Used Gannomat Optima 21 for sale (7,315)

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face Hnsdpfx Aezn Ah Rjkrsu - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Hnsdpfezk Nuiex Akrsu Availability: at short notice Storage location: Röllbach

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Hnjdpfx Akoxnlflorsu

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Hedpozu A D Esfx Akrjnu Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) Hnjdpfx Aszxn S Ajkrsu 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 units Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Tools: Yes, in mm Drilling direction: from below and from the front Swiveling: Manually Swiveling angle: only 0° or 90° Max. pass-through height: 80 mm Hnsdpfx Akjihghrerou Max. pass-through width: 750 mm Number of material clamps: 3 units Type of material clamping: pneumatic Design: Stationary Stop system: only for this series Weight approx.: 400 kg Motor power: 1.5 kW Dust extraction diameter: 120 mm Location: Customer

Condition: new, Year of construction: 2026, GANNOMAT "PROTEC 571" (Drilling, Grooving, Milling) Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Requirement for horizontal Lamello P-system milling - Requirement for milling diameter > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Hnsdpfx Ajzgfwlskrsu Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and milling cutter set 1 HSK mounting set 1 Mounting device HSK63F, simplest operation with the highest level of user comfort thanks to the roller clamping system, no clamping or tightening required, mounted on a stable base or on a workbench 1 Hook wrench for HSK63F collet 462E 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 Counterpressure device from above 1 LED lighting in the machine's working area 1 Tool for vertical Lamello P-system milling Machine with very good equipment including many drills and tools New machine with full warranty. The machine can be viewed and demonstrated in our showroom. A special price can be offered for our showroom machine!!!!!

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. Hedpsw Sguwsfx Akrenu - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 390.829, functionality: fully functional, operating hours: 6,700 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 5,600 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 75 kg, number of axes: 1, number of slots in tool magazine: 1, actuation type: electric, total height: 1,409 mm, total length: 1,484 mm, total width: 2,325 mm, table width: 1,000 mm, Equipment: CE marking, For sale due to acquisition of a new machine: our Gannomat Protec 571 CNC machining center, purchased new in 2018. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for producing furniture components and panels. Its advanced automation and robust construction ensure repeatable results and significant time savings in production. This machining center is especially suitable for workshops aiming to optimize productivity and achieve seamless machining processes. Technical specifications: - Workpiece width X: 60 - 1000 mm - Workpiece length Y: 250 - 5600 mm - Workpiece height Z: 6 - 60 mm - Workpiece weight: 75 kg - Rapid machining: 21 drilling spindles - Stable grooving unit: 8.3 mm saw blade width - Powerful milling unit: 5.5 kW (S1), with reversible rotation - Compact footprint: Less than 3.3 m² Including with the machine: Hedpfxozhrdzo Akrsnu - Drilling tools and 1 pc. HSK63 chuck and tool for modern joinery applications. Optional software: - Gannomat Editor office software: €1,000 (installation and activation by Gannomat for an additional fee) - DXF postprocessor for efficient operation: €1,000 (installation and activation by Gannomat for an additional fee) ATTENTION: Low operating hours. The price of the machine does not include VAT.

Year of construction: 2021, condition: used, For inquiries regarding the equipment, please contact Mr. Herden (tel. number). Optimas vacuum lifter SV 200 E incl. suction plate & other accessories / year of manufacture: 2021 / in stock & immediately available / in excellent condition Price: €2,190.00 net / €2,606.10 gross - Weight: 21 kg - Load capacity: 200 kg - Vacuum pump: 16 m³ Features: - incl. suction plate & other accessories (see photos) Hsdpfx Akjz Ht Hlsronu In our warehouse, we have a very large selection of various equipment that is immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 003674 = Further information = Unladen weight: 21 kg Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - Working dimensions: 3050 x 1250 mm - Main spindle: 11/13 kW (S1/S6) - C-axis Hodpfx Ajwiuz Uekrsnu - Drills: 8 x V, 2 + 2 H - Grooving saw - Tool magazine: 10 slots

Condition: new, Year of construction: 2026, Precise and accurate multi boring machine for casegoods, furniture fittings, line drilling and framework in SYSTEM 32 mm. The DB is a semi automatic boring machine with 21, 27 or 35 precision drilling spindles. Short introduction: • Universal drilling machine for panel and solid wood construction • Holes in the SYSTEM 32 mm • Massive precision drilling unit from GANNOMAT • Easy settings via mechanical digital counters for side and front stops and for drilling height position • Tool-less quick-change system for stopping ruler • Dowel holes, row of holes as well as line drilling, all kind of furniture connectors, handle and through holes, hinges, 3- 5- 7-hole groups, boreholes for drawer slides and guides, holes for door frames and table legs, etc. Hodpjdxz Nkefx Akrsnu

