Used Ganner - Sofort Verfügbar - Case Press for sale (14,284)

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Rodpfjb Eln Dsx Ankocd Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Rcsdpfx Anstnz Ttsked Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Product Details Crosscut and miter saws Type ZS 200NF Crosscut and miter saw with a maximum cutting height of 200 mm Stable gray cast iron construction Precise ball bearing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick miter adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Rcedpjcnz Rvofx Anked Lower saw blade guard can be connected to an extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on the left and right Left side with scale and stop slide Technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45° - 90° - 25° Miter range vertical 60° - 90° - 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Available from stock in 54634 Bitburg - Immediately available - Upon request, we will also be happy to offer you the saw blade.

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe Rjdpfx Ascr S Econkscd - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Rcsdpfx Ansk H Ic Ujked Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Rcsdpfx Anjff Hdpjkjd Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Year of construction: 2026, condition: new, NEW – Rodpsd Tyaajfx Ankscd - Ideal for removing sheets from your vertical sheet storage system. - For internal transport of sheets to a vertical or horizontal sheet dividing saw. - The continuously adjustable support surface can be precisely adjusted to the height of your sheet saw. - Sheets weighing up to 250 kg can be transported or pivoted by a single operator. Technical data: Support height - vertical: approx. 120 – 340 mm - horizontal: approx. 890 – 1200 mm Maximum sheet size: 5200 × 2100 mm Load capacity: 250 kg Location: In stock at 54634 Bitburg - immediately available - Will be shipped within Germany for €90.00 net.

Condition: new, Year of construction: 2026, Panhans BSB 800 band sawing machine TECHNICAL DESCRIPTION Solid German machine construction Machine stand in shapely modern design torsion-free double-chamber welded steel construction Upper and lower door secured by limit switches Upper and lower precision band saw blade guide APA 2, size 2 Finely planed gray cast iron table Swivel table top up to 45 Dyn. balanced band saw wheels with vulcanized rubber bandages Stop ruler can be used to the left of the saw blade, Fence profile can be reversed Blade tension indicator 1 piece saw blade5775 x 30 x 0.8 mm, tooth width9 mm, No. 3780.301 Mechanical height adjustment of the saw blade guard by hand wheel with locking pinion Rotary cam switch with star-delta start and emergency stop button Mechanical motor brake with main switch and motor protection relay CE-compliant GS tested Left-hand machine stand Rotary cam switch with star-delta start and emergency stop switch Wheel diameter 800 mm Belt speed 1800 m/min Cutting height 520 mm Cutting width 780 mm Blade length max. 5775 mm Rcsdpfx Asr Igzcsnkjd Saw blade width min. /max. 15 mm /4 0m m Optional with special coating Saw blade width min. max. 10 mm / 35 mm Table size 1145 x 760 mm Table height 930m m Suction nozzle 2 x 0 120 mm, Motor power 4 kW / 5.5P S Voltage 400 V / 50 Hz Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 525 kg Location: From stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” Rcodpfehqb Rcjx Ankod 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Rsdpfxsgf Sw Ns Ankecd Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Rcodpfx Aezdazbenksd Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: new, maximum load weight: 29,731 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,580 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer K.SPS platform semi-trailer Immediately available Rcedpfxeqbn R Ns Ankod Technical data: * Outer length 13,640 mm * Internal length 13,580 mm * Axle distance 1,310 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Inner width 2,480 mm * Gooseneck 200 mm * Semi-mounted height 1,180 mm * Axle load 27,000 kg * Kingpin capacity 12,000 kg * Total weight 39,000 kg * Unladen weight 6,269 kg * Pallet capacity 33 Euro pallet load capacity Chassis: * BPW axles with air suspension and disc brakes * 1st axle can be lifted automatically * Wabco brake system * 6 tires 385765 R22.5 * Axle pressure gauge Chassis: * Made of high-quality and durable steel * KTL-coated steel front panel with plywood protection inside with a height of 2,000 mm * Hardwood-coated, 30 mm thick and waterproof hardwood floor, which can take an axle load of 7,200 kg in accordance with DIN EN 283. * Jost supports * LED lighting * Load securing. * K-fix has 96 holes per side, each lashing point has a load capacity of 2,500 kg * Additional 7x2 lashing rings placed on the floor with a load capacity of 5,000 kg * 6x2 container locks suitable for 1x20 ft in the middle, 2x20 ft, 1x40 ft containers * Stake pockets outside + on the floor * Stake box under chassis * Load securing certificate according to standard EN 12642 CodeXL Miscellaneous: * 1x stainless steel toolbox * 4x extra wide boards with LED lighting Chassis color: MB 7350 nova grey For further information please do not hesitate to contact us

Condition: used, first registration: 07/2013, loading space length: 7,250 mm, total width: 2,550 mm, * WECON BDF container chassis WSK 745 NG, length 7.45m, with portal doors * Please schedule an appointment for a viewing. Rcodpfx Anezfd Srskjd * Contact person: Mr. Andreas Vogel * The information provided online is a non-binding description. * It does not constitute a guarantee of any specific characteristics. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors and prior sale.

