative effects to be applied directly inline. Blodsztqi Hopfx Aqwjl This adds significant value to premium labels and reduces the need for a separate offline finishing process. • Complete Inline Production Printing, varnishing, hot-foil stamping, die-cutting, perforating, slitting, and rewinding can be carried out within one production line. This reduces material handling, shortens production times, and improves overall production efficiency. • Semi-Rotary Die-Cutting The semi-rotary die-cutting unit offers flexibility for different label formats and repeat lengths. It is particularly advantageous for short and medium production runs, where frequent job changes and flexible format handling are important. • Integrated Corona Treatment The corona treatment system improves the surface tension of the material and supports better adhesion of inks, varnishes, and coatings on a wide range of substrates.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total width: 6,370 mm, total length: 2,150 mm, total height: 2,300 mm, overall weight: 4,800 kg, 340cm sticky belt printer equipped with 8 NEW Kyocera print heads, printer condition like new. In operational status Bodpfx Ajxvb Ufjqwjll

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 96402260, overall weight: 24 kg, total length: 340 mm, total width: 141 mm, total height: 344 mm, volume flow: 40 m³/h, operating pressure: 10 bar, final pressure: 0.6 bar, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 56 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,800 rpm, protection type (IP code): IP44, New Grundfos UPS 65-60/2 F 340 circulation pump – 3 × 400 V – DN65 For sale: a new Grundfos UPS 65-60/2 F 340 circulation pump. Bjdpozyardsfx Aqwjll This professional Grundfos circulation pump is suitable for larger central heating systems, heating systems, industrial circulation systems, and other applications where reliable water circulation is essential. The pump features a DN65 DIN flange connection and an installation length of 340 mm. The motor has three manually adjustable speeds. Technical specifications Brand: Grundfos Type: UPS 65-60/2 F 340 Product number: 96402260 New 3-phase Power supply: 3 × 400–415 V Frequency: 50 Hz DN65 / 2½" DIN flanges PN6 / PN10 Installation length: 340 mm Max. system pressure: 10 bar PN6 / 15 bar PN10 Max. head: approx. 6 m Max. flow rate: approx. 40 m³/h 3 speeds Max. power: 490 W Max. current: 1.05 A Fluid temperature: -10 °C to +120 °C IPX4D Insulation class F Weight: 24.3 kg A high-quality Grundfos circulation pump for larger heating, central heating, and industrial installations. New pump, unused.

Year of construction: 1999, condition: ready for operation (used), Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible. Bodpfx Aqsyypl Nswsll

Condition: excellent (used), Year of construction: 1996, Huriccan Dambauer chip extraction system Bsdsy Sv Axjpfx Aqwjll Filter area: 40 m² 4 barrels (chip containers) Air volume: 5000 m³ Motor power: 5.5 kW Complete with extraction pipes and pneumatic shut-off valves for 8 machines Self-dismantling (dismantling and loading available at extra cost) Price: 5000.- Available from August 2026

Condition: used, Year of construction: 1977, Technical details attached. Rotary table 4500x4500 , travel 4000mm, max load 100 ton. Floor plates 6 pcs. 2000x4000 Bodpjcfkn Uefx Aqwell It was retroffited with CNC Siemens 840D More pictures and details on request. Video with the machine working is available on request.

Condition: good (used), Year of construction: 1995, For sale: Fuji Flowwrapper type: Bedpfx Aqsvkf Ntowjll FW3400 B year of construction: 1995 including stainless steel infeed belt. (4.50 meters long) Including Linx TT5 printing system - year of construction: 2015 Including de Koningh laser system and an ALTech sticker machine - model ALritma S - year of construction: 2017 It is possible to view the machine here on location. If you have any questions or comments, we would like to hear them! Everything is ready for transport. With kind regards, Leo Holland