Condition: excellent (used), Description - DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Specifications Manufacturer TRIMOS Model Optima 300 Condition Used Stock Number 0071 Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Hodovkplropfx Akrenu Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s

Condition: used, Year of construction: 2008, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore Hnodpfsyh Hwujx Akrsu - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock

Condition: used, Year of construction: 2008, Single-sided edge banding machine Manufacturer: HOMAG Type: Optimat KAL210/6/A20/S2 Year of manufacture: 2008 Single-sided machine for joint milling of straight workpiece edges, edge banding and finishing of various edge materials from rolls or as strips, up to 20 mm edge thickness, in longitudinal and transverse operation. power control PC22 Modern control system based on Windows PC Technical data - Feed rate 18 - 25 m/min. - Feed rate with profile milling cutters FK11 max. 20 m/min. - Workpiece thickness 8 - 60 mm - Edge material strips max. 0.4 - 20 mm - Edge material rolls 0.3 - 3 mm Joint milling unit - 2 motors, each 3 kW, 150 Hz, 9,000 rpm. for joint milling of the workpiece edge before edge banding Hodpfx Ajzux R Iskrjnu - electropneumatic control of both motors Gluing unit A20 - 2 rollers Quickmelt hot melt adhesive unit - Temperature control electronically with LED display Magazine for 1 roll, manual - for solid edges, strips and rolls - 1 edge feed - 1 roll holder Pressure zone C - 1 driven pre-pressing roller, diameter 150 mm - 6 after-pressing rollers, diameter 70 mm Trimming unit HL84 / 0.8 kW - 2 motors, each 0.8 kW, 200 Hz, 12,000 rpm. - Motors can be manually swiveled for chamfer trimming Pre-milling unit 1.5 kW - 2 motors arranged one above the other, each 1.5 kW, 200 Hz, 12,000 rpm. Profile milling unit FK11, manual - For processing the edge overhang on the top and bottom edges of the workpiece and for milling the front and rear edges of the workpiece Belt sanding unit KS 10 - for sanding straight and solid wood edges, oscillating, sanding pressure manually adjustable Profile sanding unit PS 10 - sanding from below, for sanding profiles, sanding pressure manually adjustable Automation package Chamfer / Radius KAL210/6/A20 - Automatic adjustment of the infeed fence - Automatic adjustment of the pressure zone - Pneumatic adjustment from chamfer to straight trimming - Pneumatic adjustment of the trimming motors for flush or overhang trimming - Pneumatic adjustment of the pre-milling unit for flush or overhang milling - Automatic adjustment from chamfer to radius milling during profile milling - Pneumatic adjustment PN10 / FA11 - Electronic height adjustment

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Hnodszr N H Ujpfx Akreu Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Working area X: 3050 mm Working area Y: 1300 mm Hnjdpfxjz Du T Uj Akrou 11 kW electro-spindle, with vibration sensor, HSK-F63 connection C-axis with interface for machining units/aggregates Interface prepared for FLEX-5 unit Vertical drilling bits: 13 Horizontal drilling bits: 4 Adjustable saw blade at 0°/90° 12-position disc tool changer EASY-EDGE gluing unit Sawing and cutting unit Combined edge milling and finishing unit Working table with 6 rails Control: Power Control with PC85 Software package for AV-PC Remote control Chip conveyor belt Vacuum pump Safety mats Protective nets The following components are included in the sale: Cutting unit, Edge milling unit, Gluing unit, 6 narrow suction cups, 6 large suction cups, 2 machine manuals, 3 CDs, including the WoodWOP CD.

