Used Gai Gai Mle 6661 Can Isobarometric Filler (2019) for sale (30,747)

Condition: used, Year of construction: 2019, Overview  This isobaric can filling monoblock was manufactured in 2019 by Italy GAI. The GAI MLE 6661 CAN is designed for filling beverages into cans. The machine is already dismantled and stored and is available immediately. Gksdeyudacspfx Afujc Technical data  - Capacity: up to 1,600 cph (33 cl); output up to 650 L/h - Formats: 33 cl standard, 33 cl sleek, 50 cl standard - Application: Can filling - Configuration: Linear monoblock with 6 rinsing valves, 6 filling valves, 1 single-head lid seamer, weight control with expeller, cans washing tunnel, lids storing columns - Lid format: CDL202 - Can diameter: 50 mm – 85 mm

Condition: used, Year of construction: 2016, Overview This GAI MLE 661 BIER is an isobarometric rinsing, filling and crown-capping monoblock for glass bottles, built in 2016 by GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) and put into production in 2018. The block combines rinsing, isobaric filling over 6 filling valves and crown capping in a single frame. It is set up for craft beer in 0.33 L, 0.5 L and 0.75 L glass bottles with crown caps in 26 mm and 29 mm. Cycle times, line speed and production counters are managed from the machine's touch panel. The machine is still installed and under power. Technical data - Manufacturer: GAI Macchine Imbottigliatrici S.p.A. (Ceresole d'Alba, Italy) Gksdpezx Dt Nofx Afujc - Model: MLE 661 BIER (nameplate designation MLE661 BIER 003) - Year of manufacture: 2016 (in production since 2018) - Machine type: isobarometric rinser - filler - crown capper monoblock, glass bottles - Filling valves: 6 - Capacity: up to 1,300 bph - Products: Beer and other carbonated beverages (isobarometric filling) - Bottle formats: 0.33 L / 0.5 L / 0.75 L glass - Crown caps: 26 mm and 29 mm - Control: touch panel with cycle-time, speed and production counters - Power supply: 6.38 kW - Air supply: 6 bar - Dimensions: approx. 480 x 130 x H 230 cm Equipment - Format parts for the listed bottle formats and both crown sizes - Spare parts Condition Used - in production, still installed and under power. Approx. 6,800 operating hours; in December 2025 the machine counter showed 5,982 operating hours and approx. 6.25 million bottles filled. Last maintenance December 2025. Availability From 27 November 2026. Location: Croatia. The machine can be visited in production on request.

Condition: used, Year of construction: 2017, Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data - Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) - Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm Gjdezcu Sljpfx Afuokc - Closure types: Crown caps - Filling system: Isobaric (for beer and carbonated beverages) - Product types: Beer and other carbonated drinks - Incl. dummy bottles and CIP cups - With double pre evacuation systsem for lower oxygen pick up - Machine is cleanable with a CIP system

Condition: used, Year of construction: 2018, Overview  This glass bottle filler and capper was manufactured in 2018 by the Italian company GAI. The MLE 661 Bier model is a compact and precise filling monoblock designed for small to medium-sized breweries and beverage producers. It features Pick & Place technology for pilfer-proof aluminum screw caps (30x20 mm) and an electronic fill height adjustment system for easy format changes. With a capacity of up to 900 bottles per hour, the unit is suitable for bottles ranging from 0.25 L to 1.0 L. The machine is in very good condition and ready for operation. Technical data - Filling system: Isobaric (for beer and other carbonated beverages) - Capacity: 900 bottles/hour - Bottle formats: 0.25 L – 1.0 L Gkodpfxexn A R Ej Afujc - Closure type: Pilfer-proof aluminum screw caps (30x20 mm), Pick & Place system - Electronic fill height adjustment - Stainless steel construction

Condition: used, Year of construction: 2020, Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  - Capacity: - 2,000 cans/hour at 0.33 L Gkjdjxnmv Ejpfx Afujc - 1,500 cans/hour at 0.5 L - Compatible formats: Standard and Sleek cans (not suitable for Slim cans) - Filling system: Isobaric (for carbonated products) - Product types: Beer, cider, soft drinks, or similar beverages - Condition: Used – as new (only 1,500 cans filled)