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed truck with loading crane, immediately available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the complete vehicle with loading crane and aluminum flatbed approx. 600kg - Manual transmission - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Reversing warning - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum flatbed: - Internal dimensions: 2720mm x 1820mm x 400mm - Floor panel 18mm - Floor frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Tool box - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995kg at 3.2m = 815kg, at 4.40m = 575kg, at 5.60m = 400kg, at 6.80m = 300kg, at 8.05m = 220kg - Design according to CE directive (EN 12999) - Swivel range 370° (mechanical swivel range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard chrome-plated Rcedpfoywzygsx Ankjd - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs, extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling by 30° and 180° - CE, incl. M.O.L. - Load hook and attachment brackets - Onboard voltage 12V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions incl. high-pressure filter - Special support legs, support width 3.10m, 1 piece - Additional cost for shortened support legs (by 80mm) - Mechanical arm extension, lifting capacity 1.30m (7.0k) - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block, factory-installed - LED work lights on the knuckle arm, factory-installed - LED for 2 support legs - Optional: Reversing camera with Carplay, shovel holder, 90° rope, ladder carrier / transport frame for front or rear wall, additional storage boxes available. Subject to errors and prior sale. ... Climate control, automatic climate control, VAT can be shown separately, ASR, ABS, trip computer, electric windows front, electric immobilizer, central locking with remote control, trailer coupling, power steering, differential lock, spare wheel, twin tires, cab: short cab, electric windows, work lights, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, emission sticker: 4 - Green, reversing camera

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,850 kg, maximum load weight: 650 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, immobilizer system, soot filter, trailer coupling, FUSO Canter 3S15 aluminum flatbed with loading crane, immediately available. The vehicle is available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500 kg, payload of the ready-to-use vehicle with loading crane and aluminum flatbed approx. 600 kg - Manual transmission - Limited-slip differential - Batteries 2 x 100 Ah - Tow hitch, ball hitch 3500 kg with electrical kit (factory-installed) - Heated exterior mirrors - Automatic climate control Redpfxjwrivlo Ankscd - Radio preparation - Reversing warning system - Auxiliary drive with increased speed - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum flatbed: - Internal dimensions: 2720 mm x 1820 mm x 400 mm - Floor panel 18 mm - Floor frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Toolbox - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995 kg at 3.2 m = 815 kg, at 4.40 m = 575 kg, at 5.60 m = 400 kg, at 6.80 m = 300 kg, at 8.05 m = 220 kg - Design according to CE directive (EN 12999) - Slewing range 370° (mechanical slewing range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard-chromed - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 liters) with filter, mounted on the crane base - Support legs, extendable on both sides, special support, support width 3.10 m - Hydraulic support legs, swiveling 30° and 180° - CE, incl. M.O.L. - Load hook and fastening lugs - Onboard voltage 12 V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions including high-pressure filter - Special support, support width 3.10 m, 1 unit - Extra charge for shortened support legs, by 80 mm - Mechanical arm extension, lifting height 1.30 m (7.0k) - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights located near the control block, factory-installed - LED work lights on the knuckle arm, factory-installed - LED for 2 support legs - Optional: Rear view camera with Carplay, shovel holder, 90° cable, ladder carrier/transport frame for the front or rear panel, additional storage boxes available. Errors and prior sale are subject to change. ... Air conditioning, climate control, VAT can be shown separately, ABS, electronic immobilizer, central locking with remote control, tow hitch, power steering, spare wheel, cab: short cab, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/city/highway), particulate filter, rentable, particulate matter sticker: 4 - Green.

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards Rjdpfozn Drdox Ankscd * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.

