Used Günther Maschinenbau Splitter X2 for sale (5,968)

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 32,000 kg, Year of construction: 2021, operating hours: 1,477 h, machine/vehicle number: SP7097, Drive system: Diesel-electric drive (80 kVA) Throughput capacity: up to 200 t/h Metering hopper: 5 m³ Screen deck: Splitter Twin Wave (2 x 11 kW) Oversize material conveyor: discharge height up to 4,200 mm Gedpfx Afoz H N N Ajuskc Undersize material conveyor: discharge height Transport dimensions: 12,100 x 3,000 x 3,500 mm (L x W x H)

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components. Gkjdpfxoy N Rlvj Afusc

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm Gsdpswhza Usfx Afujkc - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, GÜNTHER GTP 600 MC2 | Combined roller steak tenderizer and meat press (strip tenderizer) Manufacturer: Günther Maschinenbau GmbH Model / Type: GTP 600 MC2 Serial number: 34477 Year of manufacture: 2015 Power supply: 400 V / 50 Hz / 16 A Gkjdpfx Afszu Axcsujc Power: 4.5 kW Overall dimensions: 2250 x 2050 x 2050 mm Working width: 570 mm Belt width: 595 mm (plastic) Pneumatic parameters: working pressure 6 bar, air consumption 100 l/min The GÜNTHER GTP 600 MC2 is an advanced, industrial machine that combines the functions of a roller steak tenderizer and a pneumatic meat press in a single processing step. The machine is designed for professional meat processing plants, butcher shops, and production lines for cooked and cured meat products. Combining surface scoring with mechanical pressure significantly increases the active surface area for brine absorption, improves protein release, and ensures excellent binding and consistency of the product after heat treatment. The unit is factory-equipped for operation in continuous processing lines, including directly after automatic brine injection machines. The scoring rollers and pneumatically controlled pressing roller automatically adjust their clearance to the thickness of the meat piece being processed (pork, beef, or poultry). This ensures a repeatable processing cycle without damaging the fiber structure, which translates into higher slicing efficiency and an aesthetically pleasing appearance of the finished product’s cross-section.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 76-1302, overall weight: 7,900 kg, input voltage: 380 V, input frequency: 50 Hz, Schneider CNC die-cutting machine, Type 2032, with vibrating table, Type 3041 For sale is a high-performance CNC die-cutting machine from the Swiss quality manufacturer Schneider Maschinenbau AG, including a vibrating table, Type 3041. The system is ideally suited for processing and die-cutting cardboard, corrugated cardboard, and packaging materials. Thanks to its robust industrial design, the precise NUM-750 CNC control system, and the automatic material handling, the machine still offers an economical solution for many packaging and display applications today. Technical data, Schneider Type 2032 Year of construction: 1992 CNC control: NUM 750 Power: 28 kW Voltage: 380 V / 50 Hz Operating pressure: 100–240 bar Machine weight: approx. 7,900 kg Swiss Made Vibrating table, Type 3041 Gjdpfxoz R Dnce Afuekc Year of construction: 1986 Power: 3 kW Weight: approx. 1,600 kg Equipment CNC-controlled die-cutting system Hydraulic clamping system Automatic material feed Pneumatic hold-down devices Includes vibrating table Extensive conveying and feeding system Condition The machine comes from industrial use and can be inspected by appointment. Sale includes all existing system components as shown in the photos. Total weight of the system: approx. 9.5 tons Inspection possible at any time by arrangement. Loading and transport are the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a Günther injector for meat, fish, and cheese, type PIH57M from 2017 – a compact, automatic machine for injecting brine and marinade with a capacity of 30 l/min. The device has been designed for the processing of meat, poultry, fish, and cheese, where even distribution of brine, improvement of taste and color, and increased yield of the finished product are important. The PIH series is specially designed for the requirements of poultry and fish injection, with a high needle density for the best possible distribution of brine in the product. The Günther PIH57M injector operates at 400 V, 1.6 A, 50 Hz, requires 6 bar compressed air and provides a capacity of up to 30 l/min with an installed power of 2 kW. The set includes a brine filter, documentation and spare parts, which facilitates quick implementation of the machine into production and subsequent servicing. Technical data: Manufacturer: Günther Maschinenbau GmbH Type/model: PIH57M Year of manufacture: 2017 Gkedpfx Afeyibhqjujc Application: injection of meat, poultry, fish, cheese Power supply: 400 V, 50 Hz Current: 1.6 A Operating pressure: 6 bar Capacity: up to 2000 kg/h Number of needles: 57 Needle diameter: 3 mm Maximum product height: 150 mm Working width: 280 mm Power: 2 kW Equipment: filter, documentation, spare parts Machine dimensions: L: 1800 x W: 800 x H: 2500 mm Their outstanding features are: Rugged construction Compact design High injection accuracy Easy operation Easy to maintain High flexibility Easy to clean