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data - Capacity: - approx. 70 cans/min (500 ml) - approx. 100 cans/min (250 / 330 ml) - Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) - Application: Filling and seaming of cans (beer, soft drinks, RTDs) - Configuration: 10 filling valves / 2 seaming heads - Filling system: Counter-pressure filling - Filling pressure: approx. 0.15 – 0.4 MPa - Filling temperature: approx. 1 – 4 °C - CO₂ management: Pre-purging and undercover gassing, oxygen reduction system - Seaming system: Lid size 202 (200 optional), manual lid feeding - Control system: Siemens S7-1200 PLC with HMI touchscreen - Drive system: Frequency inverter (Danfoss), unified drive - Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa Gksdpfszbhi Isx Afusc - CO₂ supply: ≥ 0.3 MPa - Water consumption: approx. 0.2 m³/h - Dimensions: approx. 3,153 × 1,980 × 2,350 mm - Weight: approx. 5,500 kg Scope of Delivery - Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer - Control system | Siemens | S7-1200 | PLC with touchscreen HMI - Drive system | Danfoss | Frequency inverter - Filling valve cores | 1 set - Seaming rollers | 1 set (#1 and #2) - Seaming chuck | 1 unit - Can mouth seals | 10 units - Filling valve seals | 10 sets

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 16-head rotary filling machine with 2 checkweighers year: 2020 Gkodpfx Afezlhy Hjuoc

Condition: used, Year of construction: 2012, Overview Krones filling and labelling block from 2012 for glass bottles, offered as one package: a Krones Modulfill filler/capper monoblock with 60 filling valves and 12 capping heads, and a Krones Universella cold glue labeller with two labelling stations for front, back and neck labels. The filler is specified for approx. 15,000 bottles per hour and was observed in production at approx. 14,990 bottles per hour; the labeller is rated for 20,000 bottles per hour. Both machines are in production until early 2027; the labeller has been regularly maintained by Krones. Scope of Delivery Gjdpfxjz I Rfns Afujkc - Filler/capper monoblock | Krones | MODULFILL | 60 filling valves, 12 capping heads, plastic screw caps | 2012 - Cold glue labeller | Krones | UNIVERSELLA | 2 labelling stations (front, back, neck), date coder, glue pumps | 2012 Technical Data - Filler/Capper - Application: filling and closing of glass bottles - Filling system: volumetric filling - Filling valves: 60 - Capping heads: 12, plastic screw caps - Output: approx. 15,000 bottles/hour - Adjusted to bottle sizes: 0.75 l (Ø75 mm x 265 mm) and 0.33 l (Ø65 mm x 175 mm) - Control: Krones iPanel CD - Operating hours: 41,381 h (production counter 40,754 h) - Electrical supply: 400/230 V, AC 3/N/PE, 50 Hz, full load current 36 A - Construction: stainless steel and glass safety enclosure Technical Data - Labeller - Labelling: cold glue, 2 stations for front, back and neck labels - Output: 20,000 bottles/hour - Formats: 0.25 l Vichy, 0.5 l, 0.7 l and 0.75 l GDB and Schlegl bottles - Pitch circle diameter: 600 mm - Container plates without servo drive - Infeed and outfeed direction 90°, counter-clockwise rotation - Date coder installed on the machine - Glue pumps included - Operating hours: 36,000 h Condition Used, both machines in operation in a beverage production environment; labeller regularly maintained by the OEM. Availability Available from . Location: Germany.

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  - Type: Isobarometric filler for bottles and cans Gsdst Rmhmjpfx Afuskc - Capacity: 8,000 bottles / hour (depending on format) - Number of filling valves: 20 - Formats:  - Bottles: 0.33 L Longneck and 0.75 L Cava - Cans: Standard 0.33 L and 0.44 L - Counter-pressure filler - Running direction: left - right - Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m - Operating History: - In operation: June 2021 – June 2024 - Last production run: June 2024 - Dismantled: February 2025 - Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) - Good condition, ready for reinstallation.