Condition: new, functionality: fully functional, empty load weight: 700 kg, maximum load weight: 2,800 kg, axle configuration: 2 axles, tire condition: 100 %, color: silver, Year of construction: 2025, Car transporter REPO R2P – Top quality for safe vehicle transport! This trailer is the ideal solution for the safe and professional transport of: Construction machinery and excavators, as well as other vehicles ✅ Robust and durable construction ✅ High stability and safety during transport ✅ Perfect for private and commercial use This car transporter impresses with its quality, reliability, and well-thought-out design – ideal for anyone who wants to transport their vehicle safely to its destination. Technical specifications: • Brand: REPO • Type: Vehicle transporter • Permissible total weight: 3500 kg • Tare weight: approx. 700 kg • Axles: 2 • Tires: 195/50 R13C • Length: 5290 mm • Width: 2100 mm • Loading area length: 3500 mm • Vertical load: 150 kg The trailer is in absolutely new condition and is ready for immediate use. Location: Rheda - Wiedenbrück Price: €4,390 net plus VAT If you are interested or have any questions, please do not hesitate to contact us! Redpfxoyqyf Tj Ankscd An on-site viewing is possible by arrangement.

Condition: new, maximum load weight: 28,050 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand-new Knapen moving floor trailer K 100 A5060, 92 m³ * BPW axles * First axle configured as a lift axle * Air suspension * Disc brakes Rcodpfx Ajyhtn Nsnksd * ABS/EBS * OptiTire tire pressure monitoring system * 385/65 R22.5 tires * Gear support winches with push compensation * Plastic toolbox * 10 mm floor, 21 planks * Stainless steel wear plate under the floor * Radio remote control for floor, lift axle, and auxiliary headlights * Round bows * Manual rolling tarpaulin * 3-position tarpaulin supports * 1 pair of red LED lights on the rear bow * Side marker lights with indicator function * Reverse warning system * 6 additional reversing lights: at the landing gears, behind the last axle, and on the lighting bracket * Foldable and painted A-plate on the left rear door * Tarpaulin color similar to RAL 9006 * Body painted in RAL 7011 iron grey * Chassis galvanized, not painted !!! The stated sale price is fixed ex works at Knapen Trailers in NL-Deurne !!!

Condition: new, maximum load weight: 29,575 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,289 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Loading space length: 13860 mm ? Width: 2550 mm ? Loading space length (inside): 13620 mm ? Loading space width (inside): 2480 mm ? Wheelbase: 1,310 / 1,310 mm ? Fifth wheel height: 1150 mm ? Permissible total weight: 36,000 kg ? Empty weight: 6425 kg _____ Axles ? KRONE axles with disc brakes ? Tire brand: manufacturer's selection 385/65 R22.5 ? ABS ? Wheel nuts with protective caps ? 1st axle lift axle ? Mechanical supports ? Air suspension ? Wheel chocks ? Brake system: Knorr _____ Structure / attachments Redpfjrbvqgex Ankjcd ? 4x side walls per side ? LM side walls 750 mm high, foldable/removable ? 3 pairs of folding stanchions ? Corner stanchions at the rear at side wall height, as plug-in stanchions ? Corner stanchions at the rear attached to the side ? 10 pairs of stanchion pockets 81 x 81 mm in the outer frame ? 10 stanchion pockets 81 x 81 mm in the middle of the floor ? 12 plug-in stanchions, total length approx. 1,950 mm ? 4 pairs of ship fastening straps on the side EN 29367-2 ? 1 tool box _____ Floor / tarpaulin ? 30 mm thick waterproof panel floor ? Pallet box, closed, for 24 Euro pallets ? Premium visual seal ? Floor loads up to max. 7,000 kg forklift axle load _____ Lighting / electrics ? Multifunctional rear lights (full LED), Hella (Gen.2) ? Side marker lights (flashing function) ? 2 outline lights with rubber arm, LED version ? 2 LED license plate lights _____ Paint finish ? Chassis including outer frame RAL 9005 jet black ? Axles including wheel hubs RAL 9005 jet black ? Attachments black OR GALVANIZED ? Rims silver natural ? Underrun protection white POWDER COATED ? Lighting bracket white POWDER COATED ? Support winches RAL 9005 jet black ? Ship fastening straps RAL 1004 GOLD YELLOW ? Front wall RAL 7035 light gray ? Corner stanchions rear RAL 7035 light gray ? Middle stanchions RAL 7035 light gray ? Side walls ANODIZED ? Rear wall ANODIZED ? Pallet box/storage box lid white POWDER COATED