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Gsdpfx Afozilz Nsujkc Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 23.30 E91D-A003, input voltage: 230 V, total length: 125,000 mm, total height: 2,500 mm, total width: 125,000 mm, • Automated sorting and palletizing system with robotics • Robot-assisted sorting, packaging, and palletizing system • Flexible sorting and packaging system with delta and palletizing robots • Automated packaging and palletizing system • Intelligent sorting and palletizing solution with robotic systems • Fully automatic sorting, packaging, and palletizing system • Robot-assisted packaging and palletizing system • Automated packaging line with delta robots and palletizing robot • Modular sorting and packaging system for packaging • Highly automated sorting, packaging, and palletizing system Godpfx Asz Df Aajfujkc Automated sorting and palletizing system with robotics For sale is an automated sorting and palletizing system for processing and packaging various products. The system is equipped with two delta robots for product handling and sorting, an industrial palletizing robot, and a case sealer for automatically closing the packages. After sorting, the products are automatically grouped into packages, case sealed, and then palletized. The system is suitable for high throughput rates and can be adapted to different products and packaging concepts. The modular design allows individual stations to be expanded or integrated into existing production lines. Equipment: • 2 × Delta robots for pick-and-place and sorting • 1 × Industrial palletizing robot • Automatic case sealer • Conveyor technology and system control • Suitable for semi-automatic and fully automatic operation The system is in good condition and can be inspected by arrangement. Further technical information, documentation, and images are available upon request.

Condition: excellent (used), Year of construction: 2015, Adhesive application machine, HH Maschinenbau Type TH 300 Year of manufacture: 2015 Gksdpoz I Rcgsfx Afusc

Condition: used, Year of construction: 2021, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network Gjdpfoz Nia Uex Afujkc - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. Gsdpsz Agv Uefx Afujkc - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. Gksdpfx Afoz Agw Eeuoc - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit Gedpoz Ag Rrefx Afuokc - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Gksdpozz Rpcsfx Afuec - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), Year of construction: 2003, Franz Nahrungsmittelmaschinen elevator Width of the conveyor, effective 30 cmConveyor belt 160 cm flat, 100 cm upward conveyingDouble-sided cutting tablesRoller conveyor 200 x 40 cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Gkjdpfoz Rbu Hsx Afuoc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2003, Franz Nahrungsmittelmaschinen elevator Width of the conveyor, effective 30 cmConveyor belt 160 cm flat, 100 cm upward conveyingDouble-sided cutting tablesRoller conveyor 200 x 40 cm More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Gksdpsz Rbutsfx Afujc Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2003, Franz Nahrungsmittelmaschinen conveyor 450 x 29 cmWidth conveyor 35 cm effective 29 cmFixed speed More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Gsdpfx Afoz Rb Awjuekc See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Gksdpfx Afozw D Hajujc Availability: immediate Inspection and trial run: possible by prior appointment

Condition: good (used), Year of construction: 2003, Franz Nahrungsmittelmaschinen conveyor 85 x 29 cmWidth conveyor 35 cm effective 29 cmFixed speed More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Gsdpfx Ajz Rb Dhjfujkc Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2003, Franz Nahrungsmittelmaschinen conveyor 400 x 29 cmWidth conveyor 35 cm effective 29 cmFixed speed More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Gsdpfxsz Rbz Hj Afuokc Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 2003, Franz Nahrungsmittelmaschinen conveyor Gsdpfx Afjz Rb A Dsuskc 280 x 29 cmWidth conveyor 35 cm effective 29 cmFixed speed More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 48041, table height: 850 mm, table width: 1,200 mm, overall weight: 830 kg, hole diameter: 28 mm, table length: 2,400 mm, Demmeler 3D welding table, Profi Eco Line D28, with accessory cart and extensive original accessories – in new condition. For sale is an original Demmeler 3D welding table, Profi Eco Line System D28, with dimensions of 2400 x 1200 mm. The table was purchased in 2014 and has since been stored in our workshop but has never been used in production. The accessory cart and all accessories were also not used in regular operations. The welding table is in very good, unused condition. In some areas, the original protective film is still in place. Due to long-term storage, minimal surface rust has formed on some edges. However, this does not affect the functionality or the working surfaces. The original invoice (company data blacked out) and a price comparison from 2014/2026 showing a price increase of approximately 31.5% can be viewed upon request. Godpfx Afszwac Rsuokc The scope of delivery includes: Demmeler 3D welding table, Profi Eco Line D28 Original Demmeler accessory cart Extensive original Demmeler accessories (stops, angles, clamping and positioning elements, etc.) as per the inventory list Sale ex works (EXW Munich). Loading and transport are the responsibility of the buyer. Sale exclusively to business customers. Inspection and testing before purchase are expressly desired. Sale is made without any warranty, guarantee, or right of return.

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light Gkedpozr Ircefx Afuoc • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: a brining injector from Günther Type: PI 26 M including filter system GRF 200 K Year of manufacture: 2015 Capacity: approx. 500 – 800 kg/h Stroke rate [strokes/min]: 10-60 strokes Passage diameter: 210 mm Belt length: 1100 mm Equipped with 26 needles, needle thickness (standard) approx. 4.0 mm The injection volume can be continuously adjusted from 2 to 25% Gjdey Uwr Tepfx Afuokc The machine is in very good condition and ready for immediate use.

Condition: used, Year of construction: 2004, machine/vehicle number: 20041227, type of input current: three-phase, total width: 2,500 mm, total length: 12 mm, total height: 1,700 mm, input voltage: 380 V, compressed air connection: 6 bar, overall weight: 5,000 kg, We are offering this used Stock Maschinenbau SFAM 2020 edge banding machine, manufactured in 2004. The associated press belt was manufactured in 2010, and the Meler hot melt glue applicator was manufactured in 2022. Gkjdpszr N Hujfx Afusc The working width for hot and cold glue is approximately 2100 mm! Type: SFAM 2020 Machine No.: 20041227 If you have any questions or require further information, please feel free to send us a message or call us.