Condition: used, Year of construction: 2019, Overview  This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. Gsdpfx Afoxqhvlsuokc It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. Technical data  - Filling system: High-vacuum with liquid ring pump - Capping system: 10-head ROPP (PP) closer - Capacity: Up to 12,500 bph (0.7 L bottles) - Filling valves: 48 - Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) - Control system: Siemens S7 - Cleaning system: CIP with spray balls - Operating hours: Approx. 14,000 h - Working direction: Right to left - Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) - Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery  - Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High-vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control system, CIP-capable, approx. 14. 000 operating hours - Filling tower | ALWID Maschinenbau GmbH | - | 2019 | 3.40 × 1.30 × 1.40 m, part of the system - Format parts | ALWID Maschinenbau GmbH | - | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle - Accessories | 2 EURO pallets with format and head components  

Condition: used, Year of construction: 2016, Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16 Gksdsuhthyepfx Afusc

Condition: used, Year of construction: 2019, Overview  This filler and capper for products such as hand sanitizers, liquids, lotions and creams was built in 2019 by the Chinese manufacturer Terry. The machine is in its original, unused condition and is still in its original packaging. The machine has never been put into operation and is immediately available.   Technical details  Filling volume range: 20-300 ml  Bottle shape adaptation range: ø25-70 mm (For diameters of 10-25 mm, an inverse shape can be used if required. Products with a diameter over ø70 mm can use customized moulds for automated production)  Filling accuracy: 20-100 ml, ±0.5 g; 101-300 ml, ±0.5 %  Production speeds:   Products with 300 ml content ≥15 bottles/minute,   Products with 200 ml content ≥20 bottles/minute,   Products with 100 ml content ≥35 bottles/minute,   Products containing 50 ml ≥40 bottles/minute. (All figures are based on the use of water as a medium.)   Products with 150 ml content ≥20 bottles/minute. (All figures are based on the use of cream as a medium.)  Air pressure source: 0.6-0.8 MPa  Air consumption: 200 L/min  Gkodpeunn Trjfx Afusc

Condition: ready for operation (used), Can diameter range: 60 mm – 125 mm Can height range: 50 mm – 140 mm Gedpfx Afoyyq D Touskc Number of pockets: 18 Capacity: up to 300 cans per minute

Condition: ready for operation (used), Can diameter range: 52 mm – 99 mm Can height range: 50 mm – 140 mm Number of pockets: 15 Capacity: up to 200 cans per minute Godpfx Ajyyq D Hefuokc

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Gkedpfxsuch Tmj Afuoc

Condition: used, Year of construction: 2013, Overview  This isobarometric filler was built in 2013 by the Slovenian manufacturer VIPOLL. This filler is available because it has been replaced by a larger machine. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Capacity: 3,000 bottles / hour (according to manufacturer)  Formats: Currently set up for 330 ml longneck bottle  Counter-pressure filler with double pre-evacuation  Total operating hours: less than 1,000 hours  Running direction: right - left  Filling valves mechanical electropneumatic  Mechanical height adjustment  With color touch screen monitor  Dismantling and transfer took place in December 2023/January 2024  Optional (not included in the price): Bottle conveyor belts incl. loading and unloading table  Gksdpfx Afotm Hv Tsuoc