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Bjdpoywztgjfx Aqwsll Tools

Condition: used, functionality: fully functional, operating hours: 1,733 h, overall weight: 90 kg, PRODUCT DESCRIPTION & TECHNICAL DATA For sale is a professional industrial 3D printer, model 3DGence INDUSTRY F340. The machine was used in a controlled environment, regularly maintained, and has very low operating hours for an industrial system. The printer is characterized by its robust construction (approx. 90 kg), high mechanical precision, and the ability to process demanding technical plastics without warping. Thanks to the actively heated build chamber (up to 85 °C), materials such as nylon (PA) or polycarbonate (PC) can be printed reliably and with excellent layer adhesion. Furthermore, unlike conventional desktop or prosumer systems, the INDUSTRY F340 meets all thermal and mechanical requirements for processing high-performance plastics such as PEEK (polyetheretherketone). The combination of high extruder temperature and the actively heated build chamber ensures controlled cooling behavior and prevents thermal stresses (warping) in the component. The system is therefore ideally suited for replacing metal components. It enables the additive manufacturing of components with extreme continuous use temperatures (up to 250 °C), excellent chemical resistance, and outstanding mechanical strength values – making it ideal for highly stable applications in the aerospace, automotive, and medical technology industries. KEY DATA: Manufacturer: 3DGence Model: INDUSTRY F340 Operating hours: 1,733 h Build volume: 260 x 300 x 340 mm (X/Y/Z) Weight: approx. 90 kg (heavy-duty industrial mechanics on ball screw spindles) Connection: 230V SCOPE OF DELIVERY & PRINT MODULES: 3DGence INDUSTRY F340 base machine Bjdpfx Aqezrt Agjwoll PRO module: Standard module for PLA, ABS, PETG, PA, carbon fiber reinforced material... HT module: High-temperature module up to 340 °C nozzle temperature for warp-free processing of PC-ESD, PC or CF-PC, unused/in original packaging. Original price was €3500. Integrated, actively heated filament drying chamber (up to 70 °C) for moisture-sensitive materials. CONDITION, SERVICE & MAINTENANCE INFORMATION: The machine is in very good and well-maintained condition, both visually and mechanically. Future-proof and investment protection: The long-term availability of original spare parts, consumables and system components (such as the interchangeable print modules) is fully guaranteed, which ensures a high level of operational safety and reliability in productive use.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 29 h, functionality: fully functional, machine/vehicle number: 404890, overall weight: 2,421 kg, load capacity: 340 kg, arm reach: 3,326 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, A KUKA KR 340 R3330 from a demonstration system with very low operating hours is being offered, complete with KUKA KR C4 controller. Year of manufacture: 2020-03 Operating hours: 29h Equipment includes: - Energy supply axis A1–A3 ES13 092 CTR PNT EPS AIR - Energy supply axis A3–A6 ES36 034 CTR PNT EPS AIR - POWER SUPPLY XFMRless 400V - POWER INFEED XFMRless - INTERFACE Parallel-Safety X11 - INTERFACE Ethernet 1xRJ45 X66 - INTERFACE reference switch X42 - Board package CSP 2xUSB3.0 - MCC-40.1S - System software KSS 8.5 - FINET# M/S 4.1 - eOperation 3.4 - pperSpotTech - gnosisSafety 3.0 - iceConnector pre-installed 2.1 - Reference switch assembly 7m straight - KUKA smartPAD-2 10m - Cable 7m CON GND - Cable set 7m CON X20.1/X20.4 - Robot pedestal height 1000mm mounting frame S960 H1000 Blodpfxjxz Rx Rj Aqwjl

Year of construction: 2016, condition: good (used), Codimag VIVA 340 Aniflo  Age: 2016  Format: 340mm  Paper unwinding Bledpfxetnhyqe Aqwol  Corona unit  Web cleaning  6 x Offset  Hot foil unit.  2 x Flexounit  Web edge control  CHILLER  Register Control  Paper rewind

Year of construction: 2018, condition: excellent (used), Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Year of Manufacture: 2018 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 340 liters For sale is a used Vötschtechnik ClimeEvent C/340/70/5 climate testing chamber with touchscreen control. The testing chamber was developed for professional temperature and climate testing and is ideally suited for environmental simulations, material testing, quality assurance, research, as well as development and stress tests. Technical Data: Type: ClimeEvent C/340/70/5 Test Chamber Volume: approx. 340 liters Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 7 K/min Temperature Change Rate (Cooling): approx. 7 K/min Max. Heat Compensation: approx. 3000 W Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Homogeneity (Spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Climate Range (Temperature): +10 °C to +95 °C Dew Point Range: -3 °C to +94 °C Humidity Range: 10 to 98 % RH Humidity Deviation (Time): ±1 to ±3 % RH Temperature Deviation (Climate Mode): ±0.1 to ±0.3 K Temperature Homogeneity (Climate Mode): ±0.5 to ±1 K Refrigeration System: Refrigerant: R449A / R23 Refrigerant Quantity: 2.50 kg / 0.75 kg Electrical Data: Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 9 kW Rated Current: 20 A Sound Pressure Level: approx. 57 dB(A) Dimensions: External Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Internal Dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: Touchscreen Control Stainless Steel Interior Large Viewing Window Interior Lighting Water-Cooled Version Side Cable Entry Multiple Shelf Levels Ethernet Interface USB Interface Bljdszrwyispfx Aqwel Accessories as Shown in Pictures Shipping Data: Shipping Dimensions (H × W × D): approx. 1830 × 900 × 1890 mm Shipping Weight: approx. 650 kg Condition: Used Optical condition as shown in pictures. Scope of Delivery: Vötschtechnik ClimeEvent C/340/70/5 Climate Testing Chamber Accessories as Shown in Pictures For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: • Functional check and replacement of necessary components • Refilling with legally compliant refrigerant if necessary • Leak test with certificate • Documented test run after successful inspection. Availability: upon agreement. Scope of delivery as pictured. Subject to change, errors and prior sale.