Condition: used, Year of construction: 2004, Control unit, factory reconditioned used cleaned functionally tested Hnodpfsz I D Aajx Akrsu partially overhauled Manufacturer: Ganner Type: 252/N Year of manufacture: 2004 Machine no.: 756 484 CE type-tested Adhesive container capacity: 5 liters Dowel diameter: 8 mm Dowel length: 30 mm With adhesive supply Water flushing Glue gun mobile Space requirement approx. L x W x H mm: 600x600x1200 Weight approx. kg: 100 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected without guarantee and warranty

Condition: excellent (used), Year of construction: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 - 13 m/min Feed motor output: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st unit: Steel contact roller, diameter 160 mm Motor output: 15 kW, 400 V, 50 Hz 2nd unit: Combination unit with rubber-coated contact roller (Sh 65), rigid sanding shoe Motor output: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd unit: Cleaning brush Multi-function display Multi-function lever (conveyor belt, workpiece thickness adjustment) Electronic belt oscillation Pneumatic conveyor carpet oscillation Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Units with emergency braking system Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta start Complete documentation Note for used machines: • Specifications and prior sale subject to change. • Stated prices are ex works – loaded free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine on site. • Special agreements are only possible in written form. Hodjychqzopfx Akrsnu (We only respond to inquiries providing your address and telephone number!)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Hedpfx Ajxqf U Sskronu Flexibility: Can also be configured for food and chemical products in other versions of the machine.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction Hnedpez I Eggjfx Akrju the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Selekta Dowel Insertion Machine Year of manufacture: 2026 Dowel insertion machine with a pistol grip for simultaneous gluing and dowel insertion. Designed for professional and efficient dowel processing in furniture and frame construction. • Consistent dowel insertion depth Hnjdpfsvxgm Nsx Akrou • Always consistent and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easiest cleaning of the gluing system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with incorrect diameter and length by the Auto-DL selector • Dowels are not driven in based on force; the dowel insertion depth is set independently of the bore hole depth • Recoil-free, extremely lightweight, and comfortable glue-dowel insertion pistol • Significant time savings compared to using a glue bottle and hammer

Condition: good (used), Year of construction: 2001, Fully functional dowel insertion machine, Gannomat Selekta 252. - Electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch COATING - APPLYING GLUE - INSERTING - 8-stage glue quantity selector switch with time preselection via electronic control - Selector switch GLUE/WATER for flushing the glue system #CS2 Hnodjz I Eh Depfx Akrju

Condition: used, Year of construction: 1993, Used Machine Year of Manufacture: 1993 Features and Technical Specifications: - 2-jaw drill chuck for shanks up to 20 mm in diameter - Pneumatic position adjustment - On 2 levels: 0–100 mm - Max. drilling depth: 150 mm - Precision indexing rail, 12 mm - Center locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor: 1.5 kW Hnedpjz I Uffefx Akrou - Speed: 2,800 rpm - Lowerable slotted hole drilling unit with 2 program cams - Machine weight: approx. 310 kg - Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop)

Condition: used, Year of construction: 2023, New demonstration machine! List price: €93,317 net. Basic machine complete in standard configuration for drilling and grooving: Detailed technical data can be found in the data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4-axis drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool changing, motor 5.5 kW (S1), 1000-20000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connection power 12 kVA, rated current 17.5 A, fuse 32 A, voltage 400 V, 50 Hz, 3 phases (without transformer). Power supply system TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: coupling connector (quick coupling) ¼, DN7.2, brass, factory side. To the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle dia. 80 mm. Extraction speed 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight approx. 1650 kg (with options!). Machine installation location: In principle, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: ProTec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via slat curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for ProTec shaft ø 10 mm with clamping surface (JSO): 1 HW roofing drill 5x70mm (cutting depth 35mm), LH # 30566-5-05035-L3. 1 HW dowel drill 5x70mm (cutting depth 35mm), RH #30540-5-05035-R4. 1 HW dowel drill 5x70mm (cutting depth 35mm), LH #30540-5-05035-L3. 1 HW dowel drill 8x70mm (cutting depth 35mm), RH #30540-5-08035-R. 1 HW dowel drill 8x70mm (cutting depth 35mm), LH #30540-5-08035-L2. 1 HW dowel drill 10x70mm (cutting depth 35mm), LH #30540-5-10035-L1. 1 HW countersink drill 15x70mm (cutting depth 35mm), LH #30300-5-15070-L1. 1 HW countersink drill 20x70mm (cutting depth 35mm), RH #30300-5-20070-R1. 1 HW countersink drill 35x70mm (cutting depth 35mm), RH #30300-5-35070-R. 1 HW grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LH, Leitz. Only for chipboard and MDF, solid wood on request and by agreement. Tool holder HSK63 F, 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Carbide shaft cutter Z1+1, 1.0 pcs. with WP drill cutter ø20, S25, LH 120, L2/L3 58 mm. Grooving cutter HW indexable insert Hnedpfjw Tfzfjx Akrju