Condition: ready for operation (used), Year of construction: 2021, operating hours: 288 h, functionality: fully functional, total height: 2,100 mm, total width: 1,200 mm, total length: 4,400 mm, overall weight: 1,800 kg, production capacity: 1,350 unit/h, No minimum price – guaranteed sale to the highest bidder! Automatic, linear, electro-pneumatic counter-pressure filling and capping system + rinser, infeed conveyor, and automatic labeling machine from the manufacturer ENOS! The machine is being sold due to a changeover to aluminum cans. The system is fully operational and has been internally maintained according to the manufacturer's instructions. Note: The seller will handle the dismantling of the machine. The buyer is only responsible for loading the machine for transport. TECHNICAL DETAILS Production capacity: 1,350 units/hour Bottle format: 33cl long neck, crown cap 26mm With the same diameter of 60.4 mm, various bottles are possible (automatic height adjustment) MACHINE DETAILS Usage: 282,000 bottles filled Operating time: 288 filling hours Input voltage: 400 V Gedpfxjzh Dtbe Afujkc Operating pressure: 8 bar Input frequency: 50 Hz Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,400 x 1,200 x 2,100 mm Total weight: 1,800 kg EQUIPMENT Rinser Infeed conveyor Automatic labeling machine

Condition: used, Year of construction: 1966, Overview  Gsdpfx Ajyb Sdvjfuskc This filler and capper block was manufactured in 1966 by German company H&K (H&K VVF 14/3). The machine underwent a general overhaul in 2016, including extensive mechanical and electrical refurbishments. Additional sealing components were renewed in 2023. Technical data  - Capacity: - 2,500 bph - Formats: - Prepared for 0.33 L Longneck - Filling temperature: - 6°C - Overhaul & refurbishment details - General overhaul in 2016: - Pre-evacuation - New rotary ball connection - New stainless-steel table - New electrics - New valve control cabinet in stainless-steel design - 0.33 L guiding set - Sihi vacuum pump - Renewed in 2023: - Seals on lifting cylinders and filling valves - Vacuum and overpressure valves equipped with new seals and springs

Condition: used, Year of construction: 1991, Overview H&K (Holstein und Kappert) SVF 120-D rotary can filler, built in 1991, with 120 filling valves for can format 211/202. Rated output is approx. 80,000 cans per hour with standard 330 ml cans. The filler is supplied together with an Angelus 121 L can seamer from 1991, the rinser that ran with it, and the filler platform. It is controlled by a Siemens S7-400 PLC. The machine is already dismantled and ready for loading. Technical data - Manufacturer: H&K (Holstein und Kappert) - Model: SVF 120-D - Year of manufacture: 1991 - Machine type: rotary can filler - Filling valves: 120 - Can format: 211/202 - Output: approx. 80,000 cans/h (330 ml) - Power supply: 380 V, 50 Hz, 3/N - Rated current: 24 A - Control voltage: 24 V DC - PLC: Siemens S7-400 (CPU 416-2) Scope of delivery - Can filler SVF 120-D with 120 filling valves and can lift cylinders - Can seamer: Angelus 121 L (202), year 1991 - Can rinser operated together with this filler - Filler platform with railings - Yellow H&K control cabinets with Siemens S7-400 PLC and I/O racks - Backup of the Siemens PLC program on USB stick - Documentation: H&K operating manual and spare parts list (French), electrical diagrams, Angelus 121 L parts list and service manual Condition Used, sold as is. The machine is already dismantled and stored in Germany. Loading onto the buyer's trucks is included. Transport requires two trucks: one for the filler carousel and one for the remaining machine parts and components. Availability Immediately. Gjdpfxjz Eivyo Afuskc

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Technical Specifications Gksdpfx Aeyr Nr Sefujc Component 1: Isobaric Counter-Pressure Filler - Manufacturer: Schilpp (Germany) - Model: Contibloc 20/5 - Year of Manufacture: 1974 - Year of Complete Overhaul: 2019 (by Petr Markl) - Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) - Number of Capping Heads: 5 (Crown cork) - Cap Size: 26 mm crown cap - Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) - Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) - Operating Pressure: 8 bar - Outfeed: Integrated small discharge table directly synchronized with the labeller.   Component 2: Linear Labelling Machine - Manufacturer: Enos Euro (Italy) - Model: C5000 - Year of Manufacture: 2019 - Capacity: Up to 5,000 containers/hour (depending on label dimensions) - Application: Self-adhesive labels (Body / Back) - Processed Formats: Bottles, cans, and cylindrical containers - Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers.   Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: - Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. - Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. - Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. - Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. - Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Scope of Delivery - Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). - Labelling Machine: Enos Euro | C5000 | 2019. - Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table.