Condition: new, empty load weight: 6,480 kg, maximum load weight: 26,700 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Equipment: ABS, | Schwarzmüller K-Series 3-axle insulated tipper | Volume: approx. 25 m³ | ABS / EBS | 9-ton BPW axles with disc brakes | Full air suspension | External flap | Tire size: 385/65 R 22.5 | Insulated round tipper body | Platform at the front | Tare weight: 6480 kilograms | Roll cover | Subject to errors, typos, and prior sale. Rcedpfxszpx Upe Anked

Condition: excellent (used), Year of construction: 2013, Ref:11118 . 2013 Schmedt Präleg & Präform Casing-in & Pressing Machines. For casing-in a variety of thin to thick books into flexible or hard cases. Special features:- • Programme selection via touch-screen monitor • Very short set-up and strip down times • Auto wash-up of glue rollers after each book Vertical wing action Twin PVA cold glue tanks Working in conjunction with:- 2008 Schmedt Präform 2100 Pressing & Joint Forming Machine. For pressing a variety of thin to thick hard cover books immediately after casing-in. Suitable for single or assorted books, pressing & burning in the joint in a single operation. Rjdpfxezkgdzj Ankscd Specification, Praleg 18-60: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Specification, PraForm 2100 Book press with groove cutter. Maximum format: 420 x 520 x 100 mm Power supply: 230 V + compressed air.

Condition: new, Immediately available Fassi cranes in the respective versions: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) incl. additional outrigger beam Each with very good equipment: Rsdszln T Hspfx Ankocd - Control system for 2 additional functions with »2 hose guides for e.g. grapple or clamp (5th & 6th control circuit), with the exception of the F545 - Hydraulically operated outriggers, operable via remote control - LED work lights - Scanreco remote control with cross lever, charger and carrying straps - Electronic overload cut-out system - Emergency stop and optical alarm (90% and 100%) with adjustable digital swing limiter - FASSI stability control FSC incl. LMB II - From F235 size onwards: double knuckle system with overextending boom up to 15° - Manual extensions for 5th and 6th sections available at an extra cost (can be ordered individually for each crane) - For Fassi F545 series = Includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request

Condition: new, Immediately available Fassi cranes in the respective variants: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) Rjdpfx Ajzln Tyonkjcd - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) including additional support legs Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for, e.g., grab or clamp (5th & 6th control circuit), except for F545 - Hydraulic outriggers operated via remote control - LED work lights - Scanreco remote control with cross lever, charger, and carrying straps - Electronic overload protection system - Emergency stop and optical alarm (90% and 100%) including adjustable digital swing limiter - FASSI stability control FSC including LMB II - From F235 model size: double knuckle lever system with overextension of the boom up to 15° - Manual extensions for the 5th and 6th section available at an extra charge (can be individually ordered for each crane) - For the Fassi F545 series = includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request

Condition: new, Immediately available Fassi cranes in the respective variants: - Fassi F135 A.0.24 (4-stage hydraulic extension) - Fassi F235 A.2.24 (4-stage hydraulic extension) - Fassi F235 A.2.26 (6-stage hydraulic extension) - Fassi F255 A.2.24 (4-stage hydraulic extension) - Fassi F255 A.2.26 (6-stage hydraulic extension) - Fassi F545 RA2.28 (8-stage hydraulic extension) incl. additional support outriggers Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for, e.g., grapple or clamp (5th & 6th control circuit), except for the F545 - Hydraulically operated outriggers, controllable via remote control Rcsdpfx Anezln Ttskod - LED work lights - Scanreco remote control with cross lever, charger, and carrying straps - Electronic overload cut-off system - Emergency stop and optical alarm (90% and 100%), including adjustable digital swing limit - FASSI stability control FSC including LMB II - From F235 size onwards, double knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th stages available at an extra cost (can be ordered individually for each crane) - For the Fassi F545 series = Includes preparation for winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible through one of our financing partners. This is a non-binding offer. Subject to prior sale, errors, and changes. = Further information = Price: On request

Condition: new, Immediately available Fassi cranes in the respective versions: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) incl. additional support struts Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for e.g. grapples or clamps (5th & 6th control circuit), with the exception of the F545 - Hydraulic outriggers, operable via remote control - LED work lights - Scanreco remote control with cross-lever, charger and carrying straps - Electronic overload protection system - Emergency shut-off and optical alarm (90% and 100%) including adjustable digital swing limiter - FASSI stability control FSC including LMB II - From F235 model size: double-knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th sections available at an extra cost (can be ordered individually for each crane) - For Fassi F545 series = incl. preparation for a winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Rcedpfxszln Tms Ankod Price: On request