Condition: used, Year of construction: 2012, Overview This Krones Modulfill filling and capping monoblock, manufactured in 2012, is designed for the filling and closing of glass bottles in beverage production lines. The machine is equipped with 60 filling valves and 12 capping heads and is specified for an output of approx. 15,000 bottles per hour. The machine was observed in operation with a current output of approx. 14,990 bottles/hour. It is adjusted for 0.75 l and 0.33 l glass bottles. The capping machine is suitable for plastic screw caps. The system is operated via a Krones iPanel CD and is installed in a stainless steel and glass safety enclosure. Operating data indicate 41,381 operating hours. Technical Data - Manufacturer: Krones AG - Machine Type: Filling and capping monoblock - Model / Identification: Krones Modulfill - Year of Manufacture: 2012 - Application: Filling and closing of glass bottles - Adjusted to Bottle Sizes: 0.75 l (Ø75mm x 265mm) and 0.33 l (Ø65mm x 175mm) - Filling System: Volumetric filling - Filling Valves: 60 - Capping Heads: 12 - Closure Type Observed: Plastic screw cap - Target Output: approx. 15,000 bottles/hour - Operating Hours: 41,381 h - Production Counter: 40,754 h - Control Interface: Krones iPanel CD - Electrical Supply: 400 / 230 V Godpfozcga Usx Afujkc - Current Type: AC 3/N/PE - Frequency: 50 Hz - Full Load Current: 36 A - Construction: Stainless steel and glass safety enclosure - Condition: Used, observed in operational production environment

Condition: used, Year of construction: 2018, Overview  This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) - Capacity: Up to 3,000 bottles/hour (330 ml) - Filling system: 12 counterpressure long-tube valves - Capping system: 4-head crown capper (26 mm) - Bottle format: 0.33 L (prepared) Gksdsyb S S Hjpfx Afuoc - Working pressure: 2.0 – 2.2 bar - Working temperature: 0 – 4 °C (optimal) - Oxygen pickup: 10–12 ppb dissolved oxygen - Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump - Product pump: Included - CIP system: Automatic and programmable - Machine direction: Left to right - Construction: AISI 316L stainless steel - Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) - Capacity: 2,000 – 6,000 bph - Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm - Labelling stations: 1 (option for second station) - Label type: Self-adhesive (also supports polypropylene labels) - Bottle infeed: Screw conveyor system - Sensors: Self-adjusting photocell for transparent labels - Control system: Processor board with inverter-based speed regulation - Output system: Smoothing unit with adjustable perforated belt - Transport system: 1.5 m conveyor with traction motor - Rotary tables: 1 infeed + 1 outfeed, both motorized - Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer - Function: Seals top and bottom of cartons - Adjustments: Width and height adjustable - Conveyor: Plastic rollers, 1.5 – 4.5 m  

Condition: ready for operation (used), Diameter range: 45–100 mm Height range: 20–115 mm Volume: 0–1000 cc Godpfx Afjyyq E Rouekc Production capacity: up to 100 pcs/min

Condition: ready for operation (used), Diameter range: 45 – 100 mm Gkedeyyq I Eepfx Afuoc Height range: 20 – 115 mm Production capacity: up to 150 pcs/min

Condition: used, Year of construction: 2016, Overview Gedpfevy D Adex Afuekc This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 - Output: 1,800 bottles/hour - Number of rinsing nozzles: 9 - Number of filling valves: 8 - Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) - Electrical power: 6 kW, 400V, 50Hz - Dimensions - Width: 1,400 mm - Length: 3,200 mm - Complete length with labeler: 8,800 mm - Operating hours: 1,370 hours - Complete documentation available Capper | Arol | TSI-Eagle C | 2016 - Pitch diameter: 410 mm - Number of heads: 1 - Type of closure: Standard crown cork - Complete documentation available